Vitamin K2 MK-4 oil: MOQ, packaging and ordering
Vitamin K2 MK-4 1% oil starts at 1 kg in an amber bottle, with a 5 kg amber bottle as the bulk pack. The standard pack ships in 1–7 days. One kilogram carries about 10 g of menaquinone-4, which is a very large number of microgram servings, so the minimum is set by lot identity and sampling rather than by dose volume.
One kilogram of 1% oil carries about 10 g of menaquinone-4, so the minimum is set by lot identity and sampling, not by the dose.
What sets the 1 kg minimum
At 1.0–1.1% the kilogram holds 10–11 g of menaquinone-4. At a 45 µg serving that is more than 200,000 servings; at 5 mg it is about 2,000. The bottle is not a dose pack and is not sized to a production run. It is the smallest unit that can be filled, labelled, certified and sampled as a lot.
Under a kilogram, the oil is usually drawn from a bigger lot and repacked. The extra handling breaks the tie between certificate and bottle and loses the original pack identity, while the oil itself is unchanged. The 5 kg bottle cuts handling per kilogram, yet it ties up stock for longer; oil in storage gains peroxide value, so the bigger pack is not automatically the easier one to use up.
Packs and what the bottle does
| Container | Fill | Where it fits | Handling |
|---|---|---|---|
| Amber bottle | 1 kg | Trial, qualification, small batch | Light barrier; headspace above the oil; reseal after opening |
| Amber bottle | 5 kg | Production runs | Same barrier; plan the in-use period before opening |
The amber glass is a light barrier, and the closure is the seal. The oil is not protected by a foil layer the way a powder is, so the headspace and the number of openings matter. Keep the bottle upright and closed, store it dark and cool, and use the contents within the agreed in-use period. A different pack can be quoted, but it is a different specification item with its own stability evidence.
Dispatch and transit
The standard pack leaves in 1–7 days after the order is confirmed. That covers picking, paperwork and dispatch; transit, customs and the customer's own release sit outside it. A non-standard pack or a different carrier takes longer, and the quotation should say so.
Get the dispatch date in writing, not only the range. The 1 kg bottle travels as a parcel and the 5 kg bottle as a pallet; the Incoterm fixes who books the freight and who handles clearance. Send the COA and the other lot papers with the shipment, not after it. Heat is the transit hazard for an oil: a bottle left on a hot dock or in a closed van can arrive with a higher peroxide value than it left with.
What a firm quotation contains
Six details turn a quotation into something comparable:
- The material. Vitamin K2 MK-4 1% oil, CAS 863-61-6, with the carrier written out.
- The specification. Concentration and method, peroxide value, metals and micro.
- Volume and container. A 1 kg or 5 kg amber bottle, or a pack quoted on its own.
- Where it goes. Country, address or port, and the trade term.
- The paperwork. COA, specification, TDS, SDS and any statement the importer's market asks for.
- The end use. Softgel, oil blend or another application, and the country of sale.
A quote that omits the carrier and the market cannot be checked. One concentration may be acceptable in one country and outside the file in another, and the carrier statement is part of what is being sold. Terms belong on the quotation, not here.
A sample that carries its lot code
The first 1 kg bottle is the lot you qualify. Mix the oil before drawing a sample, because the surface in contact with the headspace can oxidise ahead of the bulk, and take the sample after mixing rather than from the top. Test assay, peroxide value, p-anisidine value, free fatty acid and microbiology, and ask for the fatty-acid profile if the carrier identity matters. Keep part of the same bottle as the retained sample.
The lot code must be the same on the sample, the COA and the quotation. Without that link the sample is only a demonstration. A trial needing less than a kilogram is drawn from a bulk lot, carries its own handling record and is not the 1 kg amber bottle.
Points to agree before ordering
Put the commercial and quality points in one place: Incoterm, pack size, dispatch window, specification revision, a retained sample, a COA for every lot, the retest period and how a carrier or source change is handled. Agree them before the first production order, when the discussion is still easy.
Oil changes after it leaves the plant, so agree how peroxide value is treated on arrival. Name the method, the referee laboratory both sides accept and who carries the cost of a re-test. A lot outside the limit is settled on the retained sample with a joint test, not on a photograph of the bottle. A return argued from colour alone is difficult to sustain.
The product hub lists the catalog limits; release tests are on the COA page; market files are on the compliance page; the MOQ glossary defines the term; shipping and documents are on the logistics page.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation