What the COA for vitamin D3 actually contains
The certificate for a vitamin D3 lot reports appearance, identification by HPLC retention time, vitamin D3 content in IU/g, the carrier, loss on drying, particle size, the heavy-metal panel and microbiology. Each line should name the method, the release limit and the result measured on that lot. The figures on this page are the catalog specification for the 100,000 IU/g spray-dried powder; the batch COA is the document that confirms a particular pouch or drum.
100,000 IU/g is both an assay result and a formulation statement; the certificate has to show the IU figure, the carrier and the method behind it.
The certificate as a test report
A certificate is auditable when every row answers three questions: what was measured, how, and against which limit the lot was released. For a spray-dried powder the sheet also has to describe the matrix, because the vitamin is a small part of the powder and the carrier is the rest of it.
| Parameter | Method | Release limit |
|---|---|---|
| Appearance | Visual | White to cream, free-flowing, water-dispersible powder |
| Identification | HPLC retention time | Conforms to the cholecalciferol reference standard |
| Vitamin D3 | HPLC, UV detection | ≥100,000 IU/g |
| Vitamin D3, mass basis | Calculated from the HPLC result | 2,500 µg/g (2.5 mg/g) |
| Carrier | Declaration and composition | Starch, gum arabic or maltodextrin, named on the certificate |
| Loss on drying | Gravimetric | ≤5.0% |
| Particle size | Sieve analysis | ≥95% through 40 mesh |
| Parameter | Method | Release limit |
|---|---|---|
| Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg |
| Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent |
What the IU figure measures
The assay reports cholecalciferol in the powder, and the certificate expresses that result in IU/g. The IU is not a mass unit: one microgram of cholecalciferol is defined as 40 IU, so the laboratory measures a mass by HPLC and the certificate converts it. The IU/g figure is a calculated expression of the HPLC result, not a second measurement.
The arithmetic is worth doing before the certificate is read. At 100,000 IU/g, one gram carries 100,000 ÷ 40 = 2,500 µg, which is 2.5 mg, or 0.25% of the powder by mass. The remaining 99.75% is carrier, moisture, any declared antioxidant and the minor solids of the spray-drying feed. Pure cholecalciferol would be 40,000,000 IU/g, so this grade is a dilution of roughly one part vitamin to four hundred parts matrix. That is why the IU figure describes a formulation as much as an assay.
The reporting basis has to be stated. Loss on drying is allowed up to 5.0%, and a result calculated on the dried basis is higher than the same material as sold, by the moisture fraction. Two suppliers' IU/g numbers are comparable only when the method, the reference standard and the basis are the same. The limit is a floor, not a target: a result above 100,000 IU/g is compliant, and how far above it sits is a stability and overage question.
Release limit versus batch result
The release limit is the acceptance boundary; the batch result is what the laboratory measured on that lot. Both belong on the sheet, in separate columns, with the method next to them. A result column filled with the specification range is a copy of the gate, not a result.
Not every line needs a numeric window. Carrier is a declaration: the certificate names the material and, on request, its proportion. Identification is a conformance statement against a reference standard. Vitamin D3, loss on drying, particle size, the heavy metals and the micro results are measured lines, and each should carry a unit and a limit. The lot code, the manufacturing and expiry dates and the pack size belong on the same sheet. “Passes specification” is a conclusion the reader should be able to reach from the numbers; ask for the chromatogram when the IU result sits close to the floor.
What moves between batches
The IU/g result moves with the ratio of vitamin premix to carrier in the spray-drying feed, with the losses in the dryer and with the analytical method. A feed that is slightly richer raises the result; a carrier lot with a different moisture content changes the as-sold figure.
The carrier is a source of variation in its own right. Starch, gum arabic and maltodextrin differ in flow, density, dispersion and hygroscopicity, and a switch from one to another changes the powder even when the IU/g stays inside the range. Colour is less quantitative and often more revealing: a cream or tan tint can point to heat exposure or oxidation while the assay still passes. A trend across lots, with the IU result drifting low and loss on drying climbing, says more than one result near an edge.
When to order an outside test
Order an independent test for a new source, a first shipment into a regulated market, a label claim that has to be defended, or a disputed result. The useful panel is an HPLC run with a cholecalciferol reference standard, a second standard for ergocalciferol to show that the method separates the two, a check that the IU calculation uses the 40 IU per microgram factor, ICP-MS for the heavy-metal panel and the micro suite.
Ask the laboratory to report the detection limit for ergocalciferol and to attach the chromatogram. A “not detected” line without a limit is evidence about the method's sensitivity, not about the sample. The report should also name the column, the mobile phase, the detection wavelength and the basis. Chain of custody matters: the sample tested should be the sample retained, and the lot code on the certificate, the pack and the sample should match.
What to compare between suppliers
Put seven lines side by side: the grade and IU/g; the assay method and the standard used; the equivalent in µg/g; the carrier and its proportion; loss on drying; particle size; and the contaminant and micro panels. Two quotations that match on IU/g but differ on the carrier, the basis or the method are not describing the same powder.
The second layer is traceability. The lot code should be identical on the certificate, the pouch or drum and the retained sample. The certificate should say who manufactured the lot and which carrier was used; a correct certificate can still belong to a pack other than the one on the loading dock. Ask for the specification version the lot was released against.
The catalog specification sits on the vitamin D3 product page. The grades are compared on the grade page; the tests that separate cholecalciferol from ergocalciferol are on the identity page; the ordering unit is on the MOQ page. The chromatographic method is described in the HPLC method note, the certificate terms in the COA glossary entry, and the release workflow on the quality page.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation