02 Grade comparison

MK-4 oil, crystalline powder or dilution: choosing a grade

Technical document 02 · Reviewed 2026-11-20 · Vitamin K2 MK-4 Oil

On this page
  1. Why the same molecule comes as an oil and a powder
  2. The oil, the powder and a powder on carrier
  3. What each grade is like to handle
  4. From a label dose to a weighable mass
  5. Lines to fix in the specification
  6. Where a grade stops working

Vitamin K2 MK-4 is supplied as a 1% oil in a carrier, as a 98.0–102.0% crystalline powder, and on request as a powder diluted on a carrier. The catalog oil is 1.0–1.1% menaquinone-4 by HPLC; the powder is the isolated substance. The grade decides the mass that carries the label dose, the ingredient list and the stability file, so it is chosen before the purchase order.

In one line

The grade is chosen from the dose: a microgram claim needs the 1% oil to be weighable, and a 45 mg claim needs the 98% powder to fit a capsule.

Why the same molecule comes as an oil and a powder

Menaquinone-4 is a low-melting solid, reported around 35–38 °C. The isolated material softens in a warm room, and at a small weight it is hard to disperse evenly through a blend. Dissolving it in a food-grade oil at 1% gives a liquid that can be pumped, weighed and filled without melting or milling, and that mixes evenly into a softgel fill.

The powder exists for the opposite reason: at a milligram dose, a concentrated solid keeps the fill small enough for a capsule or a tablet, and the carrier does not take up room in the formula. An order that says only “MK-4” leaves the form open, so the concentration and the carrier have to be written into it.

The oil, the powder and a powder on carrier

Three MK-4 grades and where each fits
Property1% oilCrystalline powderPowder on carrier
MK-4 content1.0–1.1% (10–11 mg/g)98.0–102.0%Agreed and declared
CarrierA declared food-grade oilNoneA declared solid carrier
AppearanceYellow to amber, clear oilYellow crystalline powderPowder; colour follows the carrier
Dose fitMicrograms to about 10 mgAbout 1 mg and aboveMicrograms to about 1 mg
Usual dosage formSoftgel, drops, oily blendCapsule, tablet, oil blendDry blend, stick, capsule
Label additionThe carrier oil is namedNo carrier to nameThe carrier is named

The mass does not transfer between them. Rebuilding a 98% powder formula around the 1% oil makes the fill about a hundredfold heavier, which changes the capsule, the label and the stability file together. The powder on carrier is a third product with its own carrier and blend-uniformity test, not a packing option on the powder.

What each grade is like to handle

The oil is a clear yellow to amber liquid, insoluble in water and miscible with fats and oils. It is light-sensitive, and its handling marker is oxidation rather than moisture: the carrier and the menaquinone both react with oxygen, so the peroxide value is measured at release and watched during storage.

The powder is a yellow crystalline solid, practically insoluble in water and soluble in fats and organic solvents. Its catalog limits include loss on drying ≤0.5% and ≥95% through 40 mesh, which describe a dry, milled solid rather than an oil. The low melting range makes it heat-sensitive in a loading bay, and light-sensitive in a clear container.

Neither grade is protected by its format. The oil keeps the molecule in solution, fully exposed to the oxygen dissolved in the carrier; the powder keeps it as a solid with a small surface area but picks up moisture when the pack is open.

From a label dose to a weighable mass

A label dose counts menaquinone-4, not the oil or the powder that carries it. Divide the dose by the concentration to get the material weight. At 1% the divisor is small, so the weight is large; at 98% the weight is close to the dose itself.

One dose converted to 1% oil and to 98% powder
Label dose1% oil98% powderWhat the number means
45 µg4.1–4.5 mg0.098–0.102 mgThe oil is weighable; the powder weight is not
1 mg90.9–100 mg0.98–1.02 mgBoth work; the oil is a small fill
5 mg455–500 mg4.9–5.1 mgA softgel for the oil, a small capsule for the powder
10 mg0.91–1.0 g9.8–10.2 mgThe oil needs a large softgel
45 mg4.1–4.5 g44.1–45.9 mgThe oil fill no longer fits a standard capsule

The two grades meet in the region of about 1–10 mg per serving. Below it, the powder weigh becomes too small to control and the oil is the practical choice; above it, the oil mass becomes the constraint and the powder is. The figures are the stoichiometric minimum, before overage and the rest of the fill.

Dosage form can override the arithmetic. A softgel needs a liquid fill, so the oil is the natural starting point even where the powder would weigh comfortably. A two-piece capsule or a tablet needs a solid, so the powder is the natural starting point even at a low dose, provided the weigh can be controlled or the powder is pre-diluted.

Lines to fix in the specification

  • “Menaquinone-4 (MK-4), CAS 863-61-6, C31H40O2, 1.0–1.1% w/w in a declared food-grade oil.”
  • “Assay by HPLC with UV detection; identification by retention time and UV spectrum.”
  • “Peroxide value ≤10.0 meq O₂/kg; acid value and p-anisidine value can be agreed.”
  • “Carrier identity by fatty-acid profile, with the carrier source and allergen statement.”
  • “Heavy metals and microbiology as listed; packed in amber bottles.”
  • “Grade named as the 1% oil, the crystalline powder or the powder on carrier, with the concentration.”

For the oil, the carrier, the concentration and the peroxide value are the three lines that must not be left to a data sheet. For the powder, the menadione limit and the melting range can be agreed as additional lines. The format written on the purchase order should be the one the specification describes, not just the product name.

Where a grade stops working

The oil is wrong when the claim is 45 mg, because the fill becomes grams; when the formula is a dry blend, because the oil wets and clumps it; or when the label cannot name the carrier for the destination. The powder is wrong when the claim is 45 µg, because the weigh is below production control; when the fill must be liquid, because a powder does not fill a softgel; or when the powder's dust and static disrupt the line.

None of these is a supplier swap. A move between formats calls for a fresh specification, a new fill weight, a label review and stability work on the new matrix. The product hub lists the catalog range; the oil and powder comparison takes the carrier and label questions further; the MK-4 powder page gives the other grade; the MOQ page covers the ordering unit.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation