Fermentation spermidine: MOQ, packs and lead time
An order for fermentation spermidine can start at 1 kg, supplied in a foil pouch; production uses the 25 kg fiber drum. Dispatch is quoted at 1–7 days. A firm quotation needs the salt form and CAS, the assay and putrescine limits, the pack, the destination, the documents and the intended market.
The 1 kg pouch is a released lot in a trial-sized pack, so the powder on the bench and the certificate in the file share one code.
Why the minimum is 1 kg
The first order is a qualification step, not a stock build. A bench trial, a pilot encapsulation or tableting run, an independent identity check and a retained sample all fit inside one kilogram, and the material comes from a released lot, so the trial and the certificate share a batch.
If the request is below 1 kg, the material is split from a larger pack. The split adds handling, breaks the original pack identity and weakens traceability; the chemistry is unchanged. The 25 kg drum is the production pack: less handling per kilogram, but more inventory and a longer storage period.
The powder is hygroscopic, so the pack is part of the logic. A pouch that can be closed properly is easier to keep dry than a drum opened across a production week. The minimum is a pack and traceability choice, not a volume incentive.
Packs and formats
| Format | Where it fits | Net mass | Points to note |
|---|---|---|---|
| Foil pouch | Trial and pilot batches | 1 kg | Moisture barrier; close it properly after weighing |
| Fiber drum | Full production | 25 kg | Lined; lot code on drum and liner |
| Granulated powder | Better flow, less dust | On request | Particle profile changes; new specification line |
| Dilution | Lower potency per gram | On request | Adds a carrier; label changes |
Granulation and dilution are specification changes, not packing options. Tell us before the quotation if the line needs a coarser or freer-flowing powder; the particle-size line, the label and possibly the lead time move with it.
Each pack should carry the product name, the source (fermentation-derived), the form (trihydrochloride), the net mass, the lot and the storage condition. Details that cannot be tied to a certificate are a traceability gap before the powder is used.
Lead time and dispatch
Dispatch for the standard pack is quoted at 1–7 days after the order is confirmed. The window covers picking, documents and handover to the carrier. Transit, customs and the buyer's own release sit outside it. A granulation, a dilution, a non-standard pack or an outside test adds time, and the quotation should show it as a separate line.
Ask for the dispatch date, not only the range. The pouch normally travels as a parcel and the drum as a pallet; the Incoterm decides who books the freight and who clears entry. The lot documents should reach the buyer with the pack, not after it.
Three things move the date: a specification changed after confirmation, a document requested late, and a destination rule that requires another test. Settle them before the order, not after.
What a quotation needs
A quotation can be compared when it answers six questions:
- Product and source. Spermidine trihydrochloride, CAS 334-50-9 (free base 124-20-9), fermentation-derived.
- Specification. Assay ≥98.0% by HPLC, putrescine ≤0.5%, loss on drying ≤1.0%, 80 mesh, metals and microbiology.
- Quantity and pack. A 1 kg pouch, a 25 kg drum, or a granulated or diluted form.
- Destination and Incoterm. Country, port or address, and trade term.
- Documents. COA, TDS, SDS, allergen and GMO statements, origin record, fermentation declaration.
- Intended use and market. The use (supplement, food or other) and the country of sale.
A quotation that says “spermidine 98%” without the salt form and the putrescine limit has not quoted this product. The same percentage on the free base is a different article, and a quotation without the destination market cannot say whether the article fits the file.
The sample is a lot, not a demonstration
The first 1 kg pouch is the qualification unit. Test identity, assay, putrescine, moisture and microbiology before scaling, and retain a sample from the same pack. The codes on the sample, the COA and the quotation should match.
A trial that needs less than a kilogram is a split from a bulk lot. It carries its own handling record and cannot pass as the 1 kg foil pouch; request the split in writing and file its code with the trial results. Bench material and production material can differ in lot even when the specification is identical.
A sample without a certificate is a demonstration. A sample from a different lot than the production pack is a different material for qualification, however close the assay.
Terms to settle before the first order
Set the commercial and quality terms on one page: Incoterm, pack, dispatch window, specification revision, COA per lot, retained sample, retest period, change control and the route for a disputed result. Fix them before the first production order; reopening them after a dispute is harder.
A change of fermentation source, strain, medium or salt step is a change of article until the specification and the label are rechecked. Write that into the quality agreement. When a lot misses the agreed specification, the route is a joint re-test of the retained sample against the named method; a photograph of the drum is not evidence. The agreement should name the referee laboratory and say who pays for it.
The product hub lists the catalog specification. The release tests are on the COA page, the market files on the compliance page, the release record on the quality page, and the term itself in the MOQ glossary entry. Analytical methods are in the methods library, and the pure free base is described on the spermidine page.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation