05 Compliance

Where vitamin D3 is permitted, and what the file must show

Technical document 05 · Reviewed 2026-11-18 · Vitamin D3

On this page
  1. Four checks, three markets
  2. The EU route
  3. The US route
  4. The UK route
  5. The limits in the file
  6. Where the claim boundary sits
  7. The document set
  8. A short checklist

Cholecalciferol is a permitted vitamin D source for food supplements in the EU, the US and the UK. Permission is only the first check: the file also has to show that the lot meets the specification, that the label uses the permitted name and units, and that any claim on the pack is one the market allows. A compliant lot with a non-compliant label is still a non-compliant product.

In one line

Cholecalciferol is a permitted vitamin D source in the EU, the US and the UK; the file has to show that the form, the level, the label and the claim agree.

Four checks, three markets

A market file is four checks: is the form permitted, does the lot meet the level and the contaminant limits, does the label use the permitted name and units, and is the claim permitted? The three markets share the first answer and differ on the rest. This is a sourcing reference, not legal advice; the instruments can be amended, so check the current text.

The permission route in each market
MarketPermission routeMain instruments
EUVitamin D source on the food-supplement positive listDirective 2002/46/EC; Regulation (EU) No 1169/2011
USDietary ingredient sold under DSHEA21 CFR 111; 21 CFR 101.36
UKRetained permitted-forms list for food supplementsFood Supplements (England) Regulations 2003

The EU route

Directive 2002/46/EC lists the vitamins and the forms permitted in food supplements; Annex II, Part A names cholecalciferol and ergocalciferol. The route is the food-supplement list, not a novel-food entry. The carrier must be a permitted food ingredient or additive at the level used, and it is declared on the label.

Regulation (EU) No 1169/2011 sets the label: vitamin D is declared in micrograms per portion and as a percentage of the nutrient reference value, 5 µg (200 IU), with the supplement particulars and the daily-dose warning. Contaminants are governed by Regulation (EU) 2023/915: lead 3.0 mg/kg, cadmium 1.0 mg/kg and mercury 0.10 mg/kg for food supplements. There is no harmonised EU maximum for total arsenic, so the specification sets one.

The EU does not harmonise maximum vitamin levels, so a member state can apply its own national rule. The EFSA tolerable upper intake level for adults, 100 µg/day, is a scientific reference, not a product maximum.

The US route

In the United States, cholecalciferol is a dietary ingredient under DSHEA and was marketed before 15 October 1994, so the pre-1994 route applies rather than a new dietary ingredient notification. The finished product is made under 21 CFR 111, which requires identity testing of each component and supplier qualification.

The Supplement Facts panel follows 21 CFR 101.36. Vitamin D is declared in micrograms against a Daily Value of 20 µg (800 IU); IU may be added in parentheses after the microgram figure but is optional. The source is named in the ingredient list as cholecalciferol. A structure/function statement needs the DSHEA disclaimer and must not be a disease claim.

No federal lead maximum exists for supplements, so US buyers set their own and check state exposure rules such as California's Proposition 65. The supplier's certificate supports the buyer's identity test; it does not replace it.

The UK route

Great Britain retains a permitted-forms list copied from the EU lists and amended since. The Food Supplements (England) Regulations 2003, with parallel instruments in Scotland and Wales, list the vitamins and forms that may be used, and cholecalciferol is on the list. The label carries the UK supplement particulars and a nutrient reference value of 5 µg (200 IU).

Contaminant limits were carried over at the EU values, and the GB claims register lists the permitted wording. Northern Ireland applies EU rules under the Windsor Framework, so a GB-only check is not enough. Re-read the current text before artwork is signed off.

The limits in the file

Catalog limits and the market note that belongs beside each
ParameterCatalog limitWhat the market file needs
Lead≤3 mg/kgResult against the 3.0 mg/kg EU supplement limit; check any national or state rule
Cadmium≤1 mg/kgResult against the 1.0 mg/kg EU supplement limit
Mercury≤0.1 mg/kgResult against the 0.10 mg/kg EU supplement limit
Arsenic≤2 mg/kgNo harmonised EU supplement maximum; the buyer sets the limit
MicrobiologyAPC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absentMethod and result for each test
Loss on drying≤5.0%Result and basis, because moisture affects the as-sold IU/g

These are catalog limits, not a statement that every market applies the same legal maximum. The certificate shows the result; the file maps it to the ceiling for the destination.

Where the claim boundary sits

In the EU, Regulation (EC) No 1924/2006 and the EU Register govern claims. A claim may be used only if it is on the Register, matches its conditions of use and is not a disease claim. Vitamin D has authorised claims, but this page does not reproduce them; the brand's review decides whether a claim is available for its product and dose.

In the US, a structure/function statement needs the DSHEA disclaimer and must not be a disease claim. In the UK, the GB register governs; an EU-authorised claim is not automatically available in Great Britain. The ingredient name is not a claim: “cholecalciferol” and “100,000 IU/g” are specification terms. This supplier makes no health claim, and the brand owner is responsible for every statement on the pack.

The document set

Documents a brand should hold for a vitamin D3 lot
DocumentWhat it should establish
Certificate of analysisLot code, IU/g, carrier, loss on drying, particle size, contaminants, micro
SpecificationThe release limits the certificate is judged against
Technical data sheetGrade, carrier, dispersion, pack, storage and shelf life
Safety data sheetHandling, storage and transport classification
Source statementLanolin or lichen route, manufacturing site and carrier source
Allergen and GMO statementsThe declarations the destination market requires
Stability summaryThe data behind the shelf life and the storage statement

A short checklist

  • Does the certificate name the lot, the grade in IU/g and the carrier?
  • Is the vitamin D3 result on the stated basis and above the 100,000 IU/g floor?
  • Do lead, cadmium, mercury and arsenic meet the destination limits?
  • Does the label use micrograms and the market's reference value (5 µg in the EU and UK, 20 µg in the US)?
  • Is the carrier declared in the ingredient list?
  • Is every claim on the pack permitted for this form and this market?
  • Do the COA, the pack label and the retained sample share one lot code?

The product specification is on the vitamin D3 product page. The certificate is explained on the COA page; the grades on the grade page; the identity evidence on the identity page; the packaging terms on the MOQ page. The release workflow is on the quality page, and the D3 versus D2 basis is on the D3 versus D2 page.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation