How we prove a catalase lot is catalase
A catalase lot is identified by what it does and what it is made of, not by a single activity figure. The activity assay under stated conditions proves the catalytic reaction; IR and the protein pattern support the protein; the declared source organism and the carrier explain the rest of the powder. The certificate should let a reader reach those conclusions from the data rather than from a “conforms” line.
Identity is three agreements: activity for the reaction, IR and protein for the preparation, and the source with the carrier for everything else in the powder.
The identity layers
A certificate can name the right material and still fail to prove it. The layers below are separate questions, and each one needs its own evidence. A supplier who answers only the first has described the paperwork, not the powder.
| Layer | Question | Test | What it proves |
|---|---|---|---|
| Document | Is the enzyme and source named? | Name, CAS 9001-05-2, EC 1.11.1.6, production organism | Paperwork only |
| Activity | Does it decompose peroxide? | UV assay at 240 nm under stated conditions | The reaction, not the protein |
| Protein | Is the protein consistent with catalase? | IR, SDS-PAGE, protein assay | The preparation |
| Mass balance | What else is in the powder? | Loss on drying, carrier, ash, activity per gram | Dilution or an inert fraction |
The activity layer is necessary and not sufficient. A heme protein with catalase-like activity can move the same absorbance at 240 nm, and a peroxidase can consume peroxide in the presence of a donor. That is why the activity result is read with the protein evidence, not instead of it.
Specific activity and the dilution ratio
Specific activity is the activity divided by the protein content, usually written in units per milligram of protein. It answers a different question from units per gram: U/g describes the powder as sold, while U/mg protein describes how much of the protein is active enzyme. A crude preparation and a purified one can be standardized to the same U/g and still differ in specific activity, and that difference matters when the dosage form is small.
The pair also prevents a common misreading. A simple dilution with a protein-free carrier lowers U/g and protein per gram together, so specific activity stays roughly the same; specific activity is not a dilution detector. What detects an undeclared carrier is the mass balance: the declared activity, the measured activity, the loss on drying and the carrier or ash fraction have to add up to the powder in the pack. A concentrate standardized from 20,000 U/g to 10,000 U/g with a declared carrier is normal; the same drop with no declared carrier is a specification gap.
A falling specific activity across lots, at a stable U/g, points to more inactive protein or a change in the recovery step. A rising one can point to a purer preparation or to a protein assay that is under-reading. Either way, the ratio is a trend to review, not a single result to accept.
X-ray diffraction: what it can and cannot show
Catalase is a protein, and a protein powder is amorphous. An X-ray diffraction scan of the catalog powder should show a broad halo, not a set of sharp reflections, and that halo cannot identify catalase. XRD is not the identity test for this material, and a certificate that reports “XRD conforms” without a pattern or a reference has added very little.
The technique is still useful for the question beside identity: what else is crystalline in the powder? A sharp pattern can reveal a crystalline carrier or diluent — lactose monohydrate, sodium chloride, a crystalline sugar — or an inorganic filler that the specification did not declare. It can also compare a lot with a reference preparation that contains the same carrier. Ask for the reference pattern and the detection limit, because a crystalline phase below the method's limit will not appear.
What adulteration looks like
| Adulterant | What it does | Signal | Test |
|---|---|---|---|
| Carrier dilution | Lowers U/g and adds mass | Declared or undeclared carrier; sugar or ash | Activity, loss on drying, HPLC or IR |
| Heat-inactivated enzyme | Protein remains, units fall | Low U/g with normal protein; low specific activity | Activity plus protein |
| Another enzyme | Wrong activity and label | No catalase activity or a mixed protein pattern | Catalase assay, SDS-PAGE, specific assays |
| Heme protein | Peroxidase or catalase-like activity | Peroxidase signal without matching units | Peroxidase assay, spectrum, SDS-PAGE |
| Undeclared source | Different protein and label | Pattern does not match the declared organism | SDS-PAGE, peptide mapping, audit |
The activity assay is a functional test, and function can be mimicked by a different protein. The protein pattern is the layer that separates a genuine catalase preparation from a look-alike, and the declared source is the layer that separates one catalase from another. Colour is the weakest signal: white to off-white covers a wide range, and a carrier or a drying change can move it without moving the identity.
How to write identity into the specification
- “Catalase (EC 1.11.1.6), CAS 9001-05-2; production organism named.”
- “Activity ≥10,000 U/g by the UV hydrogen-peroxide assay, with the pH, temperature and starting peroxide concentration.”
- “Identification by activity assay and IR; report both results.”
- “Protein by a stated method; specific activity reported where identity is disputed.”
- “Loss on drying ≤8.0%; carrier declared; particle size ≥95% through 40 mesh.”
- “Protein pattern against a reference lot on request; lot code traceable to the pack.”
Five questions for the supplier
- Which organism produced this lot, and what carrier or granulation aid is in the powder?
- What is the exact unit definition, with the pH, temperature and starting peroxide concentration?
- Can you provide the IR spectrum and a protein pattern against a reference lot?
- What is the specific activity in U per milligram of protein, and what explains the level?
- If the lot is disputed, will you accept a joint re-test on the retained sample?
Five direct answers amount to an identity file; a single activity percentage does not. The product hub carries the catalog values; the COA page shows where each figure sits on the certificate; the grades page explains what a carrier and a source change do to the material; the catalase and SOD comparison covers the unit question; the FTIR method note explains the spectral comparison; the quality page describes how the file is released.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation