03 Stability

Vitamin D3 is light- and heat-sensitive; the carrier decides the rest

Technical document 03 · Reviewed 2026-11-18 · Vitamin D3

On this page
  1. The powder in the sealed pack
  2. Oil, emulsion and the gummy matrix
  3. What drives the loss
  4. A stability protocol that can be audited
  5. Formulation and process choices
  6. Assigning a shelf life

Cholecalciferol is degraded by light, heat and oxygen. In a spray-dried powder the molecule sits in a carrier that limits its mobility and its contact with air, and the pack keeps light and moisture out; those two layers, not the molecule alone, decide how much vitamin D3 survives storage. The certificate's loss on drying and the pack's barrier belong in the stability file beside the assay.

In one line

The molecule is sensitive; the powder survives because the carrier, the antioxidant and the pack take the exposure.

The powder in the sealed pack

A 100,000 IU/g spray-dried powder is a dispersion of cholecalciferol in a starch, gum arabic or maltodextrin matrix. The matrix lowers the mobility of the molecule and limits the oxygen that reaches it, which is why the dry powder in a sealed pack is the most forgiving form to store. The limits that matter are already on the certificate: loss on drying at or below 5.0%, a declared carrier, and a pack that stays closed.

The 1 kg foil pouch and the 25 kg fiber drum with a food-grade liner are the two standard packs. Both are opaque when closed, and both depend on the liner being intact. A drum left open in a warm room, or a pouch folded instead of sealed, exposes the powder to moisture and light and gives the matrix a chance to cake. Store the powder cool, dry and dark, and reseal the pack between uses.

Oil, emulsion and the gummy matrix

An oil removes the water but adds a new set of reactions. The carrier oil can oxidise, and its peroxides can attack the vitamin; light passes through many oils and through clear softgel shells. A softgel therefore needs an opaque shell, a controlled headspace and an oil with its own oxidative stability. The concentration and the carrier oil should both be on the specification, because the oil is part of the stability system.

In a beverage, the vitamin has to be dispersed in water even though it is fat-soluble. That means an emulsion or a fine dispersion, and the emulsion is usually the weaker part of the system: light in a clear bottle, dissolved oxygen, heat during pasteurisation and droplet coalescence can all shorten the shelf life before the cholecalciferol itself changes. In a gummy, the heat of cooking, the water activity and the cooling profile are the main variables. Adding the vitamin late in the process reduces its heat exposure but does not remove the need for a stability run in the finished matrix.

What drives the loss

Degradation routes for vitamin D3 and the controls that address them
FactorWhat it doesControl
LightIsomerises the triene system and fades the powderOpaque or amber pack, light-protective carton
HeatRaises isomerisation and oxidation during drying, blending or cookingLower process temperature, shorter residence time, cooling before packing
OxygenOxidises the side chain and consumes the antioxidantSealed pack, controlled headspace, declared antioxidant
MoisturePlasticises the matrix, causes caking and speeds the other routesLoss on drying ≤5.0%, sealed pack, dry storage
Trace metalsCatalyse oxidation at low concentrationSource control, heavy-metal panel on the certificate
AcidCan isomerise the vitamin in an acidic blend or beverageSeparate the vitamin from the acid phase, test the finished matrix

The table is not a ranking. In a sealed powder, light and heat usually dominate because moisture and oxygen are already controlled. In an oil or an emulsion, oxygen and light move to the front. The same molecule can fail by a different route in each dosage form, which is why a raw-material result cannot be transferred to a finished product.

A stability protocol that can be audited

A useful protocol names the pack, the storage condition, the time points, the method and the acceptance limits before the first sample goes into the chamber. A common design pairs a long-term condition, such as 25 °C and 60% relative humidity, with an accelerated condition, such as 40 °C and 75% relative humidity, and adds a photo-stability arm modelled on ICH Q1B and an open-pack arm. The light arm is not optional for a product sold in a clear bottle or a clear capsule.

At each point the laboratory should report vitamin D3 in IU/g or µg/g, loss on drying, appearance and the micro result, and for an oil or emulsion the relevant physical tests. The finished product should be tested in its own pack: a powder in a foil pouch and the same powder in a stick pack, a capsule or a gummy are different stability subjects even when the vitamin input is identical.

Formulation and process choices

The carrier is the first formulation decision. A starch matrix is less hygroscopic and gives a denser powder; a gum arabic matrix disperses more readily in water. Neither is a light barrier, so the pack still has to do that job. An antioxidant can be part of the carrier system, but it has to be declared and it does not replace an opaque pack; a light-exposed sample with an antioxidant will still isomerise.

Process exposure is cumulative. Spray-drying, blending, tableting and gummy cooking each add heat, and the total is what the molecule sees. Opaque capsule shells, an opaque film coating and a secondary carton are simple barriers that are easy to specify and easy to audit. Clear capsules and clear bottles are the opposite: they look clean on the shelf and give light free access to the molecule. Overage belongs to the finished-product specification, not to the raw-material certificate.

Assigning a shelf life

Shelf life is assigned per pack, per formulation and per market, and it is supported by the stability data for that combination. The raw material's retest date does not establish the finished product's shelf life, and a batch COA does not establish either. The storage statement on the label should match a condition that was actually tested; a label that says cool and dry needs data at that condition, not only an accelerated run.

Once a 1 kg pouch is opened, the remaining powder sees a different environment. Split the pack into smaller units for a long production campaign, reseal it properly, and keep it away from light. The retained sample should come from the same lot and be stored under the same condition as the batch it represents. When a certificate is requested at shipment, ask for the remaining shelf life as well as the release result.

The catalog specification is on the vitamin D3 product page. The grade choice is on the grade page; the certificate lines are on the COA page; the packaging and ordering unit are on the MOQ page. The analytical method is described in the HPLC method note, and the release workflow is on the quality page.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation