05 Compliance

The regulatory file for beta-carotene pure

Technical document 05 · Reviewed 2026-11-20 · Beta-Carotene Pure

On this page
  1. What the file contains
  2. European Union
  3. United States
  4. Contaminants and purity limits
  5. Claims and label language
  6. Documents in the file
  7. Checklist before the first order

A single beta-carotene lot can enter a market on two different legal routes. If it colours the product, the additive rules apply; if it supplies vitamin A, the nutrient rules apply, and some products use both. The EU colour entry is E160a(ii) in Regulation (EC) No 1333/2008, with purity criteria in Regulation (EU) No 231/2012; in the US, colour use falls under 21 CFR 73.95 and nutrient use under the GRAS affirmation at 21 CFR 184.1245. The buyer's team records the route before the label is set.

In one line

A beta-carotene specification is only half the file: the route, the limit and the label depend on the market, the use and the finished dose.

What the file contains

A complete file answers four questions: what the material is and which specification version is bought; which lot is released and what its certificate reports; which route and label rules apply to the finished product; and what changes if the source, solvent or pack changes. The certificate, data sheet and safety data sheet answer different questions; none answers the route alone.

The route has two branches. Used for colour, the material is a food additive and the additive entry, purity criteria and colour declaration apply. Used for vitamin A, it is a nutrient and the nutrition labelling and supplement rules apply. The same crystal can sit on either branch; the use decides, not the product name.

European Union

Beta-carotene is the colour E160a(ii) in Regulation (EC) No 1333/2008, which sets food categories and maximum levels; the buyer's team confirms the category and level for the finished product. The purity criteria sit in Regulation (EU) No 231/2012: not less than 96% total colouring matter as beta-carotene, read at the specified absorbance maximum, with the purity limits of that entry.

The 96% criterion is written for the colouring matter, the article this grade supplies. The catalog floor of 97.0% sits above it, but the comparison holds only when the method and basis are the same; the buyer confirms that before reading the certificate against the additive specification. For a food supplement, Directive 2002/46/EC and national rules apply alongside the additive rules.

EU labelling sits in Regulation (EU) No 1169/2011. If the finished label presents beta-carotene as vitamin A, the declaration is in retinol equivalents, and the conversion is 6 µg of all-trans beta-carotene to 1 µg RE. The calculation uses the carotenoid content of the dose, never the weight of the crystal. Check the consolidated text and claims register at the time of review.

United States

The colour additive regulation for beta-carotene is 21 CFR 73.95: permitted for colouring foods generally, in amounts consistent with good manufacturing practice, with batches exempt from certification. The nutrient route is the GRAS affirmation at 21 CFR 184.1245, which covers beta-carotene as a nutrient supplement under the conditions stated there.

DSHEA labelling and cGMP rules also apply to a US dietary supplement. Vitamin A from beta-carotene is declared in the Supplement Facts panel in mcg RAE, and the panel may state how much of the vitamin A comes from beta-carotene. The conversion is 12 mcg of dietary beta-carotene per mcg RAE, or 2 mcg when the beta-carotene is in oil in a supplement. The matrix matters: a dry crystal does not automatically take the 2:1 figure. The buyer's regulatory team confirms both the conversion and the route.

Colour use and nutrient use produce different labels. Beta-carotene added purely for colour need not be declared as vitamin A; one presented as vitamin A must satisfy the nutrient rules. The supplier's certificate does not make that choice for the brand.

Contaminants and purity limits

The limits below are the catalog specification for this grade, not the finished-product limit; that calculation is the buyer's. The EU additive specification also sets residual-solvent limits, which belong in the file when the crystal is sold as a colour.

Release limits for beta-carotene pure and what the file should show
ParameterCatalog limitWhat the file should show
Assay≥97.0% by UV/VisMeasured result, with solvent, wavelength and basis
Loss on drying≤0.5%Measured percentage for the lot
Lead, arsenic, cadmium, mercuryPb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kgA measured figure per element, plus the finished-product calculation
MicrobiologyAPC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absentThe count and the absence statement for the lot
Particle size≥95% through 80 meshThe measured percentage through the sieve
Residual solventsPer the declared route and destination specificationThe solvent list, the limits and the lot result

The 97.0% assay and the 96% purity criterion are not automatically the same gate. They may agree once method and basis are aligned, but the specification must say which article and basis it describes; a number without that context cannot be checked against a legal text.

Claims and label language

No disease-related claim is made for beta-carotene on this site. EU health claims need authorisation under Regulation (EC) No 1924/2006 and a place in the EU register; a vitamin A claim also depends on the daily portion reaching the nutrient threshold for “source” or “high”. In the US, a structure/function statement must be truthful and not misleading, and a supplement that carries one needs the DSHEA disclaimer. Wording is checked by the brand's reviewer for the product and market.

A certificate and a label are different instruments. The certificate supports the material, the label speaks for the finished product, and neither approves the other. When the label declares vitamin A, the destination conversion applies to the carotenoid mass, not the powder weight.

Documents in the file

  • Specification with the grade, CAS number, isomer expectation and assay basis.
  • Batch COA with the UV/Vis result, identity spectrum, contaminants, microbiology and particle size.
  • Technical data sheet and safety data sheet.
  • Allergen, GMO and origin statements; natural versus synthetic origin if the label uses that word.
  • Residual-solvent results for the declared manufacturing route.
  • Vitamin A calculation for the finished product, if the nutrient route is used.
  • Change-control record for the source, solvent and pack.

Name any missing lot statement before the order, not at the port. A versioned document list beats a folder of undated PDFs. The product hub carries the catalog specification; the identity page covers the analytical evidence; the vitamin A page covers the nutrient side; the EU regulatory notes collect the framework references; the quality page describes the release file.

Checklist before the first order

  • The grade, CAS number, isomer expectation and assay basis are named in the specification.
  • The intended use — colour or nutrient — and the destination market are written on the order.
  • The COA, TDS, SDS, allergen, GMO, origin and solvent statements are on file.
  • The contaminant results are converted to the finished-product dose.
  • The label and the claim have been reviewed for the destination, including the vitamin A conversion.
  • The source, solvent and pack are under change control.

The 10% CWD product page shows how the dispersion grade differs; the COA page explains the lot certificate; the methods library describes the tests behind the file.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation