05 Compliance

The regulatory file for fermentation spermidine

Technical document 05 · Reviewed 2026-11-20 · Spermidine Fermentation

On this page
  1. What the file contains
  2. European Union
  3. United States
  4. United Kingdom
  5. Contaminants and limits
  6. Claims for fermentation spermidine
  7. Documents for the fermentation spermidine file
  8. Checklist before the first order

The fermentation spermidine file is built around the trihydrochloride salt: the free base is CAS 124-20-9, the salt is CAS 334-50-9, and the source is fermentation. The destination and the finished-product use decide which route applies. The buyer's regulatory team signs off that route; this page sets out the documents and checks the folder should hold.

In one line

A source change is a regulatory change: the fermentation salt and the wheat-germ extract are different articles, and each needs its own file.

What the file contains

The folder has four jobs. It fixes the specification version, it holds the certificate for the released lot, it records the limits and label rules for the destination, and it shows how a change of source, process or pack is controlled. The COA, TDS and SDS fill parts of that structure, but none of them chooses the market route. That decision is written down separately and owned by the buyer's regulatory team.

Fermentation is a source claim as well as a process. No assay can show that a lot was made by fermentation, so the folder carries the manufacturing description, the fermentation declaration and the origin record next to the analytical papers. Put a versioned contents list at the front, and record any missing document before the order is placed.

European Union

Inside the EU, the starting point is the Union list in Commission Implementing Regulation (EU) 2017/2470. As of this review it describes a spermidine-rich extract of non-fermented wheat germ, fixes its content at 0.8–2.4 mg/g, restricts it to adult food supplements and ties the daily intake to 6 mg of spermidine. That is a description of the extract. A fermentation-derived trihydrochloride is a different article, so it is checked on its own route against the current consolidated text, and the member-state decision is filed with the order.

Contaminant limits, labelling rules and general food law sit around that route. The file should show the article actually placed on the market and the route that covers it. Citing the extract entry on a fermentation-salt label would leave the two out of step.

United States

On the US side, the file has to show the basis on which the fermentation trihydrochloride is sold as a dietary ingredient, and why that basis reaches the finished product. The supplier provides the document; the buyer confirms the fit. A structure/function claim is reviewed separately: it needs substantiation, and the DSHEA disclaimer has to appear with it.

A “fermentation-derived” label statement is a source statement. It should match the manufacturing description in the folder, not stand alone as a marketing line.

United Kingdom

The UK is not a single market for this file. Great Britain works to the GB register and its labelling rules; Northern Ireland follows the EU list. The ship-to address decides which set applies, and the file records the choice so that a later label check can find it.

Contaminants and limits

Contaminant results are checked at the finished-product level, not only in the drum. The references below are a starting point; the destination text and the daily dose settle the final limit.

Contaminant references to check for the finished product
MetalWhat the folder needsLevel to check
Lead (Pb)Lot value, method, limit and dose calculation3.0 mg/kg in the supplement
Cadmium (Cd)Lot value and any category exception1.0 mg/kg in the supplement
Mercury (Hg)Lot value and method0.10 mg/kg in the supplement
Arsenic (As)Limit and method on the COAAgreed customer or market limit

The metal figures have to be converted through the dose before they can be compared with a supplement limit. Putrescine is a different line: it is a specified related amine at ≤0.5%, so the file carries the measured result and the method. If a customer asks about cadaverine, answer with a measured figure and a stated limit of quantification, not with a general statement.

Claims for fermentation spermidine

The claim file follows the source. The EU extract entry has its own designation and conditions, and the fermentation salt cannot cite them. Wording about cellular renewal or autophagy describes a mechanism; it is not an authorised claim. No market named here permits a disease claim for this material, and this site makes no health claim. A US structure/function claim carries its own substantiation file and the DSHEA disclaimer.

Documents for the fermentation spermidine file

The COA for this article should show the HPLC assay with detector and basis, putrescine with the limit of quantification, IR identity, loss on drying, the metals and the micro count. The specification names the trihydrochloride, both CAS numbers and the fermentation source. The folder also needs the TDS, SDS, origin and GMO statements, an allergen statement, a residual-solvent statement and a fermentation declaration.

The allergen statement and the manufacturing description do different jobs. One lists what is absent; the other describes what the source is. This specification has no wheat-derived carrier, while the extract route is built on wheat germ. Keep both documents in the folder rather than letting one stand in for the other.

For this article the folder begins with the catalog specification and the certificate for the lot. The buyer supplies the destination route, the dose in the finished product and the label review. The supplier holds source, process and pack in change control.

Checklist before the first order

  • The version, salt form, both CAS numbers and fermentation source are written down.
  • The COA, TDS, SDS, allergen, GMO, origin, residual-solvent and fermentation papers are present.
  • Metal values are converted to the finished-product dose.
  • The putrescine value and its method are filed.
  • The label and claim have been reviewed for the destination.
  • Any change of source, process or pack would open a documented review.

The product hub holds the catalog specification. The COA page describes the lot certificate, the identity page the analytical evidence, the methods library the test methods, the quality page the release file, and the EU regulatory notes the framework references. The spermidine product page covers the pure free base, which is a separate article.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation