Fatty Acids & Lipids · Core range
MCT Powder
Medium-chain triglycerides (C8/C10) in a starch matrix · CAS 73398-61-5 · Microencapsulated MCT oil powder 50%
Microencapsulated MCT oil powder at 50% oil load, with a declared C8/C10 profile, for sports powders, sticks and beverages where the oil load and the fatty-acid profile have to be declared.
- MCT oil
- ≥50.0%
- Minimum order
- 1 kg
- Indicative lead time
- 1–7 days
- Standard packing
- 1 kg foil pouch25 kg fiber drum
Specification
What the certificate will report
| MCT oil | ≥50.0% |
|---|---|
| C8 (caprylic acid) | 55.0–65.0% of oil (GC) |
| C10 (capric acid) | 35.0–45.0% of oil (GC) |
| Appearance | White to light yellow powder |
| Moisture | ≤5.0% |
| Peroxide value | ≤1.0 meq/kg |
| Carrier | Modified starch, declared |
| Particle size | ≥95% through 40 mesh |
| Heavy metals | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg |
| Microbiology | APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent |
| Chemical formula | Medium-chain triglycerides (C8/C10) in a starch matrix |
| CAS | 73398-61-5 |
| Marker set | MCT oil ≥50%; C8 55–65% and C10 35–45% of oil |
| Appearance | White to light yellow, free-flowing powder |
| Solubility | Dispersible in water; the oil is encapsulated in a starch matrix, not dissolved. |
Primary method GC — the method behind each figure matters as much as the figure. How the COA is built →
Technical documentation
Six documents, one standard.
Quality, procurement and regulatory pages for MCT Powder. Each card opens the full document; a sample COA and the technical data sheet are available on request.






What to confirm before ordering
- Name the oil load and the C8/C10 profile; MCT is a family, not a single fatty acid.
- Ask for the fatty-acid profile and peroxide value; a total MCT figure hides the C8/C10 ratio.
- Confirm the carrier and the oil load; both change the label and the fill weight.
- The powder is dispersible, not soluble; trial the matrix for taste and ringing.
Buyer questions
Practical answers
What is MCT Powder specified to?
MCT oil: ≥50.0%. The full specification adds C8 (caprylic acid), C10 (capric acid), Appearance, Moisture, Peroxide value and the contaminant panel. Every figure on the batch COA is reported with the method used to produce it.
Which form of MCT Powder is this?
The catalog grade is Microencapsulated MCT oil powder 50%. Other salts, hydrates, carriers and particle sizes are separate specifications; the grade page compares the alternatives and explains what changes in the label, the assay and the fill weight.
Which dosage forms does this grade fit?
Sports powders, Powder sticks and drink mixes, Functional beverages. The grade is selected against the dosage form and the target dose: capsule fill and tablet flow depend on bulk density and particle size, while a stick pack or gummy depends on dissolution and taste.
Which documents are supplied with the batch?
A batch-specific COA, TDS, SDS, allergen and GMO statements, an origin record and a residual-solvent statement. Third-party heavy-metal or microbiological reports can be arranged, and the specification comparison is issued before the first order.
What is the minimum order and lead time?
1 kg minimum, packed in a 1 kg foil pouch from a released lot; 25 kg fiber drums are available as quantities scale. 1–7 days after specification and order confirmation. Samples are typically 100–500 g and carry the COA of the lot they were drawn from.
Documentation
Released with every lot
- Batch-specific certificate of analysis against the agreed specification
- Technical data sheet with form, CAS or species, carrier, storage and packing
- Safety data sheet in the 16-section format
- Allergen, GMO and origin statements signed for the batch
- Residual-solvent statement for the crystallisation system
- Specification comparison against the specification you sent
What this page does not claim
MCT Powder is sold as an ingredient powder. No therapeutic or disease claim is made here, and no finished dosage form is offered. In the EU, claims for the nutrient or ingredient are restricted to the authorised list; in the US, structure/function statements are the responsibility of the brand that makes them and require substantiation. We publish specification, method, form and documents — that is the boundary of what we write.
Next step
Send the spec. We will confirm the form.
A competitor COA, a label claim or a target dose is enough to start. We reply with the grade we can release, the documents behind it and the questions we still need answered.