03 Stability

NADH stability: oxidation, water and the pack

Technical document 03 · Reviewed 2026-11-20 · NADH

On this page
  1. The solid: water first, then oxidation
  2. The solution: oxygen, light and pH
  3. What drives the loss
  4. Designing the study
  5. How the finished formula changes the answer
  6. How the shelf life is set

NADH has two ways to fail: the powder absorbs water, and the reduced ring is oxidised back to NAD+ wherever oxygen reaches it. Light, heat and trace metals speed the second route, and a solution is the most exposed format of all. The useful shelf life is therefore a property of the pack and the storage condition attached to it.

In one line

NADH fails by water uptake and by oxidation, and a pack that excludes both is the only basis for a retest period.

The solid: water first, then oxidation

The certificate limit for loss on drying is ≤8.0%, and storage adds to it. NADH is hygroscopic: a pouch that has been opened and folded closed still exchanges air with the room, so the next loss-on-drying result is likely to be higher. Caking, lumps and slower flow follow, and an 80 mesh powder has plenty of surface for the change.

Oxidation runs alongside. Oxygen at the particle surface converts NADH to NAD+, and the reaction is fastest where the powder is spread thin or left exposed. A 260 nm total-dinucleotide assay can miss this because it counts both forms; the 340 nm result is the one that falls.

Keep light and heat out as well. Published handling data for the pure solid often call for −20 °C, a desiccant and protection from light; a commercial pack needs its own agreed condition, backed by data. Let a cold pack equilibrate before opening it, or condensation will form on the powder.

The solution: oxygen, light and pH

Dissolved NADH reacts with dissolved oxygen. Light, heat and trace metal ions increase the rate, and the matrix pH changes it; NADH is acid-labile, which is the opposite of the oxidised form's preference for mildly acidic solutions. A low-pH drink is a difficult home for the reduced coenzyme before any heat process is added.

Hot fill and pasteurisation add heat, and often oxygen exposure. A stick pack keeps the powder dry until the consumer adds water, so it avoids the problem at the cost of a seal that has to stay intact. Where a liquid is unavoidable, deoxygenate, control pH, use an opaque bottle and measure the hold time in the finished matrix.

Appearance is a poor guide. A pale yellow solution can already have lost reduced content, and a darker one may contain only a little oxidised material. Measure at 340 nm rather than judging by eye.

What drives the loss

Factors that move NADH during storage
FactorWhat it doesControl
OxygenConverts NADH back to NAD+Low headspace; sealed pack; deoxygenated process
WaterRaises loss on drying; lowers the as-is assayFoil pack; desiccant; reseal after opening
LightSpeeds oxidation and colour changeOpaque pack; dark store
HeatSpeeds oxidation and hydrolysisCool store; cool process
pHNADH is acid-labile; pH changes the ratesValidate the matrix pH; buffer if needed
Trace metalsCatalyse the oxidationAvoid iron and copper contact

The factors combine. A warm, bright, humid store is worse than three separate effects added together, and an aerated acidic drink brings most of them into one bottle. The question is not whether NADH is stable, but how long it stays within specification in a named pack and condition.

Designing the study

Match the study to the pack and the matrix. A warehouse arm at 25 °C/60% RH, an intermediate arm at 30 °C/65% RH and an accelerated arm at 40 °C/75% RH cover the usual bulk-storage question. Add a light-exposure arm, because a dark chamber cannot expose a photolytic route.

Test assay at 340 nm, related substances at 260 nm, loss on drying, appearance, sodium where the form is claimed and microbiology at every point. The 260 nm profile is the only one that sees NAD+ and the related nucleotides.

The report should give individual results, name the pack, the lot family and the condition, and not reduce everything to a pass statement. Data from a different pack is not a substitute for the pack on order.

How the finished formula changes the answer

Capsules and tablets have low water activity, but the shell and the excipients can still pass moisture into the fill; test loss on drying and appearance at release and after storage. A stick pack lives or dies by its seal, so inspect the strip for pinholes as well as testing the powder.

A beverage brings water, oxygen, heat, light and pH together. Bulk powder data is the starting point, not the answer. An overage is a formulation and label choice; it cannot compensate for a pack that admits oxygen.

No finished format inherits the bulk pack's retest period. Headspace, opening history and the barrier in front of the powder all differ.

How the shelf life is set

There is no single shelf-life figure for NADH. The retest period belongs to a named pack, a named storage condition and a named test panel, and it should appear in the specification with the supporting data. A bare number is a claim.

At the end of the period, re-test the retained sample at 340 nm and re-check loss on drying before extending use. Do not extend on assumption and do not apply a drum result to a pouch. The two packs differ in headspace, surface-to-volume ratio and how often they are opened.

Standard packs are listed on the NADH product page; release tests are on the COA page; pack and lead time are on the MOQ page; the assay is described in the HPLC method note; and the release workflow is on the quality page.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation