What the COA for spermidine actually contains
The certificate for a spermidine lot reports appearance, identification by GC or HPLC and by IR, assay by GC or HPLC, water by Karl Fischer, particle size, the heavy-metal panel and microbiology. Each line should carry the method, the acceptance limit and the result measured on that lot. The values here describe the catalog specification; a particular pouch or drum is confirmed by its batch COA. An assay on its own does not say whether the 98.5% refers to the free base, to a salt, or to the powder as sold.
A ≥98.5% assay answers how much of a molecule is present; the form, the method and the water figure say which molecule and on which basis.
The certificate as a test report
A spermidine certificate is short, so every line has room to be specific. The molecule is a small basic polyamine with no useful ultraviolet chromophore, which is why the assay method deserves more attention here than on a mineral salt: GC and HPLC are both used, and the certificate should say how the detector sees the molecule.
| Parameter | Method | Release limit |
|---|---|---|
| Appearance | Visual | White to pale cream crystalline solid or melt |
| Identification | GC or HPLC retention against a reference; IR | Conforms to the reference |
| Assay | GC or HPLC | ≥98.5% |
| Water | Karl Fischer | ≤1.0% |
| Parameter | Method | Release limit |
|---|---|---|
| Lead | ICP-MS | ≤3 mg/kg |
| Arsenic | ICP-MS | ≤2 mg/kg |
| Cadmium | ICP-MS | ≤1 mg/kg |
| Mercury | ICP-MS | ≤0.1 mg/kg |
| Particle size | Sieve | ≥95% through 40 mesh |
| Total aerobic count | Plate count | ≤1,000 cfu/g |
| Yeast and mould | Plate count | ≤100 cfu/g |
| E. coli | Absence test | Absent |
| Salmonella | Absence test | Absent |
GC, HPLC and the basis behind the percentage
GC may run on the free base or on a derivative; either way the method has to be built for a basic amine, and a capillary column with a nitrogen-selective detector is one arrangement. HPLC is often chosen for a salt or for a laboratory that prefers a liquid method, and there the detector matters. With no chromophore on the molecule, a UV method implies that the sample was derivatised before injection; a method without derivatisation needs a detector that responds to the amine itself, such as mass spectrometry, evaporative light scattering or charged aerosol. A certificate that says "HPLC 98.7%" without the detector leaves the reader unable to judge the number.
Two basis questions sit behind that percentage. First, is the assay calculated on the powder as sold or on the dried solids? With water allowed up to 1.0%, a lot at 98.5% as-is is about 99.5% on an anhydrous basis, and the two statements describe the same drum. Second, which form was weighed? Spermidine free base is CAS 124-20-9 and the trihydrochloride is CAS 334-50-9; the salt is roughly 57% free base by mass, so a 98.5% assay on the salt corresponds to about 56% spermidine. The certificate should name the form and the CAS, and the purchase order should name the same one.
Release limit versus batch result
The release limit is the boundary the lot was accepted against. The batch result is what the laboratory measured. A certificate that prints the specification range in both columns has not reported a result; it has copied the gate. On a short certificate the distinction is easy to audit.
Water is the row where the result carries the most information. At ≤1.0%, a lot at 0.2% and a lot at 0.9% both pass, but they behave differently in a capsule room and in a pouch that will be opened repeatedly. Assay close to 98.5% deserves the same attention: it leaves less room for related polyamines and water, and the mass balance should be readable. The metal and microbiology lines read as pass or fail against fixed limits, but the individual element and count results still belong on the page; "conforms" is a conclusion, not evidence.
What moves between batches
Assay and the related-peak profile follow the synthesis and the purification. Water follows the drying step, the packing room and the season; a lot packed on a humid day can sit at the top of the water window with the assay unchanged. Appearance and particle size follow crystallisation, the melt handling and the milling step, which is why a 40 mesh powder and a resolidified melt can share a certificate but not a filling line.
The chromatogram is the part of the record that is most often summarised away. Putrescine and cadaverine are close relatives of spermidine and can appear as neighbouring peaks; a report that lists only the main peak has not shown whether they were separated. Ask for the related-substance section, not only the assay. A trend of rising water across several lots points at packing, while a rising related-peak area points at the process, and the two call for different replies.
When to order an outside test
An independent laboratory is worth the delay when the supplier is new, when the first delivery goes into a regulated market, when the form is disputed, or when a quotation looks unlike the rest of the market. The useful panel is targeted rather than exhaustive: GC and HPLC on the same submitted sample, IR against a reference spectrum, Karl Fischer water, ICP-MS for the metal panel, and a polyamine scan that reports putrescine and cadaverine with a stated limit of detection.
Ask the laboratory to print its detection and quantification limits. "Not detected" without a limit describes the method, not the sample. Where the question is whether the powder is an isolate or an extract, the same sample should also be screened for sugars and other extract solids; an assay that passes while water and the related peaks do not add up points at what else is in the drum.
Chain of custody matters as much as the method: the sample tested should be the sample retained, and its lot code should match the pack and the supplier's certificate.
What to compare between suppliers
Compare six lines: the form and its CAS; the assay method and basis; water; the related polyamines; particle size; and the metal and microbiological results. If two quotations agree on the assay and diverge on the other five, they are not describing the same powder. A salt quoted against a free-base specification will pass an assay and fail the mass balance, while an extract sold as an isolate will fail the water and the related peaks.
Traceability is the second test. The code on the certificate, the pack and the retained sample should be one code, and the certificate should name the manufacturer. A genuine certificate can still be attached to the wrong drum.
The catalog specification sits on the spermidine product page. The source routes are compared on the grade page, the tests that separate the molecule from its neighbours are on the identity page, and the release workflow is described on the quality page. The chromatographic method is outlined in the HPLC method note.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation