06 Identity & adulteration

How we prove a lot is L-ornithine hydrochloride

Technical document 06 · Reviewed 2026-11-20 · L-Ornithine HCl

On this page
  1. The identity layers
  2. The chloride ratio: proving the salt
  3. X-ray diffraction and the solid form
  4. What substitution looks like
  5. What to write into the specification
  6. Five questions for the supplier

A lot is L-ornithine hydrochloride when five lines agree: the document names the salt and CAS 3184-13-2, IR and titration identify the amino acid, the specific rotation in 5 M hydrochloric acid fixes the L form, chloride sits near 21.0%, and the assay and loss on drying close the mass balance. The assay alone cannot separate the salt from the free base or a racemate.

In one line

Identity is a set of agreeing measurements: IR and titration name the salt, rotation fixes the L form, and chloride near 21% proves the counter-ion.

The identity layers

Paperwork is the weakest layer: printing the right CAS number costs nothing and says nothing about the drum. The table separates the five questions an identity file has to answer, and each needs its own measurement.

Five layers of L-ornithine hydrochloride identity
LayerQuestionTestWhat it proves
DocumentDoes the certificate name the salt?Name, CAS number, formulaThe label on the paper
SpectroscopyIs the skeleton ornithine?IR plus titrationThe amino acid and its acid–base behaviour
ConfigurationIs the natural enantiomer present?Specific rotation; chiral HPLC if disputedThe L form
Counter-ionWhich salt is it?Chloride by titration or ion chromatographyThe monohydrochloride
Mass balanceIs the powder diluted?Assay, loss on drying, related substancesWhether the figures agree

The chloride ratio: proving the salt

The monohydrochloride carries one chloride for each ornithine molecule. The theoretical figures are 35.45 ÷ 168.62 = 21.02% chloride and 132.16 ÷ 168.62 = 78.39% ornithine. A lot with chloride near 21.0% and an assay near 100% calculated as the salt fits that structure. Chloride near zero means the free base or a heavy dilution; a figure well above 21% means a more heavily hydrochlorinated salt, an added chloride or a blend.

Argentometric titration and ion chromatography both measure the counter-ion. The catalog does not include a chloride line, so the test is extra: use it for a disputed form, a new source, or a label that names the salt while the certificate stays vague. Solution pH supports the result, because the salt solution is acidic and a free-base solution is alkaline.

A blend is the case the ratio catches. Salt and free base can be mixed to sit inside the assay window, yet the chloride result falls below 21.0% in step with the free-base fraction. The assay counts ornithine; the chloride counts the counter-ion.

X-ray diffraction and the solid form

Diffraction asks how the solid is packed, not how much ornithine is present. It can tell a crystalline salt from an amorphous carrier and it can compare a lot with a reference pattern. The hydrochloride and the free base do not share a pattern, so a match carries some information about the form. It is not a purity assay and it cannot identify the counter-ion.

Before accepting a "match", ask for the reference pattern and the detection limit. A different polymorph leaves the label unchanged but may alter flow, dissolution or capsule fill; read that as a process question. Diffraction is not a routine release test here, and a certificate that says only "XRD conforms" without the pattern adds little.

What substitution looks like

Substitutions seen with L-ornithine hydrochloride and what they move
SubstituteWhat changesSignalTest
Free baseNo counter-ion; alkaline solution; more ornithine per gramChloride near zero; pH highChloride, pH, assay entity
D- or DL-ornithineThe L fraction fallsRotation low or near zeroPolarimetry, chiral HPLC
Another amino acidDifferent mass and retentionIR or titration differs; extra peakIR, HPLC, titration
DilutionAssay and chloride both fallThe two figures move down togetherAssay, chloride, mass balance
Extra hydrochlorideMore chloride per gramChloride above 21.0%Chloride, titration
MoistureWater rather than ornithineLoss on drying high; dried-basis assay normalLoss on drying

Shade is the weakest clue; the salt and the base are both white to off-white, and a diluted lot can match either. The rotation, the chloride figure and the mass balance carry the case.

What to write into the specification

  • "L-ornithine hydrochloride only; CAS 3184-13-2; C5H13ClN2O2."
  • "Assay by titration 99.0–101.0%, calculated as the salt, with the basis stated."
  • "IR and titration for identity; rotation +22.0° to +24.0° at c=2 in 5 M HCl."
  • "Chloride about 21.0% by titration or ion chromatography when the form is questioned."
  • "Loss on drying ≤0.5%; ≥95% through 80 mesh."
  • "No D-ornithine or other amino acid above the agreed limit."
  • "Metals, microbiology and destination market confirmed before the order."

Five questions for the supplier

  1. Which form is in this drum, and does the certificate carry CAS 3184-13-2?
  2. Is the assay expressed as the salt or as ornithine, and on which basis?
  3. Which solvent and concentration were used for the rotation?
  4. What chloride figure did the lot give, and by what method?
  5. Will you re-test the retained sample jointly if the result is contested?

Those five answers make a file; one assay percentage does not. The catalog sheet sits on the product hub; the COA page shows where each figure sits; the grades page compares forms; the salt-versus-base page follows the label consequence; the FTIR note explains the spectrum; the quality page describes release.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation