02.1 Fermentation vs wheat germ

Fermentation spermidine vs wheat germ: source, profile and label

Technical document 02.1 · Reviewed 2026-11-20 · Spermidine Fermentation

On this page
  1. Two sources, two articles
  2. The profile behind the percentage
  3. What the source does to the dose
  4. What the label has to say
  5. The regulatory file follows the source
  6. When to choose which

Fermentation spermidine and wheat-germ spermidine are separate articles. The fermentation product is a trihydrochloride salt at ≥98.0% by HPLC, putrescine ≤0.5%, 80 mesh; the wheat-germ product is an extract at 0.8–2.4 mg spermidine per gram. One gram of the salt carries about 559 mg of spermidine, one gram of the extract at most 2.4 mg, so the dose mass, the allergen statement and the regulatory file all change with the source.

In one line

The source decides the article: a fermentation salt carries about 559 mg of spermidine per gram, the authorised wheat-germ extract 0.8–2.4 mg, and the label has to describe the one in the pack.

Two sources, two articles

Fermentation spermidine is produced by microbial fermentation, purified and converted to the trihydrochloride. The source is a process, not a molecule: the same spermidine can be made another way, and the assay cannot tell the routes apart. The source claim rests on the manufacturing description, the fermentation declaration and the supply-chain record.

The wheat-germ route starts from wheat germ and makes an extract. It is a mixture sold on its spermidine content, and the Union list in Implementing Regulation (EU) 2017/2470 describes an extract of non-fermented wheat germ at 0.8–2.4 mg/g. The wheat germ is where the cereal allergen statement comes from, and the extract matrix is part of the article rather than an impurity to be minimised.

Neither route is a purified version of the other. One is a salt of a single molecule; the other is a food-derived extract with its own authorised description. A purchase order that names only “spermidine” has not chosen either.

The profile behind the percentage

What one gram of each article carries
ArticleSpermidine per gramSource and profile
Fermentation trihydrochloride, ≥98.0% HPLCAbout 559 mgPutrescine ≤0.5%; no wheat-derived carrier in this specification
Wheat-germ extract, 0.8–2.4 mg/g0.8–2.4 mgExtract matrix; wheat allergen statement; EU authorised range
Pure free base, ≥98.5%About 985 mgDifferent article, shown for comparison

The profile is more than the assay. The fermentation specification caps putrescine at 0.5%, a neighbouring diamine that can co-elute on an HPLC method not built to resolve it; the extract carries spermidine at a low level alongside spermine and the rest of the matrix. Comparing a 98% salt with a 0.2% extract on one scale would describe neither article.

The salt figure is not a purity failure. The trihydrochloride is 57.0% spermidine by mass, so a high-purity salt reads about 56% spermidine. The extract figure is already a content in milligrams per gram. Converting one into the other without the form and the source is where the dose arithmetic goes wrong.

What the source does to the dose

For a label that declares 5 mg of spermidine, the fermentation salt needs 5 ÷ 0.559 = 8.94 mg of powder; the extract needs 2.08 g at 2.4 mg/g or 6.25 g at 0.8 mg/g. Those are arithmetic examples, not a dose recommendation.

The dosage form follows. A few milligrams fit a small capsule, and the excipients dominate the fill. Grams change the format: the extract suits a stick pack, a powder for dispersion or a multi-capsule serving, not a single small capsule. A dilution of the salt can make a small dose weighable on a line, but it is a declared specification and the label has to say so.

The same arithmetic explains why the two articles are not interchangeable at one milligram claim. A formula built on 5 mg of extract delivers a fraction of the spermidine in a formula built on 5 mg of the salt, and a switch either way is a reformulation.

What the label has to say

In the EU, the Union entry gives the extract its own designation: it must be labelled as a spermidine-rich wheat germ extract, and the entry also carries the adult condition and the daily intake. The fermentation salt is a different article and cannot use that designation. Where it is lawfully used, it is named as the substance in the ingredient list, with the quantity per serving in the supplement panel.

Annex II to Regulation (EU) No 1169/2011 lists wheat among the cereals containing gluten, so the extract route brings an allergen review. This fermentation specification has no wheat-derived carrier, so that declaration does not arise from the source; the source statement and the specification still belong on the label and in the file.

In the US, the Supplement Facts panel gives the amount per serving and the ingredient list names the source. The label describes the article in the pack, not the article considered during development. A source change is an artwork change, not a purchasing detail.

The regulatory file follows the source

The EU entry for the extract is not a generic spermidine entry. It fixes the article, the 0.8–2.4 mg/g range and the conditions; a fermentation-derived trihydrochloride does not inherit it. The fermentation article needs its own route, confirmed by the buyer's regulatory team against the current consolidated text for the destination market.

The UK does not have one file either. Great Britain applies the GB register and GB labelling; Northern Ireland follows the EU framework. The delivery address decides, and the file should record the route and the article together so that a later source change is visible as a regulatory change. A specification written for one article does not support a label written for the other.

When to choose which

Choose the fermentation salt for a capsule or tablet with a small declared dose, a market where the fermentation article has a route, a label that should not carry a wheat allergen, and a specification built on the salt, the putrescine limit and the 80 mesh powder. Choose the extract when the serving mass is already measured in grams, the label can carry the wheat statement, and the file is built around the authorised extract.

A switch after the label is written is a change of product: content, allergen status, authorised designation and regulatory file all move. The fermentation product page holds the catalog specification. The grades page sets this comparison in the wider range, the compliance page covers the market route, and the identity page lists the tests that separate the articles. The methods library explains the techniques, the spermidine product page covers the free base, and the quality page the release workflow.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation