Beta-carotene pure: MOQ, packaging and ordering
Beta-carotene pure is sold from 1 kg, packed in a 1 kg foil pouch, with a 25 kg fiber drum as the bulk unit. The standard pack ships in 1–7 days. To quote firmly, the supplier needs the form and CAS number, the assay basis, the pack and quantity, the destination and Incoterm, the document set and the intended use.
The 1 kg pouch is a traceable lot before it is a quantity: it can be sampled, tested and retained, and the 25 kg drum is the production unit.
Why the minimum is 1 kg
One kilogram of the crystal carries at least 970 g of beta-carotene. At a 10 mg dose that is a very large number of servings, so the first order is almost never limited by the carotenoid itself. The constraint is the trial, the retained sample and the analytical work that has to happen before a production order, and a 1 kg pack covers all three from one lot.
The pack is also small enough to ship as a parcel and to keep in a dark cabinet without a pallet. The material tested, the material retained and the material used in the trial can then be the same lot, which is the point of a minimum: a traceable unit, not a gesture.
Smaller quantities are usually split out of a larger lot and repacked. The split adds handling, detaches the material from its original pack identity and weakens traceability, while the chemistry stays the same. If a bench trial needs less, ask for the repack to be documented.
Packs and formats
| Pack | Net weight | Typical use | Notes |
|---|---|---|---|
| Foil pouch | 1 kg | Trial, sample, small batch | Light and moisture barrier; reseal after opening |
| Fiber drum | 25 kg | Production | Inner liner; lot code on drum and liner |
| Oil suspension | On request | Oil-based blending | A different format with its own specification |
The catalog form is a crystalline powder with at least 95% through 80 mesh. The oil suspension is a format change, not a packing choice: it changes the carrier, the assay basis and the handling, and it needs its own specification and stability data. Say so before the quotation if the process would rather pump a suspension than weigh a crystal.
Lead time and dispatch
The standard pack is quoted at 1–7 days from confirmation. Picking, document preparation and dispatch sit inside that window; transit, customs and the customer's own release do not. A custom pack or an oil suspension needs its own lead time, stated separately on the quotation.
Ask for the dispatch date, not only the range. A 1 kg pouch usually moves as a parcel while the 25 kg drum travels on a pallet, and the Incoterm decides who books the freight and who clears entry. The COA and the rest of the lot documents should travel with the pack, not arrive after it. The crystal is light-sensitive, so the pack should stay closed and out of direct sun in transit and in the warehouse.
What a quotation needs
Six items make a quotation firm enough to compare:
- Product and form. Beta-carotene pure, crystalline, CAS 7235-40-7, with the all-trans expectation stated.
- Specification. Assay and basis, loss on drying, particle size, heavy metals, microbiology and the residual-solvent statement.
- Quantity and pack. 1 kg pouch, 25 kg drum, or an oil suspension on request.
- Destination and Incoterm. The country, the port or address, and the trade term.
- Documents. COA, specification, SDS, and any market-specific statement the importer needs.
- Intended use and market. Colour or nutrient, supplement or food, and the market where it will be sold.
A quotation that names only “beta-carotene” has left the grade and the carrier open. The same generic name covers a 97% crystal, a 10% dispersion and an oil suspension, and the label, the dose and the analytical panel change with the choice. We do not publish commercial terms on this page; they are stated on the quotation.
The sample is a lot, not a demonstration
The 1 kg pack is the qualification lot. Before scaling, test identity, assay, loss on drying, the isomer profile, particle size and microbiology, and retain a sample from the same pack. The lot code should agree across the sample, the certificate and the quotation; a sample that cannot be tied to a lot is a demonstration, not a qualification.
Test the crystal in the intended matrix as well. A lot that dissolves cleanly in warm oil on the bench can still throw a haze or a sediment in a cold fill, and a colour match in a dish can shift after the softgel is dried. The methods library describes the UV/Vis assay and the supporting tests.
For a bench quantity below the pack size, raise it before the order. A split is a repack with its own traceability, not the catalog pouch, and it should be documented. The bench sample and the production drum may come from different lots even when both meet the specification.
Terms to settle before the first order
The quotation carries the commercial terms, the Incoterm, the pack, the lead time and the documents. Put the quality terms alongside: the specification revision, the certificate per lot, the retained sample, the retest period, and change control for the source, the crystallisation solvent and the pack. A source or solvent change can alter the residual-solvent statement and the identity file, so it belongs under change control.
Returns and replacements follow the quotation and the quality agreement. If a lot misses the agreed specification, the route is the retained sample and a joint re-test against the named method, not a photograph of the powder. Decide in advance who pays for the referee laboratory and which laboratory both sides accept.
The product hub carries the catalog specification; the COA page lists the release tests; the compliance page covers the market files; the 10% CWD product page covers the dispersion grade; the MOQ glossary entry defines the term; the quality page describes the release file.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation