SAMe grades: the salt form is the specification
SAMe is sold as a salt, not as the free base, and the salt is the grade. The catalogue grade is SAMe disulfate tosylate, salt CAS 97540-22-2, specified at ≥97.0% by HPLC as the salt. SAMe 1,4-butanedisulfonate, CAS 101020-79-5, is a different salt with a different formula weight per SAMe unit, a different counter-ion and a different label name. The two share the same SAMe parent; they do not share a specification.
SAMe is bought as a salt, and the salt decides the CAS number, the mass per gram of SAMe and the name on the label.
Why the sale form is a salt
SAMe is a sulfonium compound: the sulfur carries a positive charge and the molecule behaves as a zwitterion. The free base is hygroscopic and degrades readily, so it is not the commercial article. Salt formation gives a solid with a defined counter-ion, a defined formula weight and a handling profile that can be specified, packed and shipped.
The disulfate tosylate is the grade in this catalogue. It pairs SAMe with tosylate and sulfate counter-ions and gives a white to off-white powder that dissolves freely in water to an acidic solution. The butanedisulfonate is the other salt a buyer is likely to meet; it has its own history and its own specification. Both are SAMe salts, and neither is “SAMe” in the abstract.
The two salt forms side by side
| Property | Disulfate tosylate | Butanedisulfonate |
|---|---|---|
| Salt CAS number | 97540-22-2 | 101020-79-5 |
| SAMe parent | CAS 29908-03-0; C15H22N6O5S; 398.44 | Same parent |
| Salt formula | C22H34N6O16S4 | C15H23N6O5S·C4H9O6S2·0.5 C4H10O6S2 |
| Formula weight per SAMe unit | 766.80 | 725.80 |
| SAMe content | About 52.0% by mass | About 54.9% by mass |
| Counter-ion | Tosylate and sulfate | 1,4-Butanedisulfonate |
| Assay in this catalogue | ≥97.0% by HPLC, as the salt | Separate specification |
| Water and pH | Water ≤5.0%; pH 2.0–4.0 at 5% | Set in its own specification |
| Label name | S-Adenosyl-L-methionine disulfate tosylate | S-Adenosyl-L-methionine 1,4-butanedisulfonate |
The formula weight row is the one that changes the arithmetic. A gram of the disulfate tosylate contains less SAMe than a gram of the butanedisulfonate, because the first salt carries a heavier counter-ion load. The assay percentage does not cancel that difference, because both assays are expressed as their own salt.
Powder, solution and handling
The catalogue form is a white to off-white, free-flowing powder. It dissolves freely in water, and the solution is acidic: the 5% solution is specified at pH 2.0–4.0. That acidity comes from the counter-ions and is part of the material, not a defect. A formulator who neutralises the solution changes the stability of the SAMe at the same time as the taste.
The powder is hygroscopic. Water is specified at ≤5.0%, and the pack is the barrier: a 1 kg foil pouch for trial and small-batch work, a 25 kg fiber drum for production. A granulated variant is available on request and is a separate specification, because granulation changes flow and bulk density. The catalogue sets no particle-size band; if a fill system needs one, it is agreed as a line in the specification rather than assumed from the powder photograph.
Dose arithmetic and the dosage form
The label dose and the weigh-up use different units. A label that declares 400 mg of SAMe needs 400 ÷ 0.5196 = 770 mg of the pure disulfate tosylate salt, or about 794 mg of a 97.0% powder. The same 400 mg expressed as butanedisulfonate would need about 729 mg of the pure salt, or about 751 mg at a 97.0% salt assay. These figures are arithmetic, not a dose recommendation; the label and the finished-product file set the dose.
The salt is freely soluble, so capsules, tablets and stick packs all take it. A tablet adds compression heat and a coating step; a stick pack adds an acidic taste and a seal that must survive the fill. A drink mix has the most variables: pH, water activity, heat load and hold time all act on the same molecule. The dosage form is a stability decision as well as a marketing one.
The granulated variant is the practical answer when dust or flow is the problem. It is not a dilution and it is not a different salt; it is the same salt with a different particle build, and the assay, water and pH lines still apply.
What belongs in the SAMe specification
- “S-Adenosyl-L-methionine disulfate tosylate, salt CAS 97540-22-2; SAMe CAS 29908-03-0, C15H22N6O5S, 398.44; salt C22H34N6O16S4, 766.80.”
- “Assay ≥97.0% by HPLC, expressed as the salt; state the water result and the basis beside it.”
- “Water ≤5.0% by Karl Fischer; pH 2.0–4.0 at 5% in water.”
- “Identity by HPLC retention and UV scan; counter-ion identity for sulfate and tosylate.”
- “Heavy metals Pb ≤3, As ≤2, Cd ≤1, Hg ≤0.1 mg/kg; microbiology as listed.”
- “Related substances, including methylthioadenosine, against agreed limits.”
- “Pack, storage condition, destination market and salt name settled before ordering.”
When switching salt is the wrong move
If the label or the market file names the butanedisulfonate, the disulfate tosylate is not a drop-in. The declared ingredient, the mass per serving and the citation all belong to the other salt, and a switch made at the balance creates a label error that the assay cannot detect. The reverse is equally true.
Salt switching is a change control, not a purchasing shortcut. It calls for a fresh specification, certificate and label review, plus a stability check in the finished matrix. The product hub carries the catalogue specification; the salt-forms comparison goes deeper on mass and label; the COA page shows where the salt is reported; the stability page covers the storage limits; the compliance page covers the route. The NAD+ page is a useful parallel for another specialty ingredient with more than one sale form, the HPLC method note describes the assay, and the quality page covers release and retained samples.
In this document
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation