What the COA for L-carnosine actually contains
An L-carnosine certificate has to do two jobs at once: quantify the dipeptide and prove its optical form. The assay range is 98.0–101.0% by HPLC; specific rotation is +20.0° to +22.0° on the dry basis; loss on drying is ≤1.0%; and the heavy-metal and microbiology panels sit beside them. The release limit belongs in one column and the measured result in another. The catalog limits below are the specification; a lot is released against the certificate for that pack.
The assay says how much carnosine is present; the rotation and the loss on drying say whether it is the L-form the label names.
What each line has to show
A useful certificate is read from left to right: parameter, method, limit, result. Each line should stand on its own, so a reviewer can check the method and the gate without asking for a second document. A line that offers only “conforms” removes the evidence and leaves the conclusion.
Two rows carry the identity argument. IR and HPLC establish that the substance is the carnosine dipeptide. Polarimetry establishes which enantiomer it is. The assay then puts a number on the content.
| Parameter | Method | Release limit |
|---|---|---|
| Appearance | Visual | White powder |
| Identification | IR and HPLC | Conforms to the reference |
| Assay | HPLC | 98.0–101.0% |
| Specific rotation | Polarimetry, calculated on the dry basis | +20.0° to +22.0° |
| Loss on drying | Gravimetric | ≤1.0% |
| Elemental impurities | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg |
| Microbial limits | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent |
The three numbers that depend on moisture
The assay range of 98.0–101.0% is measured by HPLC. The certificate should say whether the percentage is calculated on the powder as received or after the loss on drying has been subtracted. At a moisture limit of 1.0% the gap is small, but small is not zero, and a specification that does not name the basis invites two laboratories to report different numbers for the same lot.
The rotation is different: it is defined on the dry basis, so the laboratory has to dry the sample or correct for the measured moisture before reporting the angle. Temperature, solvent, concentration and cell length should be printed with the result. Without them the angle cannot be reproduced or compared with the +20.0° to +22.0° window.
HPLC needs its own description: column, mobile phase, wavelength and standard. Carnosine absorbs in the short ultraviolet rather than the visible range, so the detection wavelength and the reference standard are substantive parts of the method, not footnotes. IR adds a second identity dimension through the amide and imidazole bands.
Limit, result and the difference between them
The limit is a boundary; the result is a measurement. When the result column repeats the limit, the certificate has told the reader nothing about the lot. A proper page shows a number for each parameter and a method beside it.
| Parameter | Release limit | Result column |
|---|---|---|
| Assay | 98.0–101.0% by HPLC | A measured percentage, with the basis and the standard |
| Specific rotation | +20.0° to +22.0° dry basis | A measured angle, with temperature, solvent and concentration |
| Loss on drying | ≤1.0% | A measured percentage |
| Elemental impurities | Per element | The measured mg/kg figure for each element |
| Microbial limits | Counts and absence | The plate count and the absence result |
A single “passes” statement collapses five separate checks into one sentence. The reviewer cannot see whether the lead result sat close to its limit, whether the rotation was near the bottom of its window, or whether the moisture was 0.2% or 0.9%.
Where lots move
Different crystallisation and drying conditions shift the moisture, the colour and occasionally the feel of the powder. Milling changes bulk density and flow but not the molecule. Hydrolysis raises the free histidine peak and pulls the assay down; racemisation pulls the rotation down while the achiral assay can stay inside its range. The assay and the chromatogram show the first; the polarimeter shows the second.
Watch the direction of travel across several lots. A rotation that has fallen from +21.5° to +20.2° is still inside the window, but the trend is worth a question. The same applies to a moisture result that has doubled while remaining below 1.0%.
When the in-house certificate is not enough
A new source, a first entry into a regulated market, an edge-of-window rotation or a disputed result are the four occasions for an outside laboratory. The panel should be built around the question, not copied from the certificate: HPLC assay and identity, polarimetry with the conditions recorded, moisture, ICP-MS for the four heavy metals, and the micro suite.
Add zinc by ICP-OES when the identity is in doubt. The L-carnosine molecule contains no zinc; zinc-carnosine is about 22.6% zinc. A trace result is unremarkable; a figure near the chelate's theoretical value changes the conversation from purity to material identity.
Ask for the detection limit behind every “not detected” entry. A method that cannot see 0.5 mg/kg cannot support a statement about 0.1 mg/kg. Retain the sample that was tested, and record the lot code on the report.
A like-for-like comparison
Compare six fields: name and CAS; assay with its basis; rotation with its conditions; moisture; contaminants and micro; pack and lot. Two offers that match on assay but not on rotation or moisture are not the same material, even when both are called L-carnosine.
Traceability is the second pass. Who made the lot, by which route, and with which drying and milling steps? The answers belong in the file. The specification is summarised on the carnosine product page; the analytical argument is on the identity page; the destination documents are on the compliance page; the chromatographic method is in the HPLC note; the release sequence is described on the quality page.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation