04 MOQ & ordering

L-Ornithine HCl: MOQ, packaging and ordering

Technical document 04 · Reviewed 2026-11-20 · L-Ornithine HCl

On this page
  1. Why the minimum is 1 kg
  2. Packs and formats
  3. Lead time and dispatch
  4. What a quotation needs
  5. A sample needs a lot code
  6. Terms to settle before the first order

L-Ornithine hydrochloride is supplied from 1 kg: the foil pouch is the smallest pack and the 25 kg fiber drum is the bulk unit. Standard dispatch is 1–7 days from confirmation. A quotation can only be firm once it names the salt and CAS number, the assay entity, the pack, the destination, the document set and the market.

In one line

A kilogram is the practical minimum: it is enough for a trial, a retained sample and an independent chloride check, and it still ships as one parcel.

Why the minimum is 1 kg

One kilogram is a working quantity, not a token sample. It covers a bench trial, a retained portion and an outside test for the salt form, and it travels as a single parcel. The two tests most often sent out are the rotation and the chloride check, and both need enough powder to be representative.

Repacking below that size splits a lot from its original pack record. The chemistry does not change, but traceability does. At the other end, a 25 kg drum cuts handling per kilogram while tying up inventory for longer; the minimum is set by the pack, not by a volume incentive. A kilogram also leaves room for a referee sample if a result is challenged, which a 100 g split may not.

Packs and formats

Standard L-ornithine hydrochloride packs
PackNet weightUseWhat to note
Foil pouch1 kgTrial or small batchHeat-sealed moisture barrier
Fiber drum25 kgProductionInner liner protects the powder
Granulated powderOn requestFlow and dust controlNew mesh and stability file
Custom meshOn requestMatch an existing fillSieve line changes

The catalog powder passes 80 mesh at 95% or better. A granulation or another mesh is a specification change: the quotation, the certificate and the stability summary all have to carry the new line.

Both packs are moisture barriers, not moisture-proof guarantees. The pouch depends on its seal and the drum on its liner, so a cut liner or a folded-over pouch is an opening.

Lead time and dispatch

Standard dispatch is 1–7 days after confirmation. The clock covers picking, documents and handover to the carrier; transit, customs and the buyer's own release sit outside it. A custom mesh or a granulation needs extra time, stated separately.

Ask for a dispatch date, not just a range. The pouch goes as a parcel and the drum as a pallet; the Incoterm fixes who books and who clears. Lot papers should be in the same shipment as the powder. A pre-shipment sample can be drawn from the lot before dispatch; ask for the draw date and the lot code together.

What a quotation needs

Six details turn an enquiry into a quotation that can be compared:

  1. The salt. L-ornithine hydrochloride, CAS 3184-13-2.
  2. The specification. Assay entity and basis, rotation conditions, loss on drying, mesh, metals and micro.
  3. The pack. Pouch, drum, granulation or custom mesh.
  4. The destination and Incoterm. Country, port or address, trade term.
  5. The document set. COA, specification, SDS and any market statement the importer needs.
  6. The use and market. Supplement, food or another use, and where it will be sold.

Missing either the destination or the assay entity leaves the offer ambiguous. The powder may be right for one label and wrong for another, and the document set is part of what is being bought. Prices and terms are on the quotation.

A sample needs a lot code

The 1 kg pouch is the qualification lot. Run assay, rotation, loss on drying, chloride and micro before scaling, and retain a portion from that same pack. Sample, COA and quotation should carry one lot code; without it the sample is only a demonstration.

Anything smaller is a repack from a bulk lot. It gets its own handling record and cannot stand in for the catalog pouch. Record the split in the batch file and keep that code beside the trial results.

Terms to settle before the first order

The quotation and the quality agreement should travel together: Incoterm, pack, dispatch, specification revision, lot COA, retained sample, retest period and change route. Agree them before the first production order.

If a lot fails the specification, the retained sample and a joint test against the named method settle it; a photograph of the drum does not. Name the referee laboratory and who pays before a dispute, not during one. Any change to the source, mesh or granulation should trigger a new specification revision and a fresh COA, not a note on the old one.

The catalog sheet is on the product hub; the release tests are on the COA page; the market file is on the compliance page; the MOQ glossary entry defines the term; the quality page describes release.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation