02 Grade comparison

100,000 IU/g, 400,000 IU/g or oil: choosing a vitamin D3 grade

Technical document 02 · Reviewed 2026-11-18 · Vitamin D3

On this page
  1. Why the grade is a weighing decision first
  2. Three forms, one molecule
  3. What the carrier does
  4. Converting a label dose into powder
  5. What the label can say about the grade
  6. What to write into the specification, and what changes on a switch

Vitamin D3 is supplied as a 100,000 IU/g spray-dried powder, as a 400,000 IU/g powder on request, or as an oil on request. All three carry cholecalciferol, but the concentration decides the mass that carries a dose, the carrier that appears on the label and the process the powder has to survive. Choose on the dose and the dosage form, not on the largest IU figure in the quotation.

In one line

The grade is chosen by the dose weight and the dosage form, not by the largest IU figure on the quotation.

Why the grade is a weighing decision first

A vitamin D dose is written in micrograms or IU, and a capsule fill, a tablet blend or a stick pack is weighed in milligrams. At 100,000 IU/g, a 1,000 IU dose is 10 mg of powder; at 400,000 IU/g it is 2.5 mg. A 400 IU dose is 4 mg of the 100,000 IU/g powder and 1 mg of the 400,000 IU/g powder. Both masses are weighable, but they behave differently on a line: 10 mg is a comfortable blend component, while 1 mg is a small addition that has to be distributed evenly through a much larger batch.

The grade therefore answers a physical question before it answers a commercial one: how much material has to move to carry the label dose, and can the line handle it uniformly? A more concentrated powder is not a better grade; it is a smaller weight of the same vitamin on less carrier.

Three forms, one molecule

Vitamin D3 grades, their concentration and where each fits
FormVitamin D3 per gramMatrixTypical fit
100,000 IU/g spray-dried powder2,500 µg (2.5 mg)Starch, gum arabic or maltodextrin, declaredCapsules, tablets, stick packs, drink mixes, gummies
400,000 IU/g spray-dried powder10,000 µg (10 mg)Declared carrier, thinner per IUHigh-dose capsules and tablets, small serving sizes
OilAgreed and declaredCarrier oilSoftgels, oil drops, oily systems

The 100,000 IU/g powder is the catalog standard. The 400,000 IU/g powder is the same vitamin at four times the concentration, which is useful when a capsule has to stay small or a serving has to stay light. The oil is a different physical system: it carries the vitamin in a fat instead of a water-dispersible matrix, so it suits a softgel or an oil but not a dry blend.

What the carrier does

The carrier is not empty space. It gives the powder its flow, its dispersion and its dilution factor, and it is named in the ingredient list. Starch usually gives a denser, less hygroscopic powder; gum arabic is chosen when the powder has to disperse in water; maltodextrin sits between them and is common in blends. At 100,000 IU/g the vitamin is 0.25% of the powder, so the carrier is almost the whole product. At 400,000 IU/g it is 1.0%, and the same mass of powder carries four times the vitamin.

The physical limits support the dosage form: at least 95% through 40 mesh so the powder blends without lumps, loss on drying at or below 5.0% so it does not cake, and a declared carrier so the label can name it. Change the carrier and the flow, the dispersion, the fill weight and the label change with it, even when the IU/g stays inside the range.

Converting a label dose into powder

The conversion has two steps. Divide the IU figure by 40 to get micrograms, then divide the IU figure by the grade's IU/g to get grams of powder. The table does both for the two powder grades, before overage and before the rest of the formula.

Label dose converted to micrograms and to powder mass
Label dose (IU)Cholecalciferol (µg)100,000 IU/g powder (mg)400,000 IU/g powder (mg)
4001041
8002082
1,00025102.5
2,00050205
4,0001004010

The table is the stoichiometric minimum. A capsule that also carries a mineral blend, a stick pack with 3 g of powder and a gummy with a 2 g base each have their own uniformity limit, and the grade has to be chosen with that limit in view. A 4,000 IU dose from the 100,000 IU/g powder is 40 mg, which is a normal capsule fill; from the 400,000 IU/g powder it is 10 mg, which is easier to fit but harder to distribute in a small batch.

What the label can say about the grade

The label declares the vitamin D amount and the form, not the powder concentration. In the EU the declaration is in micrograms against a nutrient reference value of 5 µg (200 IU), and the ingredient list names cholecalciferol and the carrier. In the US the Supplement Facts panel declares vitamin D in micrograms against a Daily Value of 20 µg (800 IU); the IU may be added in parentheses, and the source is named as cholecalciferol. A 100,000 IU/g powder does not become a 100,000 IU label claim; the panel reports the micrograms that the serving delivers.

This is where a grade change becomes a label change. Move from the 100,000 to the 400,000 IU/g powder and the fill weight falls, but the IU and µg on the panel stay the same because the dose is the same. Move from a powder to an oil and the ingredient list gains an oil, the dosage form may change, and the stability file has to be rebuilt for the new matrix.

What to write into the specification, and what changes on a switch

Write the concentration, the carrier and the physical limits together: “Cholecalciferol 100,000 IU/g spray-dried powder; carrier maltodextrin, declared; vitamin D3 ≥100,000 IU/g by HPLC; loss on drying ≤5.0%; ≥95% through 40 mesh.” For the 400,000 IU/g grade, change the IU figure and keep the rest. For an oil, replace them with the oil concentration, the carrier oil and the pack.

A grade switch changes five things: the mass weighed per dose, the blend uniformity challenge, the carrier named on the label, the stability data that supports the shelf life, and the ordering unit. The IU arithmetic does not change, and neither does the identity of the molecule. The purchase order should name the grade rather than “vitamin D3”.

The catalog ranges are on the vitamin D3 product page. The certificate lines are explained on the COA page; the light and heat limits on the stability page; the ordering unit on the MOQ page. The difference between D3 and D2 is set out on the D3 versus D2 page, and the assay is described in the HPLC method note.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation