04 MOQ & ordering

L-Carnitine: MOQ, packaging and ordering

Technical document 04 · Reviewed 2026-11-18 · L-Carnitine

On this page
  1. Why the minimum is one kilogram
  2. The packs, and what each one protects
  3. Lead time
  4. What the quotation needs
  5. Samples
  6. Where the terms stop

An L-carnitine order starts at 1 kg, in a sealed foil pouch, and the standard production pack is a 25 kg fiber drum. The catalog lead time is 1–7 days from the point where the specification and the order are both confirmed. Everything else in the quotation follows from the form, the mesh, the pack and the destination, and those four lines are what a supplier needs before a number can be given.

In one line

One kilogram from a released lot, with that lot's certificate, is the minimum; the rest of the order is pack, mesh and destination.

Why the minimum is one kilogram

One kilogram is the smallest unit that still carries a lot identity. It is enough for a bench trial, enough for a second trial after the formula changes, and enough to keep a retained sample for the life of the project. Below that the material stops being a lot and becomes a hand sample, and a hand sample cannot support a release decision, a label claim or a comparison between two suppliers.

The minimum is a packing unit, not a volume tier. A buyer who needs 500 g should ask for a sample rather than a split pouch, because a split pouch loses the sealed seam and the lot label that make the material traceable. A buyer who needs 30 kg should ask for the drum plus pouches, because the drum is a different pack with a different liner and a different freight profile.

The packs, and what each one protects

Standard packs · L-carnitine base
PackNet weightConstructionTypical useWatch
Foil pouch1 kgFoil laminate, sealed seamsBench trial, small batch, retained sampleThe seal is the barrier; a folded top is not
Fiber drum25 kgFiber drum with sealed inner linerProduction batchThe liner, not the drum wall, keeps the water out

For a hygroscopic base the pack is part of the specification. A pouch that has been opened and folded closed is not sealed, and a drum opened for a partial weigh-out is no longer a controlled environment unless the liner is closed again. The label should carry the product name, the form, the lot number, the net weight and the pack date, and the lot number should be the same string that appears on the certificate.

A desiccant supports the liner where the destination climate or the storage time calls for one, but it is not a substitute for a sealed liner. If one is required, it belongs in the specification rather than in an assumption.

Lead time

The 1–7 day window is measured from two confirmations: the specification and the order. A quotation is not a confirmation, and an order placed against a different specification is a new order with a new clock. If the material is held in stock in the standard pack, the window is short; if the grade has to be milled to 80 mesh or granulated, the window starts when that step is scheduled, not when the enquiry arrived.

Documents run on a parallel clock. A shipment into a market that wants a certificate of origin, a safety data sheet in a local format or a third-party certificate will not move on the commercial documents alone, so the document list should be agreed before the order is confirmed. A destination with a public holiday in the same week is a destination with a longer window in practice.

What the quotation needs

Six lines are enough to quote and enough to compare two quotations. A quotation that names only “L-carnitine 99%” and a quantity is not comparable with one that names a form, a basis and a pack, because the two may describe different drums.

  1. The form and the mesh: base, tartrate or acetyl, and whether the powder is the standard 40 mesh, milled to 80 mesh or granulated.
  2. The specification: assay basis and method, specific rotation, loss on drying, the contaminant panel and the particle size, with the version that will be released against.
  3. The quantity and the pack: the number of 1 kg pouches, 25 kg drums, or both, and whether a desiccant is required.
  4. The destination and the delivery term, so that freight and documents are quoted on the same basis.
  5. The documents: certificate of analysis, specification, safety data sheet, origin and allergen statements, and the novel food or dietary ingredient statement for the market.
  6. Any additional test or sample: a third-party rotation, a chiral check, or a sample drawn from the lot for the buyer's laboratory.

Samples

A sample should come from the lot that will be offered, not from a separate sample stock. Ask for the lot number on the sample bag and on the certificate, and confirm that the sample was drawn before the pack was sealed rather than scooped from an opened drum. The quantity should cover the trial plus a retained portion, because the buyer's laboratory will need both and a second request costs a week.

A sample is also the moment to test what a certificate cannot show: how the powder flows, how quickly it dissolves, whether it cakes after a week on the bench, and whether the colour matches the previous lot. Those observations take a week and prevent a rejected drum. For a hygroscopic base, leave a portion in an open dish overnight and look at it in the morning; it is the quickest test a buyer can run.

Where the terms stop

Commercial terms belong in the quotation: this page describes the minimum, the packs and the lead time, and the quotation carries the rest. The minimum applies per form and per pack, so a mixed order is quoted line by line. The lead time is a commitment from confirmation, not from enquiry, and it assumes the specification that was quoted.

Three boundaries are worth writing into the purchase order. The specification is the release document, so a change to the mesh, the water limit or the form is a new specification and a new quotation. The certificate travels with the lot, so the lot number on the certificate, the pack and the invoice should match. And a form claim is only a claim if it is documented: if the label says L-carnitine base, the order should require the base, not a salt that carries the same carnitine figure.

The packs and the water question are followed through on the stability page, the release tests on the COA page, and the market requirements on the compliance page. The three forms are compared on the grade page, the product page carries the specification, and MOQ and lead time are defined in the glossary.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation