L-ornithine hydrochloride grades: the salt, the mesh and the fill
L-Ornithine hydrochloride is the salt form of the amino acid: one equivalent of hydrochloride per ornithine molecule, CAS 3184-13-2, 168.62 g/mol, and a white to off-white powder. The catalog grade is 99.0–101.0% by titration and at least 95% through 80 mesh; a granulated version is available on request. The grade decision is therefore two decisions: which form, and which particle size.
The grade is two decisions, the hydrochloride rather than the free base and an 80 mesh powder or a granulation, and neither is a quality ranking.
Why the hydrochloride is the commercial form
The free base is alkaline and takes carbon dioxide from the air; the hydrochloride is the crystalline salt made by adding hydrochloric acid to the base and crystallising. The salt has a defined counter-ion, a much less alkaline solution and a form that handles well as a dry powder. Those are the reasons most capsules and blends are built on the salt rather than on the base.
The salt is not a free upgrade. One hydrochloride adds 36.46 g/mol, so a gram of powder carries about 784 mg of ornithine and about 210 mg of chloride. The formula has to accept that mass and that chloride, and the label has to name the salt. The free base remains the right choice when the formula wants the alkalinity or when the chloride is not wanted.
The second decision is physical. The catalog grade is an 80 mesh powder: at least 95% passes an 80 mesh sieve. That is finer than the 40 mesh free-base grade, which helps content uniformity in a capsule but makes dust and caking more visible in the filling room. A granulated grade is quoted on request and has its own particle-size line.
The hydrochloride against the free base
| Line | Hydrochloride | Free base |
|---|---|---|
| Label name | L-ornithine hydrochloride | L-ornithine |
| CAS number | 3184-13-2 | 70-26-8 |
| Formula and molecular weight | C5H13ClN2O2 · 168.62 | C5H12N2O2 · 132.16 |
| Ornithine per gram | About 784 mg | 1,000 mg |
| Chloride | About 210 mg/g | None from a counter-ion |
| Solution pH | Acidic; the catalog states no number | 9.0–11.0 at 1% |
| Catalog assay | 99.0–101.0% by titration, as the salt | 98.5–101.5% by HPLC |
| Catalog mesh | ≥95% through 80 mesh | ≥95% through 40 mesh |
The pH row is qualitative for the salt on purpose. The catalog does not print a pH window for the hydrochloride, so the buyer who needs one should agree a value and a concentration in the specification rather than copy the free-base window across. The salt-versus-base page takes the chloride, the pH and the label further.
Mesh, flow and the chloride surface
An 80 mesh powder is fine enough to disperse quickly and to mix evenly into a capsule fill, and fine enough to hang in the air when a scoop is poured. In a filling room that means dust extraction, a closed transfer and a settling time before the area is cleaned. The same fineness makes the powder prone to caking once moisture reaches it, because the particles have more surface per gram.
A granulation is the usual answer when flow is the problem. It builds larger particles with a binder, which reduces dust and segregation, but it adds a water step and a binder to the specification. The granulated grade does not automatically inherit the powder's stability data or its mesh line; ask for both, and keep the chemical form and the physical form as two separate lines on the purchase order.
The chloride load has a handling consequence. In a dry room the powder is a normal solid; when moisture is present, chloride solutions attack mild steel. Contact parts, scoops and storage containers should be specified for chloride service, and a spill should be cleaned rather than left damp on a mild-steel surface.
Dosage forms and the fill weight
A capsule or tablet takes the 80 mesh powder directly. The fill weight is set by the label: 500 mg of the salt delivers about 392 mg of ornithine, and 500 mg of ornithine needs about 638 mg of the salt. A tablet adds granulation and compression to the question, so the granulated grade may be the better physical match even though the chemistry is unchanged.
A powder blend or stick pack takes the salt because it dissolves freely, but the blend has to be checked for the acidic pH it creates and for segregation between a fine amino acid and a coarser carrier. A liquid is the most demanding format: the salt is soluble, yet the solution is acidic and an unpreserved aqueous system is a microbial risk, and the chloride raises the corrosion question on the plant side. The dosage form should be chosen with the pH and the chloride in view, not only with the assay.
What to write into the specification
- "L-ornithine hydrochloride, CAS 3184-13-2, C5H13ClN2O2; the free base is a separate purchase."
- "Assay 99.0–101.0% by titration, calculated as the hydrochloride, with the basis stated."
- "Identification by IR and titration; specific rotation +22.0° to +24.0° at c=2 in 5 M HCl."
- "Loss on drying ≤0.5%; chloride about 21.0% where the counter-ion is to be confirmed."
- "Particle size ≥95% through 80 mesh, or the granulation agreed in writing."
- "Heavy metals and microbiology as listed; lot code on the pack, certificate and retained sample."
When the free base is the better choice
Choose the free base when the label names L-ornithine, when the formula needs the higher ornithine per gram, or when the chloride is not acceptable in the matrix. Choose the hydrochloride when the formula wants a less alkaline powder, when the label names the salt, or when the chloride is already part of the product. Neither choice is a potency ranking; the two materials differ in mass, pH and label name.
Do not switch forms to fix a flow problem. Mesh and granulation are the tools for flow; a form change rewrites the assay, the fill weight and the panel. The catalog sheet for the salt is on the product hub; the free-base sheet is on the L-ornithine page; the COA page shows how the salt is reported; the stability page covers moisture and the pack; the particle-size note explains the mesh figure.
In this document
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation