Amino Acids · Core range

L-Carnitine

C₇H₁₅NO₃ · CAS 541-15-1 · L-carnitine base, crystalline

L-carnitine base specified at 98.0–102.0% on the anhydrous basis, for capsules, tablets and powder blends where the salt form and the water content decide the fill.

Assay (anhydrous basis)
98.0–102.0%
Minimum order
1 kg
Indicative lead time
1–7 days
Standard packing
1 kg foil pouch25 kg fiber drum

Specification

What the certificate will report

Assay (anhydrous basis)98.0–102.0% (HPLC)
AppearanceWhite crystalline powder
IdentificationIR conforms
Specific rotation−29.0° to −32.0° (10% solution)
Loss on drying≤0.5%
Residue on ignition≤0.1%
Heavy metalsPb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg
MicrobiologyAPC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent
Particle size≥95% through 40 mesh
Chemical formulaC₇H₁₅NO₃
CAS541-15-1
Marker setL-carnitine (98.0–102.0%, anhydrous basis)
AppearanceWhite crystalline powder
SolubilityFreely soluble in water; the base is hygroscopic and picks up water in an open pack.

Primary method HPLC — the method behind each figure matters as much as the figure. How the COA is built →

What to confirm before ordering

  • Name the form: L-carnitine base, L-carnitine tartrate and acetyl-L-carnitine are different label ingredients with different masses.
  • Ask for the assay basis and the specific rotation; the rotation is the identity check that separates the L form from a racemate.
  • The base is hygroscopic; a sealed liner and a low-humidity dose room matter more than the headline assay.
  • Confirm the counter-ion and the free carnitine figure if the grade is a salt.

Buyer questions

Practical answers

What is L-Carnitine specified to?

Assay (anhydrous basis): 98.0–102.0% (HPLC). The full specification adds Appearance, Identification, Specific rotation, Loss on drying, Residue on ignition and the contaminant panel. Every figure on the batch COA is reported with the method used to produce it.

Which form of L-Carnitine is this?

The catalog grade is L-carnitine base, crystalline. Other salts, hydrates, carriers and particle sizes are separate specifications; the grade page compares the alternatives and explains what changes in the label, the assay and the fill weight.

Which dosage forms does this grade fit?

Capsules and tablets, Powder sticks and drink mixes, Sports and energy powders, Functional beverages. The grade is selected against the dosage form and the target dose: capsule fill and tablet flow depend on bulk density and particle size, while a stick pack or gummy depends on dissolution and taste.

Which documents are supplied with the batch?

A batch-specific COA, TDS, SDS, allergen and GMO statements, an origin record and a residual-solvent statement. Third-party heavy-metal or microbiological reports can be arranged, and the specification comparison is issued before the first order.

What is the minimum order and lead time?

1 kg minimum, packed in a 1 kg foil pouch from a released lot; 25 kg fiber drums are available as quantities scale. 1–7 days after specification and order confirmation. Samples are typically 100–500 g and carry the COA of the lot they were drawn from.

Documentation

Released with every lot

  • Batch-specific certificate of analysis against the agreed specification
  • Technical data sheet with form, CAS or species, carrier, storage and packing
  • Safety data sheet in the 16-section format
  • Allergen, GMO and origin statements signed for the batch
  • Residual-solvent statement for the crystallisation system
  • Specification comparison against the specification you sent

What this page does not claim

L-Carnitine is sold as an ingredient powder. No therapeutic or disease claim is made here, and no finished dosage form is offered. In the EU, claims for the nutrient or ingredient are restricted to the authorised list; in the US, structure/function statements are the responsibility of the brand that makes them and require substantiation. We publish specification, method, form and documents — that is the boundary of what we write.

Next step

Send the spec. We will confirm the form.

A competitor COA, a label claim or a target dose is enough to start. We reply with the grade we can release, the documents behind it and the questions we still need answered.