Fermentation spermidine, free base or wheat germ: choosing the article
Fermentation spermidine is supplied as the trihydrochloride at ≥98.0% by HPLC, with putrescine ≤0.5% and an 80 mesh powder. Two other articles share the name: the free base and the spermidine-rich wheat-germ extract. They differ in salt fraction, spermidine per gram, allergen status and regulatory file, so the article has to be chosen before the label is written.
The grade fixes how much spermidine one gram of powder carries: about 559 mg for the 98.0% trihydrochloride, about 985 mg for a 98.5% free base, and 0.8–2.4 mg for the authorised wheat-germ extract.
Three articles under one name
The fermentation route makes spermidine and converts it to the trihydrochloride, a crystalline salt that is easy to dry, mill and blend. The free base is the same molecule without the chloride, a low-melting solid with its own specification. The wheat-germ extract is made from non-fermented wheat germ and sold on its spermidine content in milligrams per gram, not on a percentage of the molecule.
The source belongs in the grade. This specification has no wheat-derived carrier, while the extract route is built on wheat germ and brings the cereal allergen question with it. A quotation that says only “spermidine 98%” has not named the article, the salt or the source.
None of the three is a purer version of another. The salt is a different chemical entity from the free base, and the extract is a food-derived mixture with its own authorised description.
How the articles compare
| Article | Claim on the pack | Spermidine in 1 g | What the claim describes |
|---|---|---|---|
| Fermentation trihydrochloride | ≥98.0% HPLC | About 559 mg | The salt, 57.0% of which is free base |
| Free base | ≥98.5% GC or HPLC | About 985 mg | The molecule as sold |
| Wheat-germ extract | 0.8–2.4 mg/g | 0.8–2.4 mg | Content of the authorised extract |
The table is arithmetic, not a ranking. The fermentation salt gives about 559 mg of spermidine per gram, the 98.5% free base about 985 mg, and the extract at most 2.4 mg. The salt carries more than two hundred times the spermidine of the extract at the top of its range, which is why the same milligram claim produces very different packs.
The salt figure is not a purity failure. A 98.0% trihydrochloride is a high-purity salt, and the rest of its mass is chloride and proton. Calling it 98% pure and 55.9% spermidine are both correct; using one number without the other is where a label or a weigh-up goes wrong.
What the powder is like to handle
Fermentation spermidine trihydrochloride is a white to off-white powder, freely soluble in water, and the solution is acidic. It is hygroscopic, so the pack and the storage condition belong in the specification rather than in a note added later. The catalog powder is 80 mesh: ≥95% through 80 mesh, finer than the 40 mesh often used for the free base.
The finer powder disperses quickly, but it carries more dust and a larger surface for moisture pickup. A granulated form is available on request when the line needs flow or less dust; that is a new particle-size specification, not a packing choice, and it should be quoted as one.
The free base can arrive crystalline or as a melt and needs a defined handling temperature; a warm journey can change its physical form without changing the assay. The extract is a larger mass of powder with its own carrier, colour and water content. Content uniformity, not solubility, is the practical issue for the extract, because the active sits at a low level in a large powder mass.
What the grade does to the dose
The article decides the mass per serving. For a label that declares 5 mg of spermidine, the 98.0% trihydrochloride needs 5 ÷ 0.559 = 8.94 mg of powder; the 98.5% free base needs 5.08 mg; the extract needs 2.08 g at 2.4 mg/g or 6.25 g at 0.8 mg/g. Those are arithmetic examples, not a dose recommendation.
At 8.94 mg the salt disappears into a capsule fill, and the excipients dominate the formulation. At two to six grams the extract becomes the dosage form: it fits a stick pack, a powder for dispersion or a multi-capsule serving, but not a single small capsule. A dilution or granulation of the salt can make a small dose weighable on a production line, but it changes the specification and the label has to declare it.
The salt is the practical choice for a capsule, tablet or aqueous mix where the label declares spermidine. The free base is a different order, not a drop-in, and the extract is a different product concept rather than a stronger or weaker version of the salt.
What to write into the specification
- “Spermidine trihydrochloride, CAS 334-50-9 (free base CAS 124-20-9), fermentation-derived, ≥98.0% by HPLC with the detector named.”
- “Putrescine ≤0.5% by HPLC, with the method and the limit of quantification stated.”
- “Loss on drying ≤1.0%; particle size ≥95% through 80 mesh.”
- “Identification by HPLC retention and IR against a reference.”
- “Heavy metals and microbiology as listed; 1 kg foil pouch or 25 kg fiber drum.”
- “Source declaration: fermentation-derived, with the manufacturing description and the allergen statement.”
A specification that names the salt but not the source is incomplete for this product, because the source is part of the claim. A specification that names the source but omits the putrescine limit is incomplete too, because the profile is part of the grade. The certificate, label and purchase order should name the same form and use the same source wording.
The fermentation spermidine product page holds the catalog specification. The source and label comparison with wheat germ is on the level-four comparison, the certificate lines on the COA page, the market route on the compliance page, and the pure free base on the spermidine product page. Analytical methods are in the methods library. The release workflow is on the quality page.
In this document
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation