03 Stability

Squalene stability: oxidation is the failure mode

Technical document 03 · Reviewed 2026-11-19 · Squalene

On this page
  1. The oil in the sealed pack
  2. When the oil is blended or emulsified
  3. What drives degradation
  4. A stability protocol for the ingredient
  5. The finished formula changes the answer
  6. How the shelf life is set

Squalene fails by oxidation. The oil takes up oxygen at its six double bonds, forms hydroperoxides, and then darkens and develops an odour as those hydroperoxides break down. Moisture is a release limit at ≤0.1%, but it is not the main storage risk. Light, heat, headspace oxygen and metal contact are the variables that decide how long a lot keeps.

In one line

Squalene fails by oxidation, not by moisture: peroxide value, colour and odour move first, and the pack, the headspace and the antioxidant decide how fast.

The oil in the sealed pack

The catalog moisture limit is ≤0.1%, measured by Karl Fischer. That is a release gate, not a storage allowance. Squalene is hydrophobic and does not dissolve in water, but water can be entrained during processing or condense into a partly used container. A rising moisture result is a handling signal more often than a chemistry signal.

The real change in the drum is oxidation. Squalene is a hydrocarbon with six double bonds and several allylic methylene groups; oxygen attacks those sites in a chain reaction. The first products are hydroperoxides, which are not volatile and are not visible. As they decompose, aldehydes and ketones appear, the colour moves from pale yellow towards a darker tone, and the odour becomes heavier. By the time the odour is obvious, the peroxide value has usually been rising for some time.

The pack is the first control. The 1 kg amber bottle and the 25 kg HDPE drum both limit light and air, but neither is absolute. Keep the container closed, keep the headspace small, and keep the store cool. A modified atmosphere is not implied by the standard pack; if one is needed, it belongs in the specification.

When the oil is blended or emulsified

Squalene is insoluble in water, so an aqueous drink or a lotion carries it as an emulsion. The oil sits in the dispersed phase, and the interface between oil and water is where oxygen, metal ions and heat do their work. A stable emulsion can still oxidise faster than the neat oil because the surface area is larger and the aqueous phase can carry metal catalysts.

In an oil blend the material is miscible with other triglycerides and esters. That dilutes the squalene but does not stop the reaction; the blend's own unsaturation adds to the oxygen demand. The antioxidant has to be chosen for the whole oil phase, not only for the squalene fraction, and its level has to be justified in the stability work.

A hot-fill or pasteurisation step adds a heat load that the bulk oil never sees. A softgel avoids the water, but the shell and the plasticiser can transfer moisture and oxygen over time. The bulk stability result is the starting point; the finished format needs its own data.

What drives degradation

Factors that move squalene during storage
FactorWhat it doesControl
OxygenForms hydroperoxides; peroxide value risesLow headspace; sealed pack; minimal opening
LightAccelerates oxidation; colour and odour changeAmber bottle; opaque drum; dark store
HeatRaises the oxidation rateCool store; cool process; no hot hold
Metal ionsCatalyse hydroperoxide breakdownStainless steel contact; avoid iron and copper
MoistureHaze and hydrolysis in a blend≤0.1%; dry store; closed container
AntioxidantSlows initiation and propagationTocopherol or rosemary extract, if the specification allows

These factors are not independent. A warm, bright store with a half-empty bottle combines heat, light and a large oxygen headspace. The useful stability question is not “is squalene stable?” but “stable in which pack, at which condition, for how long?”

A stability protocol for the ingredient

A useful protocol states the pack, the storage condition, the time points and the tests. Long-term storage at 25 °C/60% relative humidity and intermediate storage at 30 °C/65% relative humidity cover the warehouse; accelerated storage at 40 °C/75% relative humidity stresses the pack. A light-exposure arm covers the failure mode that a dark incubator misses.

Test assay, refractive index, iodine value, peroxide value, acid value, colour, moisture and microbiology at each point. Peroxide value alone can mislead, because hydroperoxides decompose and the number falls again while the oil is still deteriorating. Pair it with p-anisidine or a TOTOX calculation so that the secondary products are counted. Report the individual results, not only a pass statement, and identify the pack and the lot family.

Ask for the stability summary for the pack you will buy, not for a different pack from the same product family. A 25 kg drum and a 1 kg bottle have different headspace and different opening histories; the data belongs to the pack.

The finished formula changes the answer

A softgel fill has low water activity, but the shell can transfer moisture and oxygen. Check the fill's peroxide value at release and after storage, and check the shell for brittleness or leakage. An oil blend needs a compatible antioxidant and a check that the other oils do not accelerate the reaction. An emulsion needs the oil-phase antioxidant, a metal-sequestering agent where appropriate, and a hold time validated at the process temperature.

A powder on a carrier adds surface area. The oil is spread over the carrier, so more of it is exposed to air, and the carrier's moisture can move into the oil phase. Measure the peroxide value of the extracted oil, not only the powder's appearance, and keep the powder in a sealed, opaque pack.

The formulator decides whether an overage is needed; that is a label and stability decision. It does not repair a pack that lets oxygen in, and it does not replace a stability arm on the finished format.

How the shelf life is set

We do not publish a single shelf-life number for squalene, because the pack and the storage condition set it. The assigned retest period belongs on the specification and is supported by the stability file for that pack. A number without a pack, a condition and a test panel is not a shelf life; it is a claim.

After the retest period, re-assay the retained sample before extending use. Do not extend by assumption, and do not carry a bulk figure across to a repacked bottle or a softgel. The product hub lists the standard packs; the COA page covers the release tests; the MOQ page covers pack and lead time; the methods section explains the analytical tests; the quality page describes the release workflow.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation