02.1 R-ALA vs racemic

R-alpha-lipoic acid or racemic: the optical form and the label

Technical document 02.1 · Reviewed 2026-11-19 · Alpha-Lipoic Acid

On this page
  1. Two CAS numbers, one molecule
  2. What the optical form means on a specification
  3. Why the assay cannot answer the question
  4. Stability: the same chemistry, plus an optical risk
  5. The commercial logic, without a price
  6. What the label and the purchase order have to name

Racemic alpha-lipoic acid, CAS 1077-28-7, and R-alpha-lipoic acid, CAS 1200-22-2, are the same molecule in different optical composition: a roughly 1:1 mixture of the R and S enantiomers against a single enantiomer. Both carry C8H14O2S2 and molecular weight 206.33, so assay, infrared and the sulfur figure describe both equally well. The chiral result, the melting behaviour and the label name are what separate them.

In one line

The two forms share a formula, a molecular weight and an assay method, so only a chiral result, the melting behaviour and the label name separate them — and those are exactly the lines the purchase order has to carry.

Two CAS numbers, one molecule

Alpha-lipoic acid has one stereocentre, so the molecule exists as two mirror-image enantiomers. A synthesis that does not control that centre gives both in equal amount; a route that controls it, or a resolution step, gives the R grade. The connectivity is identical, so formula, molecular weight and sulfur cannot tell them apart.

Racemic alpha-lipoic acid against R-alpha-lipoic acid
PropertyRacemic gradeR grade
CAS number1077-28-71200-22-2
Formula and molecular weightC8H14O2S2, 206.33C8H14O2S2, 206.33
Optical compositionR and S, about 1:1; no net rotationThe R enantiomer; dextrorotatory
Melting point60–62 °C, the racemic gateIts own range on its specification
Assay by HPLC99.0–101.0%Its own limit; same achiral method
Optical purity evidenceNot applicable; both enantiomers are in scopeChiral HPLC or polarimetry; a ratio or ee figure
Label nameAlpha-lipoic acidR-alpha-lipoic acid

What the optical form means on a specification

The racemic grade is defined by what it is not: a certificate can state the CAS number and the assay with no optical line, because both enantiomers are in scope. The R grade needs a positive statement — an optical purity limit and the method behind it. Polarimetry gives a net rotation; chiral HPLC gives two peaks and therefore a ratio. A name without an optical figure is a name, not evidence.

Enantiomeric excess is (R − S) ÷ (R + S) × 100. A lot at 99% ee is about 99.5% R and 0.5% S, not 99% R, which matters when the label declares an R amount. Optical purity is a separate line from the assay, and the two move independently.

The R configuration is the one that occurs in nature; the racemic grade is the synthetic mixture most of the category has used. That is chemistry, not a claim about a finished product.

Why the assay cannot answer the question

Reversed-phase HPLC separates by hydrophobicity. The enantiomers have the same hydrophobicity in an achiral mobile phase, so they elute as one peak with the same retention and ultraviolet response. A certificate at 99.5% by HPLC fits the racemic grade, the R grade and any mixture between. Infrared and the 31.1% sulfur figure are the same for both, because the atoms are the same.

The melting point moves in one direction only. The catalog sets 60–62 °C for the racemic solid, a racemic compound with its own packing; a single enantiomer packs differently and melts over its own range. So 60–62 °C is evidence about the racemic grade, not a gate that transfers; an R-ALA certificate carrying it is worth a query.

A named chiral method closes the question. The HPLC method note explains why an achiral separation cannot resolve an enantiomer pair; the identity page sets the chiral result into the wider evidence.

Stability: the same chemistry, plus an optical risk

Both grades degrade the same way: light and heat drive the dithiolane ring and the colour, moisture raises the loss on drying and softens a powder that melts near warehouse temperatures, and oxygen acts at surfaces and in solution. The R grade is not more stable for being a single enantiomer; the pack and matrix still decide.

It does add one failure mode. The optical purity can fall while the assay holds: heat, alkaline pH and a long hold in a basic matrix give the stereocentre a route to lose its configuration. Where the label declares an R amount, the chiral line belongs on the stability protocol, not only on the release certificate.

The R grade usually moves in smaller packs, so a kilogram is opened and resealed more often, and each opening is a light and moisture event. The stability page sets out the protocol for the ingredient and the pack.

The commercial logic, without a price

The R grade is more demanding to make, and the reason is the route rather than the molecule. A racemic synthesis makes both enantiomers in one pass; the R grade needs the mixture resolved or the stereocentre controlled, the unwanted S enantiomer is yield that still has to be paid for and disposed of, and the chiral release test is an extra method on every lot. An R quotation is built on its own specification and is not comparable with a racemic one unless pack, assay basis and optical purity limit agree.

A comparison by powder weight is the second trap: half of a racemic kilogram is the S enantiomer, so a formula that requires a defined amount of R needs roughly twice the racemic mass before any overage. The comparison belongs at the label dose — powder mass × assay × R share gives the delivered R.

A change between the grades is a change control in either direction — new specification line, label, stability file and market check — because the two grades do not share a CAS number. The grades page places this decision beside the particle-size choice.

What the label and the purchase order have to name

The label names the form the file covers. In the United States the Supplement Facts panel names the dietary ingredient, and “R-alpha-lipoic acid” is not the same declaration as “alpha-lipoic acid”. In the EU and Great Britain a product-specific route attaches to a named form, so a racemic file does not automatically cover the R grade. The buyer's regulatory team confirms the route, and the compliance page lists the documents.

Delivered R enantiomer at a declared label amount
Powder weighedAssayR shareDelivered R
100 mg racemic alpha-lipoic acid99.0–101.0%About 50%About 50 mg
100 mg R-alpha-lipoic acid at a stated 98% eePer specificationAbout 99% of the enantiomersAbout 98 mg

The arithmetic is not a dose recommendation; it keeps panel, weigh-up and certificate in agreement. A label declaring 100 mg of R-alpha-lipoic acid against a formula built on 100 mg of racemic powder differs by about half of that amount.

On the purchase order write the form and CAS number, the assay with its basis, the optical purity limit and its method, the melting-point line that applies, the pack and the retest period. A line reading only “alpha-lipoic acid 99%” leaves the decision to the supplier. The product hub carries the catalog specification; the COA page shows where the optical line sits; the assay glossary entry defines the basis.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation