02 Grade comparison

Catalase grades: activity, source and what carries it

Technical document 02 · Reviewed 2026-11-19 · Catalase

On this page
  1. What a grade actually fixes
  2. The catalog grade and its versions
  3. Powder, granule and solution behaviour
  4. Dose arithmetic before the label
  5. What to write into the specification
  6. When a version is the wrong choice

Catalase is sold by activity per gram, by source and in the physical form the dosage step can handle. The catalog grade is a white to off-white powder at ≥10,000 U/g by the UV hydrogen-peroxide assay; granulated and diluted versions change the flow, the bulk and the weigh-up, not the reaction the enzyme catalyses. The choice starts with the units a serving needs and the mass the dosage form can carry.

In one line

A catalase grade is an activity plus whatever carries it, so the U/g figure and its assay conditions matter more than the word on the label.

What a grade actually fixes

An enzyme grade is an activity figure plus the material that carries it, plus the source. “Catalase powder” is not a specification: 10,000 U/g and 40,000 U/g are both powders, and a fourfold dilution of the stronger one is not a different enzyme. Activity per gram is not purity. Protein content and specific activity describe how much of the powder is active enzyme, and a carrier-diluted grade can show a normal specific activity while carrying half the enzyme per gram.

The source is part of the grade. Fungal catalase, typically from an Aspergillus species, and catalase from bovine liver are different proteins with different molecular weights and different pH and temperature behaviour. They also sit differently on a label and in a regulatory file, so a switch between them is a new ingredient, not a new lot. The production organism and the carrier should be named in the specification before the first order.

The catalog grade and its versions

Catalase grades and the changes each one makes
AttributeCatalog powderGranulatedDiluted on carrier
Activity≥10,000 U/gSet per order; the binder adds massLower U/g, set per order
Particle size≥95% through 40 meshCoarser, fixed by the granulationFollows the base powder
Flow and dustFree-flowing, some finesBetter flow, less dustDepends on the carrier
Mass for 10,000 U1 g1 g if the activity is unchanged2 g at half the catalog activity
Added materialNone declaredBinder or granulation aidCarrier named on the label
Typical fitCapsules, tablets, blendsHigh-speed filling and blendsLow-dose capsules and premixes

The last row is a starting point, not a rule. A granulated powder is still a powder; it is the particle build that changed. A dilution is a different activity per gram and a different weigh-up, and the carrier becomes a declarable ingredient.

Powder, granule and solution behaviour

The catalog powder is white to off-white and free-flowing at 40 mesh. It dissolves in water to a clear to slightly turbid solution, which is the form a stick pack or a liquid premix will use. The fine fraction makes dust and static, so a containment step matters at the weighing bench; granulation reduces both and improves flow on a high-speed filler, at the cost of a binder and a slightly slower dissolution.

Carrier dilution raises the bulk volume per unit of activity. A formulator who fills a fixed capsule weight and switches to a diluted grade will lose activity per capsule unless the fill weight changes. The carrier also brings its own moisture, particle size and label name, and a lactose or maltodextrin carrier is not an inert detail in an allergen or sugar declaration. Particle size and bulk density should be agreed for the blend, because a fine enzyme and a coarse excipient separate in a tumble blender.

Moisture is capped at ≤8.0% on the catalog sheet. That limit protects activity during storage more than it protects flow, and a powder held above it loses units faster.

Dose arithmetic before the label

The arithmetic is simple and easy to get wrong. At 10,000 U/g, a 500 mg capsule fill holds 5,000 U, and a 10,000 U serving needs 1 g of powder. At half the catalog activity the same serving weighs 2 g, which may no longer fit the capsule. An 800 mg tablet at 10,000 U/g carries 8,000 U before any granulation aid is counted. These are arithmetic examples, not intake recommendations.

If the stability file shows activity loss over the declared shelf life, the formulator may add an overage so that the label figure holds at the end of the period. That is a stability and labelling decision, and it does not repair a grade that is wrong for the fill weight. A higher-activity concentrate reduces the mass per serving; a dilution increases it and adds carrier to the label. Both are legitimate, but the label, the fill weight and the specification have to be rebuilt together.

What to write into the specification

  • “Catalase (EC 1.11.1.6), CAS 9001-05-2; production organism named.”
  • “Activity ≥10,000 U/g by the UV hydrogen-peroxide assay, with the unit definition, pH, temperature and starting peroxide concentration.”
  • “Identification by activity assay and IR; report both.”
  • “Loss on drying ≤8.0%; particle size ≥95% through 40 mesh.”
  • “Carrier, granulation aid or diluent declared; state explicitly when none is used.”
  • “Heavy metals and microbiology as listed; storage condition and retest period on the specification.”
  • “Source organism, carrier and granulation fixed under change control.”

A grade that is not written this way is a description, and a description cannot be released against. The catalase product page carries the catalog values; the COA page shows how activity is reported; the catalase and SOD comparison explains why a U/g from another enzyme is not a substitute; the stability page covers the loss that drives an overage.

When a version is the wrong choice

A dilution is the wrong choice when the dosage form cannot carry the extra mass, when the label declares a fixed activity per serving, or when the customer's release method was written around a concentrate. Granulation is the wrong choice when the application needs fast dissolution from a fine powder, as a stick pack usually does. A source switch is the wrong choice whenever the label, the allergen file or the destination market names the original source; matching U/g does not make the two preparations interchangeable.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation