The regulatory file for catalase
Catalase is an enzyme preparation, not a single chemical, so the regulatory file starts with what was fermented: the production organism, the carrier and the activity definition. It then adds the destination route, the intended use and the finished-product dose. The buyer's regulatory team confirms whether the preparation is permitted for that use and market; this page lists the frameworks, limits and documents that belong in the file.
The specification describes the enzyme preparation; the regulatory file shows the route, the carrier and the label for the destination.
What the file has to answer
A complete file answers four questions. What is the material, and which specification version is being bought? Which lot is being released, and what does its certificate report? Which route and label rules apply to the finished product in the destination? And what changes if the source organism, the carrier or the process changes? The certificate answers the lot question, the technical data sheet answers the specification question, and the safety data sheet answers the handling question. None of them answers the route question alone.
One distinction runs through the whole file: an enzyme used as a processing aid and an enzyme declared as an ingredient are different regulatory objects, even when the powder in the drum is identical. The intended use should be written down before the documents are assembled, because it decides which statements matter and how the label reads. The file should also hold the allergen, GMO, origin and residual-solvent statements, plus the carrier declaration, each with a version number.
European Union
Food enzymes in the EU sit under Regulation (EC) No 1332/2008. Only food enzymes included in the Union list may be placed on the market as such and used in foods, and the entry is specific to the enzyme and its source and conditions of use. The buyer's regulatory team confirms that the entry covers the production organism and the intended use, and checks the current consolidated text rather than a summary. General food law, labelling and contaminant rules apply alongside: Regulation (EC) No 178/2002, Regulation (EU) No 1169/2011, Directive 2002/46/EC for food supplements and Regulation (EU) 2023/915 for contaminants.
Great Britain and Northern Ireland are checked separately. The GB file uses the current GB rules and register; Northern Ireland follows the EU framework. The buyer confirms which applies to the destination. A processing aid is not declared in the ingredient list in the same way as an ingredient, so the label consequence depends on the use, not only on the specification.
United States
The US file is built around the exact substance and its intended use. A dietary ingredient in a supplement needs a lawful basis — a GRAS conclusion, a documented history of use, or an NDI notification — while a food enzyme used as a processing aid follows a different route. The supplier should be able to name the basis it relies on and point to the supporting document; the buyer confirms that the basis covers the finished product and the claim. Supplement manufacturing sits under the cGMP rules in 21 CFR 111, and the Supplement Facts panel names the dietary ingredient and its source where required.
The label and the claim are reviewed separately from the certificate. A specification can be correct and a label still wrong for the market, and the reverse is also true.
Contaminants and the finished-product dose
The contaminant panel is a finished-product calculation, not only a drum result. The table below is the catalog gate; the destination text and the daily dose decide the final limit.
| Parameter | Catalog limit | What the file adds |
|---|---|---|
| Lead | ≤3 mg/kg | Lot result, method and finished-product calculation |
| Arsenic | ≤2 mg/kg | Lot result and the agreed limit |
| Cadmium | ≤1 mg/kg | Lot result and any category exception |
| Mercury | ≤0.1 mg/kg | Lot result and method |
| Loss on drying | ≤8.0% | Measured result and the activity basis |
| Microbiology | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Lot counts and absence statement |
| Carrier | Declared | Identity and food-grade status of the carrier |
The carrier is part of the regulatory object, not a packing detail. A lactose carrier brings an allergen declaration; a maltodextrin carrier brings a carbohydrate that may matter to the label. If a processing aid or a solvent is used, the file should say so and the residue statement should follow. Convert the lot result to the daily dose before comparing it with a finished-product limit; a compliant drum can still produce a non-compliant supplement at a high dose.
Claims and the activity figure
An activity figure is a measurement of the preparation, not a clinical effect. No disease-related claim follows from a catalase unit, and the enzyme should not be presented as preventing, alleviating or repairing a condition. In the EU, nutrition and health claims sit under Regulation (EC) No 1924/2006 and the authorised list in Regulation (EU) No 432/2012; the word “antioxidant” is a claim with conditions, and an enzyme activity is not automatically an authorised claim. In the US, structure or function statements for supplements are made with the required disclaimer and must not be disease claims. The finished product's claim review belongs to the brand and its regulatory reviewer.
The document set
| Document | What it answers |
|---|---|
| Specification, versioned | The activity definition, limits and form being bought |
| COA per lot | What the lot measured, by which method |
| Technical data sheet | Form, solubility, storage and handling |
| Safety data sheet | Hazards and safe handling |
| Allergen and GMO statements | The declarations the destination requires |
| Origin statement | Where the lot was manufactured |
| Carrier and processing-aid declaration | What else is in the powder |
| Activity method description | The unit definition and assay conditions |
A document list with version numbers is more useful than a folder of undated PDFs. When a statement is not available for the lot, name the gap before the order, not at the port.
Checklist before the first order
- Specification version, CAS 9001-05-2, EC 1.11.1.6 and the production organism are named.
- COA, TDS, SDS, allergen, GMO, origin and carrier declarations are on file.
- The activity unit definition travels with the specification.
- The contaminant results are converted to the finished-product dose.
- The route, the label and the claim have been reviewed for the destination.
- Source organism, carrier and pack are under change control.
The product page carries the catalog values; the catalase hub also links the technical pages. The COA page explains the lot certificate; the identity page covers the analytical evidence; the EU regulatory notes give the framework references; the quality page describes the release file.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation