02.1 Catalase vs SOD

Catalase vs superoxide dismutase: two antioxidant enzymes, two units

Technical document 02.1 · Reviewed 2026-11-19 · Catalase

On this page
  1. Two reactions in sequence, not one reaction twice
  2. The units are not interchangeable
  3. Two assays with different failure modes
  4. What a blend does and does not add
  5. Naming both enzymes, and the units beside them
  6. Choosing one, the other, or both

Catalase and superoxide dismutase are both enzymes that act on reactive oxygen species, but on different molecules. SOD converts superoxide into hydrogen peroxide and oxygen; catalase then decomposes that hydrogen peroxide into water and oxygen. Their activity units come from different assays and cannot be converted into one another, so a blend of the two is a formulation with two specifications, not a stronger version of either.

In one line

SOD makes hydrogen peroxide and catalase removes it: two substrates, two assays and two units that cannot be exchanged.

Two reactions in sequence, not one reaction twice

Superoxide dismutase catalyses the dismutation of the superoxide radical: two superoxide molecules and two protons give one hydrogen peroxide molecule and one oxygen molecule. Catalase catalyses a different step: two hydrogen peroxide molecules give two water molecules and one oxygen molecule. The two reactions connect, because SOD produces the substrate that catalase removes, but neither enzyme performs the other's reaction. Catalase does not act on superoxide, and SOD does not remove hydrogen peroxide.

The two reactions and their enzymes
EnzymeSubstrateProductsEC number
Superoxide dismutaseSuperoxide (O2•−)Hydrogen peroxide and oxygen1.15.1.1
CatalaseHydrogen peroxide (H2O2)Water and oxygen1.11.1.6

Catalase is a heme enzyme, usually a tetramer built from four subunits of roughly 60 kDa, and the heme is where the peroxide is split. SOD is a family rather than one protein: the copper-zinc, manganese and iron forms share the reaction but not the sequence or the metal at the active site. The commercial SOD is one defined protein from one source, and the metal at its active site is part of its identity. The phrase “antioxidant enzyme” describes the chemistry in the assay; it is not a claim about a finished product.

The units are not interchangeable

A catalase unit is a rate: one micromole of hydrogen peroxide decomposed per minute at pH 7.0 and 25 °C, followed at 240 nm, with a stated starting peroxide concentration. One unit is about 16.67 nkat. A superoxide dismutase unit is a relative inhibition: the amount of enzyme that inhibits the reduction of a tetrazolium dye such as NBT by 50% in the xanthine and xanthine oxidase system, under stated conditions. The original format used cytochrome c rather than NBT, and the two formats do not give the same number for the same sample.

The SOD unit therefore depends on the indicator, its concentration, the pH, the temperature and the amount of xanthine oxidase used to generate superoxide. The catalase unit depends on the starting peroxide concentration, because the enzyme is inhibited by its own substrate at higher concentrations. Ten thousand catalase units per gram and ten thousand SOD units per gram are two unrelated quantities. No conversion factor exists, and a “total antioxidant units” figure that adds the two is arithmetic without a method.

The same rule applies across the enzyme range: a lysozyme unit is a turbidimetric drop in a bacterial suspension, and a protease unit is a rate on a protein substrate. Every one of those numbers is defined by its assay. The lysozyme page makes the same point for a third enzyme, and the SOD product page carries the values for that material.

Two assays with different failure modes

The catalase assay is direct: the sample is diluted in buffer at pH 7.0 and the fall in absorbance at 240 nm is followed as the peroxide disappears. The sample must be clear, because turbidity adds apparent absorbance, and a blank corrects for the powder's own colour. The rate must be read over a window where the decrease is linear; a high starting concentration can slow the enzyme and bend the curve.

The SOD assay is indirect. Xanthine oxidase generates superoxide, superoxide reduces NBT to a coloured formazan, and SOD competes for the superoxide and lowers the colour. The laboratory builds a standard curve and defines one unit as the amount giving 50% inhibition. The readout is a difference between two rates, so coloured extracts, reducing agents and turbidity interfere more than they would in a direct assay. A sample that scavenges the dye chemically can look like SOD without being SOD.

This is why a chemical antioxidant assay is not a substitute for either enzyme method. An ORAC or DPPH result measures radical scavenging in a defined chemical system; it does not measure catalase activity or SOD activity, and it cannot be converted into units of either. The analytical methods library sets out how these assays differ, and the release logic is described on the quality page.

What a blend does and does not add

A blend of catalase and superoxide dismutase is a formulation. Each component needs its own activity, its own unit definition and its own assay, and the ratio between them is part of the specification. A certificate that gives one combined “enzyme activity” for the blend has not specified either component. The ratio should be measured on the finished blend, not calculated from the weigh-up, because each enzyme can lose activity at a different rate during blending and storage.

The blend also inherits the weaker conditions of its components. The two enzymes have their own pH and temperature profiles, and a blend that is held at the optimum of one may be outside the working range of the other. If a protease is part of the same multi-enzyme blend, it can digest both. An overage applied to the blend as a whole does not protect each component in proportion, so each activity needs its own stability data.

Naming both enzymes, and the units beside them

The label should name each enzyme separately, with the source where the destination requires it, and should state the activity in a unit that the specification defines. Catalase is CAS 9001-05-2 and SOD is CAS 9054-89-1; the EC numbers belong in the specification. A proprietary blend that hides the individual activities leaves the buyer unable to verify either one, and a ratio that is not declared cannot be checked.

“Antioxidant” on a label is a claim question, not a chemistry question. The enzyme names describe what the preparation does in an assay; whether the finished product may carry a claim, and in what wording, is decided by the destination rules and the buyer's regulatory review. No disease-related claim follows from an activity figure. The catalase grades page covers the single-enzyme specification; the catalase product page carries the catalog values.

Choosing one, the other, or both

Choose catalase when the target is hydrogen peroxide, and SOD when the target is superoxide. If a formula wants both reactions, specify both enzymes and assay both; do not use one as a substitute for the other on the strength of a unit number. Do not convert catalase units into SOD units, and do not use a chemical antioxidant result as evidence of either enzyme. A blend can be the right product, but only when the ratio, the two assays and the two stability files are part of the specification.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation