SAMe disulfate tosylate: MOQ, packaging and ordering
The minimum order for SAMe disulfate tosylate is one 1 kg foil pouch, and the production pack is a 25 kg fiber drum. Standard material ships in 1–7 days from confirmation. To quote firmly, we need the salt and both CAS numbers, the assay basis, the pack and quantity, the destination and Incoterm, the document set, and the market where the finished product will be sold.
The minimum is one kilogram because a lot has to be sampled, tested and traced before it can be scaled.
Why 1 kg is the minimum
A one-kilogram pouch is enough for a bench trial, a retention sample and a third-party check, and it stays one lot from packing to use. It also ships as a parcel, so a formulator can start before the production plan is fixed. The pouch has a lot code and a COA; the test sample and the material used in the trial can be the same article.
Smaller quantities are normally repacked from a larger lot, which adds a handling step and a new pack identity. The 25 kg drum lowers the handling per kilogram but ties up inventory for longer. It is also a single lot unit: one lot code, one certificate and one retained sample. The minimum is set by traceability, not by a volume target.
Pack sizes and variants
| Format | Net weight | Where it fits | Notes |
|---|---|---|---|
| Foil pouch | 1 kg | Trial work, samples, small runs | Foil barrier against moisture and light; reseal and keep dry once opened |
| Fiber drum | 25 kg | Routine production | Lined drum; one lot code on drum and liner |
| Granulated grade | On request | Flow and dust reduction | Its own specification; flow and bulk density differ |
The powder is the catalogue form. The pouch and drum are the standard packs; a granulated grade is a separate specification and can change the lead time. If the fill line needs a defined flow, raise it with the quotation, not after delivery.
The pack is also a stability barrier. SAMe takes up water, so the foil and the drum liner are part of the protection. Once a pouch is opened, folding it over does not restore a heat seal. Record the opening date.
Dispatch and transit
Standard material is quoted at 1–7 days after confirmation. Picking, paperwork and dispatch fall inside that window; freight transit, customs and the buyer's release do not. A granulation, a special pack or a market-specific document set takes longer and is quoted separately.
Get a dispatch date as well as a lead time. A pouch usually travels as a parcel, a drum on a pallet, and the Incoterm decides who books freight and clears entry. Documents should leave with the lot.
What a quote has to contain
Six points make a quote comparable:
- Material. SAMe disulfate tosylate, salt CAS 97540-22-2, parent CAS 29908-03-0.
- Specification. Assay as the salt, water, pH, related substances, metals and micro.
- Pack. 1 kg pouch, 25 kg drum, or granulated on request.
- Delivery. Destination, Incoterm and required date.
- Documents. COA, specification, SDS and any destination-specific declaration.
- Use and market. Supplement, food or something else, plus the country of sale.
A quote that omits the salt or the market is not complete. SAMe's regulatory route varies by market, so the route may change the documents. Commercial terms are not published on this page; they are on the quote.
A sample has to carry its lot code
A sample is only useful if it carries the lot code that will appear on the production pack. Test identity, assay, water, pH and micro before scaling, and retain part of the same pouch. If the trial needs less than a kilogram, ask first: a split is a repack and needs its own record. A bench sample and a later drum may not share a lot. For this salt, add the counter-ion check and the salt factor to the qualification panel; an assay figure alone will not tell you which salt the sample is.
Terms to settle before ordering
The quote covers commercial terms, Incoterm, pack, lead time and documents. Quality terms sit alongside: specification revision, COA per lot, retained sample, retest period and change control. A quality agreement before the first production order is easier than a dispute afterwards.
Return and replacement rules come from the quote and the quality agreement. If a lot fails the agreed specification, use the retained sample and a joint re-test rather than a photograph. Agree the referee laboratory and who pays before the problem arises. Write down who holds the retained sample and for how long, and attach the specification revision to the quality agreement.
The product hub carries the catalogue specification; the COA page walks through the release tests; the compliance page handles the market file; the salt-forms page explains why the salt must be named on the order; the glossary entry for MOQ explains the term; the logistics page deals with freight and paperwork. The NAD+ page is a parallel case, the HPLC method note covers the assay, and the quality page covers release.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation