Carnosine vs zinc-carnosine: the chelate, the assay and the label
L-carnosine (CAS 305-84-0) is the free dipeptide. Zinc-carnosine (CAS 107667-60-7) is a 1:1 chelate in which one zinc ion is bound to one carnosine unit. The formulas differ, the molecular weights differ, and the chelate is about 22.6% zinc and 77.4% carnosine equivalent by mass. An assay, a dose or a label written for one material does not carry over to the other.
Zinc-carnosine is a different molecule: 100 mg of the chelate carries about 77 mg of carnosine and 22.6 mg of zinc, and neither the assay nor the label transfers.
What the chelate actually is
Carnosine is β-alanyl-L-histidine, C9H14N4O3, molecular weight 226.23. To form the chelate, the dipeptide gives up two protons and coordinates a zinc ion; the resulting formula is C9H12N4O3Zn and the molecular weight is 289.59. The material is also known as polaprezinc. The zinc is held by the dipeptide, not blended alongside it, and that is what the word chelate is doing in the name.
The two-proton difference looks minor on paper and is not minor in a specification. It explains why the carnosine share of the chelate is 77.4% rather than 100%, and why the two materials have different CAS numbers, different certificate lines and different names for the label. A purchase order that says only “carnosine” has not selected either material.
Two assays, not one number with a zinc footnote
The free dipeptide is described by three lines: assay 98.0–101.0% by HPLC, specific rotation +20.0° to +22.0° on the dry basis, and loss on drying ≤1.0%. Together they say how much carnosine is present and that it is the L-form.
The chelate needs a carnosine-moiety assay and an elemental zinc assay, each with its own method. A chelate can dissociate on an HPLC column, so a result read against a carnosine standard measures the dipeptide moiety rather than the whole complex as weighed. The certificate should name the standard and state whether the assay is calculated on the dried basis.
Zinc is normally measured by ICP-OES or atomic absorption. The theoretical value is 22.6%; a result near that figure, with a moiety assay that closes the mass balance, is consistent with the chelate. A certificate that reports a carnosine figure close to 100% and no zinc has described only part of the molecule. The rotation belongs to the L-carnosine specification and cannot stand in for the zinc result.
The mass arithmetic and the zinc load
One mole of chelate carries one mole of zinc and one mole of the carnosine moiety, so the split follows the formula: 65.38 ÷ 289.59 = 22.6% zinc, with the remaining 77.4% counted as carnosine equivalent. That is arithmetic for a label and a weigh-up, not a suggested intake.
| Material and quantity | Carnosine equivalent | Zinc |
|---|---|---|
| 100 mg L-carnosine | 100 mg | None added |
| 100 mg zinc-carnosine | 77.4 mg | 22.6 mg |
| 25.8 mg zinc-carnosine | 20.0 mg | 5.8 mg |
The third row is the one that matters when a formula changes. If the label says 20 mg carnosine and the source is the chelate, the weigh-up is 25.8 mg, and 5.8 mg of zinc arrives with it. In the EU the reference intake for zinc is 10 mg/day under Regulation (EU) No 1169/2011, so that single switch supplies more than half the reference intake before any other zinc in the formula is counted. The buyer's regulatory team confirms how the zinc is declared and whether the daily amount fits the destination rules.
The label cannot be swapped
The declared ingredient name is the material. “L-carnosine” and “zinc-carnosine” are two names for two substances, and one does not satisfy a label written around the other. Moving a formula from the dipeptide to the chelate changes the ingredient name, the quantity per serving and the zinc contribution at the same time.
The reverse move is equally wrong. Replacing 20 mg of zinc-carnosine with 20 mg of L-carnosine removes about 4.5 mg of zinc and changes the declared ingredient. The label, the specification and the lot certificate have to name the same material, and the zinc figure belongs on the label wherever the chelate is the source.
Claims follow the name as well. A structure or function wording assessed for one material is not automatically available for the other, because the ingredient and its zinc content have changed. No disease-related claim is made here for either material; the wording is reviewed for the destination before use.
Two materials, two regulatory files
A regulatory file belongs to a material, not to a family name. Paperwork assembled for L-carnosine does not establish the route for zinc-carnosine, and a file for the chelate does not cover the free dipeptide. Some markets have a product-specific entry for one form and not the other; the current text and its conditions have to be checked for the destination rather than inferred from the shared word in the name.
The buyer's regulatory team confirms the route, the permitted use and the label for the market where the finished product will be sold. The supplier's part is the specification, the lot certificate, the safety data sheet and the change-control record for the material actually shipped.
When each material is the right purchase
Choose L-carnosine when the label names carnosine and the dosage form is a capsule, tablet or powder blend built on the dipeptide. Choose zinc-carnosine when the chelate is the named ingredient and the zinc is intended, and specify the carnosine-moiety assay and the zinc assay together. Neither is a substitute for the other, and the simplest safeguard is to put the CAS number on the purchase order.
The carnosine product page carries the L-carnosine specification; the grades page covers the powder and granulated forms; the identity page sets out the tests that tell the two materials apart; the compliance page lists the documents; the glutathione range is a second example of a specialty ingredient whose forms are separate specifications.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation