02 Grade comparison

Alpha-lipoic acid grades: the optical form comes before the powder

Technical document 02 · Reviewed 2026-11-19 · Alpha-Lipoic Acid

On this page
  1. Why one name covers two materials
  2. The grades side by side
  3. Powder, crystal and flow
  4. Dosage form and the label quantity
  5. What to write into the specification
  6. When the other grade is the wrong choice

Alpha-lipoic acid is bought in two optical forms and two practical powder forms. The catalog grade is racemic alpha-lipoic acid, CAS 1077-28-7, a yellow crystalline powder at 99.0–101.0% by HPLC and ≥95% through 40 mesh. R-alpha-lipoic acid, CAS 1200-22-2, is a separate specification with its own assay, enantiomeric purity and label name; granulation changes flow and particle size, not the chemistry.

In one line

The optical form is the first grade decision and the particle size is the second, because the form changes the CAS number and the label while granulation only changes how the powder flows.

Why one name covers two materials

“Alpha-lipoic acid” on a purchase order names a molecule, not a specification. The racemic material contains the R and S enantiomers in equal proportion; the R-form is a single enantiomer with its own CAS number. Both have the formula C8H14O2S2 and the molecular weight 206.33, which is exactly why a certificate reporting only assay and appearance cannot tell them apart.

The second decision is physical: the standard 40 mesh powder or a granulated powder. The third is concentration: a diluted trituration is a different specification and a different label, not a grade of the pure material.

The grades side by side

Alpha-lipoic acid grades compared
PropertyRacemic powderGranulated racemicR-alpha-lipoic acid
CAS number1077-28-71077-28-71200-22-2
Optical compositionR and S, about 1:1R and S, about 1:1The R enantiomer
Assay by HPLC99.0–101.0%99.0–101.0%Set on the R-form specification
Melting point60–62 °C60–62 °CIts own range; this gate does not apply
Particle size≥95% through 40 meshCoarser, set by the granulationAs agreed
Label nameAlpha-lipoic acidAlpha-lipoic acidR-alpha-lipoic acid
AvailabilityCatalog gradeOn requestSeparate purchase

The R-form is not a premium version of the same certificate. Its optical purity is a specification line and needs a chiral test to report it; a racemic certificate has no such line because both enantiomers are within its scope.

Powder, crystal and flow

The catalog powder is yellow and crystalline, melts at 60–62 °C, is poorly soluble in water, and dissolves in ethanol and in alkaline solution. The 40 mesh limit means at least 95% of the powder passes a 425 µm sieve; the figure is a finishing specification, so it moves when the mill or the sieve changes without any change in chemistry.

Granulation improves flow, reduces dust and can raise bulk density, which helps a tableting line or a sachet fill. It also changes the particle-size distribution and may change the dissolution behaviour, so the specification, the certificate and the process validation have to move together. A granulated lot is still the same molecule; it is not the same powder.

A melting point that is close to warm ambient conditions is a handling fact. A bag left in a hot vehicle or against a sunny wall can soften and cake even if it never melts fully, and a caked powder no longer meets its sieve result.

Dosage form and the label quantity

The catalog applications are capsules, tablets and powder blends. Because the material is poorly water-soluble, a drink mix is not a natural fit; if a beverage is wanted, the formulator has to solve the solubility and the solution stability rather than assume the powder disperses. A capsule or tablet uses the 40 mesh powder, or the granulated grade when flow and fill weight control matter.

The label quantity is alpha-lipoic acid, not powder weight. At 99.0–101.0% assay, a 100 mg label needs about 99–101 mg of powder before any overage, and the overage decision belongs to the brand and its stability data. For the R-form the arithmetic has a second factor, the enantiomeric purity, because only the R enantiomer counts toward an R-ALA label. Neither calculation is a dose recommendation.

What to write into the specification

Write the grade into the specification rather than leaving it to the order:

  • “Racemic alpha-lipoic acid, CAS 1077-28-7, C8H14O2S2, molecular weight 206.33.”
  • “Assay 99.0–101.0% by HPLC; state the basis and the loss on drying on the same sheet.”
  • “Identification by infrared and HPLC; melting point 60–62 °C.”
  • “Loss on drying ≤0.5%; heavy metals and microbiology as listed.”
  • “Particle size ≥95% through 40 mesh, or the agreed granulation profile.”
  • “Pack, storage condition and retest period for the pack being bought.”

When the other grade is the wrong choice

Do not accept a granulated lot when the process, the stability data and the label were validated on 40 mesh powder; that is a change control, not a packing preference. Do not accept a dilution when the label declares pure alpha-lipoic acid, because the carrier would have to be declared and the powder weight per label dose would double. Do not accept racemic material when the label names R-alpha-lipoic acid, and the R-form is not a drop-in for a file built on the racemic grade.

The product hub carries the catalog specification. The level-four comparison takes the optical question through the assay, the chiral test and the label; the COA page shows how the grade is reported; the stability page covers the pack; the identity page gives the tests that separate the forms.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation