L-carnosine grades: powder, granulation and the name on the label
The catalog material is L-carnosine: a white, freely soluble powder, 98.0–101.0% by HPLC, rotation +20.0° to +22.0° on the dry basis, moisture ≤1.0%. Three other offers sit near it in a catalogue: a granulated version of the same powder, a diluted blend, and zinc-carnosine. The first two are the same molecule; the first is the standard grade, the second a handling variant, and zinc-carnosine is a different substance.
There is one catalog grade of L-carnosine; granulation changes handling, a dilution changes the label, and zinc-carnosine is a different material rather than a stronger grade.
Why the name needs a form behind it
Carnosine is a dipeptide, and the name is often used without a form. A buyer can be offered a fine powder, a granule, a blend carrying a carnosine number, or the zinc chelate, all under a short label. The specification has to name L-carnosine, CAS 305-84-0, and the physical form; the CAS number is the quickest way to keep the four apart.
Purity is not the axis that separates them. The catalog material has one assay range. What changes across the offers is the handling behaviour, the mass of carnosine per gram, or the molecule itself.
The forms side by side
| Form | CAS | Assay | Typical use |
|---|---|---|---|
| L-carnosine powder | 305-84-0 | 98.0–101.0% by HPLC | Capsules, tablets, powder blends |
| Granulated L-carnosine | 305-84-0 | Same range; own particle profile | Flow and dust control |
| Diluted L-carnosine | 305-84-0 plus carrier | Lower assay per gram | Low-dose blends; carrier declared |
| Zinc-carnosine | 107667-60-7 | Carnosine moiety plus elemental zinc | Separate material and file |
Rows one and two share a CAS number and differ only in how the particles are built. Row three shares the CAS number of the dipeptide but adds a carrier, so the assay per gram falls and the label gains an ingredient. Row four is a chelate with its own CAS number, its own formula and a zinc figure; the level-four comparison works through the assay and label consequences.
Solubility and flow
L-carnosine dissolves freely in water and is hygroscopic as a solid. A fine powder therefore needs a dry room and a sealed container; a granule presents less surface and flows more steadily, which is why a capsule line may prefer it. Granulation changes bulk density, dust and sometimes the rate at which the powder dissolves. None of those changes the assay or the rotation.
Particle size should be written into the specification when it matters. The catalog does not promise a single mesh; the buyer states the range that the filling machine or the blend can tolerate, and the supplier confirms it before the order. Bulk density is the other practical figure: it decides how much powder a capsule or a scoop holds, and it changes when the powder is granulated. Ask for the bulk density range when the fill weight is tight.
The dosage form and the declared ingredient
A capsule or tablet uses the powder or granulate at a fill weight calculated from the carnosine content. A granulated grade can need a different fill weight for the same carnosine content, because the granule packs differently from the fine powder. A stick pack or powder blend uses the powder because it dissolves. A diluted grade is useful when the dose per unit is small, but the carrier is now part of the formula and has to be declared.
The label is the constraint that decides most of these cases. L-carnosine is the ingredient name; a carrier is a second ingredient; zinc-carnosine is a different name and brings a zinc figure with it. A change of form that moves any of those three is a label change.
What to write into the specification
- “L-carnosine, CAS 305-84-0, C9H14N4O3, molecular weight 226.23.”
- “Assay 98.0–101.0% by HPLC; state the basis on the certificate.”
- “Specific rotation +20.0° to +22.0° on the dry basis; state temperature, solvent and concentration.”
- “Loss on drying ≤1.0%; heavy metals and microbiology as listed.”
- “Particle profile and bulk density agreed for the dosage form, where the powder is granulated.”
- “Carrier and assay per gram stated where the material is diluted.”
- “Zinc below the agreed limit, to exclude zinc-carnosine.”
When a different form is the wrong purchase
A granulated powder that dissolves slowly can leave haze in a clear drink; test it in the vehicle before the production run. A diluted grade cannot sit behind a label that declares pure L-carnosine. Zinc-carnosine cannot fill a carnosine line at all, because the declared substance and the zinc load both change.
Conversely, L-carnosine cannot replace the chelate where the chelate is the named ingredient. The two purchases are separate, and the comparison page sets out the arithmetic. The product page has the catalog data; the glutathione range shows another ingredient whose forms are separate specifications; the HPLC note covers the assay; the quality page covers release.
In this document
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation