NADH: MOQ, packaging and ordering
NADH is quoted from a 1 kg foil pouch, with the 25 kg fiber drum reserved for production volumes. The standard pack is dispatched 1–7 days after order confirmation. A firm offer needs the reduced disodium salt named with CAS 606-68-8, the assay basis and its 340 nm wavelength, the pack and quantity, the destination and Incoterm, the document set, and the market where the powder will be sold.
A kilogram is the smallest sealed unit that can carry its own lot code; the drum is a production pack, not a different material.
Why the minimum is 1 kg
The pouch is the unit of traceability. Its kilogram covers a bench trial, a retained sample and an identity check by an outside laboratory, and it moves as a parcel without a pallet. Filling and labelling happen under one lot code, so the certificate, the pack and the retained portion can be matched. Anything smaller is a split from a larger lot, carrying extra handling and a thinner link to the original pack.
The drum answers a different problem. It cuts handling per kilogram but asks the buyer to hold an oxidation-sensitive powder for longer. Order against consumption: a drum opened repeatedly over months exposes the material to air each time, and the handling saving can be lost in re-testing. The pack decision is a storage decision as much as a commercial one.
Packs and formats
| Pack | Net weight | Typical use | Notes |
|---|---|---|---|
| Foil pouch | 1 kg | Trial, samples, small runs | Foil barrier; close it again after use |
| Fiber drum | 25 kg | Production | Liner inside; lot code on both |
| Granulated powder | On request | Dust and flow control | New mesh line; quoted separately |
The standard material is milled to 80 mesh (≥95% passing). Granulation is a separate presentation with a new particle-size line; it is quoted as a change, not selected from a packing list. Tell the supplier before the quotation if the fill line needs a coarser or freer powder, because the extra step can extend the dispatch window.
Lead time and dispatch
Order confirmation starts a 1–7 day dispatch window for the standard pack. Picking, documentation and hand-over to the carrier sit inside that window; transport, customs and the customer's own release sit outside it. A granulated lot or a special pack is quoted with its own timing.
Ask for the dispatch date in writing rather than relying on the range. The pouch moves as a parcel and the drum as a pallet, and the Incoterm fixes who books and pays for each leg. Send the lot documents with the material, not after it, so the receiving laboratory can release the pack without chasing paperwork.
Prepare the store before delivery. The pack needs a dry, dark, cool position, and a drum needs room to keep the liner closed between withdrawals.
What a quotation needs
A comparable quotation answers six questions: which form (reduced disodium salt, CAS 606-68-8); which specification revision, with the assay basis and 340 nm wavelength; which quantity and pack; which destination and Incoterm; which documents (COA, specification, SDS and market statements); and which intended use and market. When one of the six is missing, the offers are not yet comparable.
The market answer matters because the same lot can be acceptable in one destination and outside the file in another. The form answer matters because an offer for NAD+ is not an offer for NADH. Commercial terms are not published on this page; they belong on the quotation.
The sample is a lot, not a demonstration
The pouch doubles as the qualification sample. Run identity (HPLC retention and UV at 259 and 340 nm), assay, loss on drying, sodium and microbiology on it, then keep a retained portion from the same pack. Record the lot code on the sample, the certificate and the quotation; if the three do not match, the exercise has tested a different material from the one on order.
A sub-kilogram bench request is a repack. It leaves the original lot, acquires a handling record of its own and should not be described as the catalog pouch. Ask for the split in writing and file its code with the trial data.
Store the sample under the same conditions intended for production. A clear jar on a windowsill is not a fair proxy for a foil pouch in a dark store.
Terms to settle before the first order
Put the commercial and quality terms on one page before the first production order: Incoterm, pack, dispatch window, specification revision, one COA per lot, retained sample, retest period and the change-notification route. A quality agreement signed at this stage is easier than a dispute later.
If a lot is disputed, the case rests on the retained sample and a joint re-test by the named method. Name the referee laboratory and the party who pays for it before the first order, not after a disagreement. A return argued from a photograph of the drum is hard to settle for either side.
Catalog values are on the NADH product page; release tests on the COA page; the market file on the compliance page; the term itself in the MOQ glossary; and shipping documents on the logistics page.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation