MK-4 oil is oxygen- and light-sensitive; the bottle sets the shelf life
Vitamin K2 MK-4 in a 1% oil degrades by oxidation, and a lot can fail on peroxide value while the assay still reads inside 1.0–1.1%. The menaquinone and the carrier oil both react with oxygen, and the first measurable sign is a rising peroxide value; light and heat accelerate the reaction, and the headspace in the bottle is the oxygen reservoir. The catalog limits are assay 1.0–1.1% and peroxide value ≤10.0 meq O₂/kg, and the shelf life comes from stability work on the exact pack.
An MK-4 oil can fail by oxidation before the assay moves, so the bottle, the headspace and the storage temperature set the shelf life more than the molecule does.
The bottle: oxygen, light and moisture
The standard pack is an amber bottle, and the amber glass is a light barrier rather than a seal. The closure is the seal, and the headspace above the oil is the oxygen that reacts first. A bottle with a large headspace, or one opened and closed several times in a dispensary, gives the oil fresh oxygen at every turn.
Moisture matters less for the oil itself, which is hydrophobic, and more for what the oil meets. An emulsion, a water-containing carrier or a softgel shell brings water into contact with the fat, and hydrolysis raises the free fatty acid. A cold bottle should reach room temperature before it is opened, so that water does not condense on the surface or inside the closure.
Heat is the third variable, and it acts on both reactions. A bottle left in a warm loading bay, a car or a greenhouse oxidises faster than one held in a cool store. The pack should stay closed, upright and dark between uses, and the in-use period should be short enough that the last portion is still inside the specification.
The oil is already a solution
In the 1% oil, menaquinone-4 is dissolved in a triglyceride carrier. There is no crystal to protect and no particle surface to coat; the molecule is in contact with the carrier and with dissolved oxygen throughout the liquid. That is convenient for filling and less convenient for stability, because every part of the oil is exposed at once.
The dilution does not stabilise the menaquinone. It adds a second oxidisable material: about 99% of the bottle is carrier, and the carrier's own unsaturation decides how quickly hydroperoxides form. A polyunsaturated soybean oil and a more saturated medium-chain triglyceride behave differently in the same bottle, so the carrier belongs in the stability discussion, not only in the ingredient list.
An antioxidant such as tocopherol can be added to slow the reaction, and it must be declared as an ingredient. It delays the rise in peroxide value; it does not stop it, and it does not repair an oil that was already oxidised when it was filled. The antioxidant, its level and its label position are part of the specification.
What ages the oil
| Pressure | Effect | Countermeasure |
|---|---|---|
| Oxygen | Forms hydroperoxides; peroxide value rises | Sealed bottle; small headspace; modified atmosphere where agreed |
| Light | Bleaches the colour; drives the assay down | Amber bottle; dark store; closed carton |
| Heat | Accelerates oxidation and hydrolysis | Cool store; controlled process temperature |
| Carrier unsaturation | More double bonds oxidise faster | Carrier specification; antioxidant |
| Metal ions | Catalyse hydroperoxide breakdown | Avoid iron and copper contact; check pumps and lines |
| Water in an emulsion | Hydrolysis; free fatty acid rises | Dry carrier; emulsion and pH control |
These pressures combine. A warm, bright bottle with a large headspace can age faster than three separate stresses would suggest, and an emulsion adds water and an interface to the list. The question is not whether MK-4 is stable in the abstract, but how long this oil stays inside its specification in this pack at this condition.
Designing the stability run
A workable design names the pack, the storage condition, the sampling points and the tests. For warehouse conditions, 25 °C/60% relative humidity is the long-term arm and 30 °C/65% the intermediate one; 40 °C/75% is the accelerated arm that stresses the pack. Add a light-exposure arm, because a dark incubator cannot show a photostability failure.
Test assay, peroxide value, p-anisidine value, free fatty acid, appearance and microbiology at each point. Peroxide value alone can be misleading, because hydroperoxides break down into aldehydes as the oil ages and the peroxide figure can fall while the oil is getting worse. The anisidine value catches that second stage, and the pair reads better than either number alone.
Each report should list the individual results rather than a pass statement, and name the pack and the lot family. A bottle and a softgel are different packs with different headspace, different oxygen transmission and different opening histories, so data from one does not answer for the other.
The matrix adds its own risks
A softgel carries the oil inside a shell that limits oxygen and light, and the shell's own ingredients and thickness are part of the barrier. The fill mass, the overage and the shell all belong in the stability file. A two-piece capsule is a weaker pack for an oil: the join can leak, and the oil can migrate into the shell, so an oil is usually filled into a sealed softgel rather than a hard capsule.
An emulsion or a drink brings water, pH, homogenisation and a heat load. Bulk oil data is where the work starts, not where it ends. The formulator sets any overage; that choice belongs with the label and the stability results, and it cannot rescue a pack that admits oxygen.
Assigning a retest period
No single shelf-life figure covers every MK-4 oil pack, because the pack and the storage condition decide it. The retest period is written into the specification and backed by stability data for that pack. A shelf-life figure with no pack, no storage condition and no test panel behind it is an assertion rather than a fact.
An unopened amber bottle and one opened weekly are different storage cases, and a softgel in a blister is a third. When the retest period ends, re-assay the retained sample before extending the period; a bulk figure should not be assumed for a repacked container.
Pack options are on the product hub. Release tests are on the COA page; ordering quantities on the MOQ page; the assay on the HPLC note; release on the quality page.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation