06 Identity & adulteration

How we prove a SAMe lot is the disulfate tosylate salt

Technical document 06 · Reviewed 2026-11-19 · SAMe

On this page
  1. Four layers of identity evidence
  2. The salt factor and the counter-ion ratio
  3. What X-ray diffraction can and cannot show
  4. How substitution shows up
  5. Identity lines for the specification
  6. Questions to put to the supplier

A SAMe lot can be called the disulfate tosylate salt only when four results line up: the paperwork names the salt and both CAS numbers; HPLC retention and UV match SAMe; sulfate and tosylate are both present; and the salt factor plus the water result explain the mass balance. The assay alone cannot prove the salt. A 97.0% result is consistent with several materials, and only the counter-ion evidence separates them.

In one line

Identity is the agreement of four measurements: the adenine chromophore, the salt factor, the two counter-ions and the water balance.

Four layers of identity evidence

A certificate can carry the right name and still fail to prove the powder. Each of the four layers asks a different question and needs its own evidence. Answering only the first layer describes a label, not a powder.

Four layers of SAMe disulfate tosylate identity
LayerWhat is askedEvidenceWhat it establishes
DocumentIs the salt named?Name, salt CAS 97540-22-2, parent CAS 29908-03-0Paperwork only
ChromatographyIs the peak SAMe?HPLC retention time plus UV scanThe SAMe molecule, not the salt
Counter-ionAre sulfate and tosylate present?Ion chromatography for sulfate; HPLC for tosylateThe salt form
Mass balanceIs it diluted or wet?Assay as the salt, water, related substancesConsistency of the numbers

No single layer is enough. The chromatogram shows the adenine ring but not the counter-ion. The counter-ion shows the salt but not the purity. The mass balance shows consistency but not which salt was intended. Read together, they answer the question that the label asks.

The salt factor and the counter-ion ratio

The disulfate tosylate has a formula weight of 766.80 per SAMe unit, and the SAMe parent is 398.44. The salt factor is 398.44 ÷ 766.80 = 0.5196. A 100% salt contains about 52.0% SAMe; a 97.0% salt contains about 50.4%. That factor is the bridge between the certificate and the label, and it belongs in the identity file because it fixes what the percentage means.

The counter-ion ratio is a second, independent check. The formula C22H34N6O16S4 contains one tosylate and two sulfate groups per SAMe unit. On a mass basis that is about 22.5% tosylate and about 25.6% sulfate, expressed as the acids. A lot with the right SAMe peak but a low tosylate figure is not this salt, even if the assay rounds to 97.0%.

The ratio is a stoichiometry check, not a purity test. Residual moisture, a diluent or a different salt all move it. Ion chromatography gives the sulfate figure; HPLC with UV detection gives the tosylate figure. Ask for both, and ask for the method and the standard used to calculate them.

What X-ray diffraction can and cannot show

X-ray diffraction asks whether the solid is crystalline and whether the pattern matches a reference. A SAMe salt that has been freeze-dried, spray-dried or milled may be amorphous or partly crystalline, depending on isolation and drying. The pattern is a fingerprint of the isolation process and can reveal a crystalline diluent; it is not an identity test on its own.

XRD cannot prove the counter-ion ratio, and it cannot separate two amorphous solids. Ask for the reference pattern, the preparation method and the detection limit before accepting a “match”. In a dispute, the chromatogram, the counter-ion results and the mass balance carry more weight than a diffraction trace without a reference.

How substitution shows up

Common SAMe substitutions and the signals
SubstitutionWhat it doesSignalTest
Diluent, such as maltodextrin or an amino acidLowers the salt assay; changes the water result and the colourAssay low; mass balance shortHPLC, water, mass balance
Butanedisulfonate sold as tosylateDifferent counter-ion and formula weightTosylate absent or low; sulfate ratio wrongCounter-ion methods, salt factor
Sulfate-only saltNo tosylateTosylate absentHPLC for tosylate
MethylthioadenosineDegradation product; lowers SAMeExtra peak near SAMeRelated-substance HPLC
WaterRaises water; lowers the as-is assayWater high; dry-basis assay normalKarl Fischer

Colour is a weak signal: white to off-white covers a wide range, and a diluent can preserve it. The stronger signals are the counter-ion results and the mass balance. If the certificate covers appearance and assay but says nothing about counter-ions, the most likely substitution remains untested.

Identity lines for the specification

  • “S-Adenosyl-L-methionine disulfate tosylate, salt CAS 97540-22-2; SAMe CAS 29908-03-0; C22H34N6O16S4; formula weight 766.80.”
  • “Assay ≥97.0% by HPLC as the salt; report water and the assay basis.”
  • “Identity by HPLC retention and UV; attach the chromatogram.”
  • “Counter-ion identity: sulfate by ion chromatography, tosylate by HPLC, with the ratio stated.”
  • “Water ≤5.0%; pH 2.0–4.0 at 5%; related substances including methylthioadenosine against agreed limits.”
  • “No other SAMe salt or diluent above the agreed limit.”
  • “Destination market and salt name settled before ordering.”

Questions to put to the supplier

  1. Which salt is this lot, and are both the salt CAS and the parent CAS on the certificate?
  2. Will you send the chromatogram and UV spectrum, not just the assay figure?
  3. What are the sulfate and tosylate results, and which methods produced them?
  4. What is the water result, and how was the assay converted to the salt basis?
  5. If we disagree about a lot, will you re-test the retained sample jointly?

Those five answers together form an identity file; a single assay figure does not. The product hub carries the catalogue specification; the COA page maps each figure to its certificate line; the salt-forms page compares the two salts; the stability page covers the storage limits; the HPLC method note sets out the separation, and the quality page covers the retained sample. The NAD+ page is a parallel case of one name covering two sale forms.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation