01 COA & batch testing

What the COA for beta-carotene pure actually contains

Technical document 01 · Reviewed 2026-11-20 · Beta-Carotene Pure

On this page
  1. The certificate as a test report
  2. What the 97.0% is a percentage of
  3. Release limit and batch result
  4. What moves between lots
  5. When to use an outside laboratory
  6. What to compare between suppliers

A certificate for a beta-carotene pure lot reports appearance, UV/Vis identification and assay, loss on drying, the heavy-metal panel, microbiology and particle size. The catalog assay is ≥97.0% by UV/Vis, and the certificate has to state the solvent, the wavelength and the basis beside that figure. The limits below are the catalog specification; the batch COA is the evidence for a particular pack.

In one line

A 97.0% beta-carotene figure is only meaningful with its basis: the UV/Vis method, the solvent and the loss on drying beside it decide what the percentage describes.

The certificate as a test report

A certificate can be audited only when each line carries four things: the parameter, the method, the release limit and the measured result. A row that reads “conforms” without a method asks the reader to accept a conclusion; here the identity row and the assay row answer separate questions.

Identity asks whether the chromophore is beta-carotene; assay asks how much colouring matter the lot contains. A lot can pass the assay and still be a diluted crystal or an oxidised material, because UV/Vis is blind to those differences.

Release tests and methods for beta-carotene pure
ParameterMethodRelease limit
AppearanceVisualRed to orange-red crystalline powder
IdentificationUV/Vis spectrum against a beta-carotene standardConforms
AssayUV/Vis spectrophotometry≥97.0% beta-carotene
Loss on dryingGravimetric≤0.5%
Lead (Pb)ICP-MS≤3 mg/kg
Arsenic (As)ICP-MS≤2 mg/kg
Cadmium (Cd)ICP-MS≤1 mg/kg
Mercury (Hg)ICP-MS≤0.1 mg/kg
Aerobic plate count (APC)Plate count≤1,000 cfu/g
Yeast and mouldPlate count≤100 cfu/g
E. coliAbsence testAbsent
SalmonellaAbsence testAbsent
Particle sizeSieve analysis≥95% through 80 mesh

The 80 mesh line is part of the grade, not a packing preference: it is finer than the 40 mesh of the 10% dispersion, and a lot that fails it handles differently even at the right assay.

What the 97.0% is a percentage of

Beta-carotene is measured by UV/Vis at a dilution against a standard of assigned content. The result depends on the solvent, the wavelength and the standard, so all three belong in the method line. The absorption has fine structure across roughly 425–480 nm, and reading at the wrong maximum, or against a degraded standard, moves the number without changing the powder.

The basis is the second half of the definition. A result “as supplied” includes moisture and residual solvent in the denominator; a result “on the dried basis” removes the moisture. The catalog allows loss on drying up to 0.5%, so the two bases differ by at most about half a percentage point: 97.0% as supplied with 0.5% moisture calculates to about 97.5% on the dried basis. That is a small correction, but the certificate still has to say which basis was used.

UV/Vis measures total colouring matter that absorbs at the chosen wavelength. It does not separate all-trans beta-carotene from cis isomers, and it does not see a colourless oxidation product; the balance of the 100% is other carotenoids, cis forms, oxidation products, moisture and residual solvent. If the specification or the label depends on the isomer profile, the certificate needs an HPLC line beside the UV/Vis assay. The EU E160a(ii) purity criterion is not less than 96% total colouring matter; the catalog floor of 97.0% is close, but the method and basis must be compared before the two are read as one gate.

Release limit and batch result

The release limit is the boundary a beta-carotene lot must meet; the batch result is the figure the laboratory measured on that lot. The two belong side by side, each with its method named. A result column that repeats the specification range is not evidence.

What the result column should contain
ParameterRelease limitResult column
Assay≥97.0%A measured percentage, with solvent, wavelength and basis
IdentificationConformsThe maxima, or the spectrum attached to the report
Loss on drying≤0.5%A measured percentage
Heavy metalsPer elementA figure in mg/kg for each of lead, arsenic, cadmium and mercury
MicrobiologyCounts and absenceThe count plus the absence statement for the lot
Particle size≥95% through 80 meshThe measured percentage through the sieve

“Passes specification” is a conclusion the reader should reach from the numbers. Heavy metals need one figure per element, not a total that hides the high one; microbiology needs a count and an absence statement, because they answer different questions.

What moves between lots

Crystallisation, drying and milling move the assay, the colour, the moisture and the particle size. The crystallisation solvent and the drying profile also move the residual-solvent result; none of these is a change in the molecule.

Colour is the least quantitative line and often the first sign of a difference. Red to orange-red covers a real window, and particle size alone shifts the shade: a finer powder looks lighter and more orange, a coarser one darker and redder. Oxidation and a cis-rich lot also dull the colour while the assay stays above the floor.

Read trends rather than single points: an assay drifting toward 97.0%, loss on drying climbing toward 0.5%, a new peak in the HPLC profile or a particle-size result that only just passes. The lot code on the certificate should run through the pouch, the drum and the retained sample.

When to use an outside laboratory

An independent test is worth ordering for a new source, a first shipment into a regulated market, a disputed identity or a label that names all-trans beta-carotene. The panel should not simply repeat the certificate. Ask for UV/Vis identity and assay with a certified standard, an HPLC carotenoid and isomer profile, loss on drying, ICP-MS for the metal panel, microbiology and a residual-solvent screen.

Add X-ray diffraction where the question is crystallinity rather than purity, and a solvent-residue method matched to the declared route. Ask for a detection limit with every screen: a “not detected” line without one describes the method, not the sample.

Keep the chain of custody with the sample. The referee should receive the retained pack, the certificate and the agreed specification, and the report should name the lot. If a result is disputed, ask for the tests that distinguish the grade rather than a second run of the same assay.

What to compare between suppliers

Six lines make the comparison: the form and CAS number; the assay and its basis; the UV/Vis method and the spectrum; the isomer profile; loss on drying and particle size; and the residual-solvent statement. Two quotations that agree on 97% but differ on basis or isomer profile are not describing the same powder.

The form line matters most for this product. A supplier who ships a 10% dispersion against an order for the pure crystal will meet a “beta-carotene” description and fail the assay, the carrier declaration and the dose. The catalog specification for this grade sits on the beta-carotene pure product page; the tests that separate it from a dispersion are on the identity page; the grade comparison is on the grades page; the analytical methods are described in the methods library; and the release workflow is on the quality page.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation