05 Compliance

The regulatory file for squalene

Technical document 05 · Reviewed 2026-11-19 · Squalene

On this page
  1. What the file contains
  2. European Union
  3. United States
  4. Contaminants and limits
  5. Label and claims
  6. The document set
  7. Checklist before the first order

Squalene is usually bought as a food or supplement oil, and squalane as a personal-care ingredient. The regulatory file has to name the exact material, the use and the destination before it can cite a route. The buyer's regulatory team confirms that route. This page lists the documents and checks that belong in the file, so the specification and the commercial pack can be reviewed together.

In one line

Squalene is usually a food or supplement material and squalane a cosmetic one; the file has to name the use, the market and the exact material before it can cite a route.

What the file contains

A complete file answers four practical questions. What is the material, and which specification version is being bought? Which lot is being released, and what does its certificate report? Which limits and labelling rules apply to the finished product? And what changes if the source, the process or the pack changes? The certificate answers the lot question, the technical data sheet answers the specification question, and the safety data sheet answers the handling question. None of them answers the route question on its own.

The first decision is the use. Squalene sold as a food or supplement oil follows the food framework; squalane sold for personal care follows the cosmetic framework. The two files are not interchangeable, even when the materials come from the same olive source. A cosmetic-grade certificate does not establish a food use, and a food-grade certificate does not authorise a cosmetic claim.

Allergen and GMO statements belong in the squalene file, together with the olive-origin record, the residual-solvent statement and any declaration the customer asks for. If the lot is missing one of them, name the gap before the order rather than at the port. A versioned list — specification revision, COA date, origin certificate — holds up better in an audit than a folder of undated PDFs.

European Union

The EU file is built from the specification, the contaminant results and the label. General food law, labelling and contaminant rules apply alongside any product-specific route. For a food or supplement use, the relevant instruments include Regulation (EC) No 178/2002 on general food law, Regulation (EU) No 1169/2011 on food information, Directive 2002/46/EC on food supplements and Regulation (EU) 2023/915 on contaminants. If the source or the process raises a novel-food question, Regulation (EU) 2015/2283 is the framework to check. For a personal-care use, Regulation (EC) No 1223/2009 applies instead.

The buyer's regulatory team identifies the route for the destination member state and confirms that the specification matches the material being placed on the market. As of this review, the current consolidated text is the reference, not a summary. Great Britain and Northern Ireland are checked separately: GB food law and, where relevant, the GB register apply in Great Britain, while Northern Ireland follows the EU framework.

United States

The US file is built around the exact dietary ingredient or food substance and its intended use. A supplement use sits under the dietary-supplement framework, including the current good-manufacturing-practice rules in 21 CFR 111; a conventional food use needs a food-additive or GRAS basis. If the material is a new dietary ingredient, the notification route in 21 CFR 190.6 is the one to check. The label and the claim are reviewed separately from the certificate.

The supplier should be able to name the basis it relies on and point to the supporting document. The buyer confirms that the basis covers the finished product, the dose and the claim, and that the source statement is adequate for the label. As of this review, the current text of the relevant regulation controls.

Contaminants and limits

The contaminant panel is a finished-product calculation, not only a drum result. The table below pairs the catalog limits with the usual supplement references; the current destination text and the daily dose decide the final limit.

Contaminant limits to confirm for the finished product
ParameterCatalog limitFinished-product check
Lead (Pb)≤3 mg/kgEU supplement reference 3.0 mg/kg; confirm the current text
Arsenic (As)≤2 mg/kgNo harmonised EU supplement limit; the customer or market limit applies
Cadmium (Cd)≤1 mg/kgEU supplement reference 1.0 mg/kg; check the category
Mercury (Hg)≤0.1 mg/kgEU supplement reference 0.10 mg/kg
Moisture≤0.1%Hydrolysis and shelf-life check in the finished format
Process contaminants—Mineral-oil and polycyclic-aromatic-hydrocarbon statements where the market requires

An oil that comes from a refining stream deserves a process-contaminant question. The answer may be a statement, a test result or a justified absence, but it should be in the file before the first shipment. The contaminant calculation uses the dose: a limit expressed per kilogram of oil is not the same as a limit per daily serving.

Label and claims

The label names the material, the quantity and the source in the form the destination requires. “Squalene” and “squalane” are different names and cannot be used interchangeably. The claim review is separate: the brand's regulatory reviewer confirms that the wording is allowed for the product, the form and the market. No disease-related claim is made for this material on this page, and the certificate does not approve a claim.

A structure-function statement, a nutrient content statement and a cosmetic function statement each follow a different rule set. The same oil can be a food ingredient in one market and a cosmetic ingredient in another, and the label language changes with the use. The file should record which use the label was reviewed against.

The document set

The core set is the specification, the certificate of analysis for the lot, the technical data sheet and the safety data sheet. For a food or supplement use, add the source declaration, the allergen statement, the GMO statement, the residual-solvent statement and the process-contaminant statement where applicable. For a personal-care use, add the cosmetic product-safety information that the brand's file requires.

Certificates of analysis, halal or kosher statements and customer-specific declarations are supplied where available, not assumed. The document list should carry a version and a date, and the specification revision on the certificate should match the revision on the purchase order. The product hub carries the catalog data; the COA page explains the certificate; the identity page covers the analytical evidence; the methods section explains the tests; the quality page describes the release file.

Checklist before the first order

  • Specification version, CAS number and source are named.
  • The intended use — food, supplement or personal care — is stated.
  • COA, TDS, SDS, allergen, GMO, origin and residual-solvent statements are on file.
  • The contaminant results are converted to the finished-product dose.
  • The label and the claim have been reviewed for the destination.
  • The source, process and pack are under change control.
  • The quotation, the specification and the certificate refer to the same version.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation