Spermidine: MOQ, packaging and ordering
An order can start at 1 kg, cut from a lot that has already been released and sent with that lot's certificate. Production runs use the 25 kg fiber drum; the 1 kg foil pouch is the trial format. Dispatch is quoted at 1–7 days after confirmation, but only once the source route, the pack and the destination market are fixed. Because the material may be a crystalline solid or a melt, the pack and the temperature it is kept at are part of the order.
One kilogram drawn from a released lot is the qualification unit; the source route and the destination market shape the rest of the order.
Why the minimum is one kilogram
The first purchase exists to qualify a material, not to stock a shelf. One kilogram is enough for laboratory work, a pilot run on an encapsulator or tablet press, and a brief stability check, with material left over for a repeat. It is cut from a released lot, so the trial powder and the certificate in the file come from the same batch.
One kilogram is also a packing and documentation unit. Where the lot is large enough, a bigger order is drawn from it; where it is not, a fresh lot is made and a fresh certificate issued. The certificate follows the lot that fills the drum, so pouch, drum and paperwork should carry the same lot code.
The small order tests handling too. A hygroscopic solid with a low melting point shows quickly how it behaves after the first opening, how carefully the liner has to be closed, and whether it survives the journey into the buyer's store.
Packaging
| Pack | Where it fits | Notes |
|---|---|---|
| 1 kg foil pouch | Trial, sample and small runs | Food-grade liner sealed inside; desiccant for humid climates; name, form and lot printed outside |
| 25 kg fiber drum | Production | Lined, tamper-evident, with the lot label on the outside |
What the powder actually touches is the liner; once it is split, or the drum is left open, the storage condition changes whatever the label says. A desiccant can be added to the packing specification for a humid destination. For the melt form, transit and storage temperatures have to be agreed as well, because a warm container can turn an intact pack into a solid block.
Each pack should show the product name, source route, form, net mass, lot and storage condition. If those details cannot be tied to a certificate, traceability has failed before the powder is used. Both formats should be opened and closed in a dry area; the pouch is a working pack rather than a retail pack and needs resealing between weighings.
Lead time
Dispatch is quoted at 1–7 days from confirmation of the specification and the order. The clock does not start at the first enquiry; it starts when the source route, quantity, pack and paperwork are agreed. Milling to 40 mesh, granulation, a dilution or an outside laboratory test takes extra time and should be a separate line on the quotation.
Three things usually move the date: a specification changed after confirmation, a document asked for late, and a destination rule that requires a licence or another test. Putting all three on the table in the first exchange protects the date better than chasing it afterwards. A launch date belongs in the brief, not in a later message.
What the quotation needs
Six answers make an enquiry quotable:
- Which source route and form are wanted — free base, trihydrochloride or wheat germ extract — with the CAS and the specification version?
- How much is wanted for the first delivery, and what annual volume should be planned for?
- Where will the powder go — capsule, tablet, stick pack, drink or gummy — and in which pack?
- Which destination market, and which intended use?
- Which documents does that market require — certificate, technical data sheet, safety data sheet, allergen statement, authorisation reference?
- Which delivery date and Incoterm apply?
A competitor's certificate is a useful substitute for a written brief early on, because it shows the tests and limits the buyer already works to. Send it and the answer becomes a counter-specification: what can be met, what cannot, and what would need a trial. A quotation that says only “spermidine” has not yet quoted a material.
Samples
A sample comes from a released lot and is sent with that lot's certificate. Ask for the form the trial will use — 40 mesh, granulated or diluted — rather than the catalog powder, or the trial will answer a question nobody asked. A sample with no certificate is a demonstration, not a qualification.
The amount should match the trial protocol: enough for the capsules or tablets and the panel, plus a reserve. Keep part of it back as a sealed, dry reference so the trial result can be compared with the production lot later.
Payment, claims and terms
Payment terms, Incoterm and the document set are fixed in the order confirmation. Destination, volume and whether the buyer is new all change them, so a website cannot state them in advance.
A complaint is assessed against the retained sample and the certificate for that lot. Raise it as soon as the pack is opened, with photographs of the outer pack and its lot label, so it can be attached to the lot record. A purchase order should name the source route, form, assay method and basis, water limit, mesh, pack and documents, and attach the specification so the certificate can be checked line by line.
What belongs on the certificate is explained on the COA page; how a change of source route affects the order is on the grade page; the compliance page covers the market question before the first drum is booked. The quality page describes the lot record; the spermidine product page carries the catalog specification.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation