04 MOQ & ordering

L-carnosine: MOQ, packaging and ordering

Technical document 04 · Reviewed 2026-11-19 · Carnosine

On this page
  1. Why the first pack is 1 kg
  2. Packs and formats
  3. From confirmation to dispatch
  4. Six details for a comparable quotation
  5. A sample with a lot code
  6. The quality terms beside the commercial ones

The minimum order for L-carnosine is a single 1 kg foil pouch; production usually moves to a 25 kg fiber drum. Standard lead time is 1–7 days. A quotation can be firm only when it names the material and CAS number, the specification, the pack and quantity, the destination and Incoterm, the documents and the market where the product will be sold.

In one line

The 1 kg pouch is our smallest commercial unit: one lot code, one retained sample and one COA, with enough powder to run a trial.

Why the first pack is 1 kg

One kilogram is enough for a bench trial, a retained sample and an independent check, and it travels as a parcel rather than a pallet. Those three uses are the reason the pack exists: a trial without a retained sample cannot be defended later, and a sample without a lot code is only a demonstration.

Smaller quantities come from splitting a larger lot. Splitting adds a repack step, breaks the original pack identity and makes the chain from drum to sample harder to document. At the other end, the 25 kg drum lowers handling per kilogram but ties up inventory and storage time. The minimum follows the pack, not the order size.

Packs and formats

Standard L-carnosine packs
PackNet weightWhere it fitsNotes
Foil pouch1 kgTrials, samples and small batchesMoisture barrier; close it properly after sampling
Fiber drum25 kgProductionLined drum; lot marked on drum and liner
Granulated powderOn requestHandling and flowCoarser, freer-flowing particles
Diluted powderOn requestLow dose per gramCarrier appears on the label

The powder is hygroscopic, so the pack has to be read as part of the specification. The foil pouch is the moisture barrier and its seal is the weakest point; a rolled-down top is not a seal. The drum depends on the inner liner, and the liner should be closed after each withdrawal. A desiccant is useful in a humid room but does not replace a closed pack.

From confirmation to dispatch

The 1–7 day window covers picking, paperwork and handover to the carrier. Transit, customs and the customer's own release sit outside it. A granulation, a dilution or a special pack is a separate line on the quotation and usually a longer date.

Ask for the dispatch date as well as the lead time. The trade term assigns the freight booking and the customs entry; the packing list, COA and other documents belong on the same shipment as the lot. A document that arrives after the drum delays the release.

Six details for a comparable quotation

These are the fields that make two offers comparable:

  1. The material. L-carnosine, CAS 305-84-0 and the physical form, written out; zinc-carnosine is a separate order.
  2. The specification. Assay with its basis, rotation, moisture, metals and micro.
  3. Amount and pack. A 1 kg pouch, a 25 kg drum, or a granulated or diluted grade.
  4. Destination and trade term. Where it is going, and which Incoterm assigns freight and entry.
  5. Paperwork. COA, specification, SDS and any market statement the importer needs.
  6. Use and market. What the material is for, and where the finished product will be sold.

Without the market and the material name, two quotations cannot be compared. The same powder may fit one destination and not another. Commercial terms are not published here; they are set out in the quotation.

A sample with a lot code

Qualification starts with the 1 kg pouch. Test identity, assay, rotation, moisture and micro before scale-up, and keep part of the same pack as the retained sample. The lot code on the pouch, the certificate and the quotation should agree.

A bench quantity split from bulk is a repack, not the catalog pack. If that is what the project needs, say so before the order and document the split. Do not assume the bench sample and the production drum share a lot.

The quality terms beside the commercial ones

The quotation fixes the commercial side: pack, lead time and paperwork. The quality agreement covers the specification revision, the certificate for each lot, the sample kept back, the retest period and how changes are handled. It is easier to agree those before the first production order than after a disputed result.

If a lot fails the agreed specification, the retained sample and a joint re-test are the evidence. Agree in advance which laboratory is acceptable to both sides and who commissions the referee test.

The product page holds the catalog data; the COA page walks through the release tests; the compliance page sets out the market documents; the MOQ glossary explains the abbreviation; shipping sits on the logistics page; the quality page covers release and change control.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation