03 Stability

Pea protein peptides are hygroscopic; the pack sets the shelf life

Technical document 03 · Reviewed 2026-11-19 · Pea Protein Peptides

On this page
  1. The powder: moisture, caking and browning
  2. The solution: soluble, and less forgiving
  3. What drives the change
  4. Setting up a stability protocol
  5. The finished formula moves the answer
  6. Where the shelf-life figure comes from

Pea protein peptides are hygroscopic, and the powder browns when moisture and heat meet residual sugars. Sealed in the foil pouch at a controlled temperature, the material holds its specification; opened in a humid room, it cakes and darkens. An aqueous solution is less stable than the powder, and the pack and the storage condition decide the shelf life that can be assigned.

In one line

Pea peptides are hygroscopic and prone to browning, so the moisture limit, the seal and the storage temperature decide the shelf life.

The powder: moisture, caking and browning

The moisture limit is ≤7.0%. That is a release gate, not a storage allowance. Peptide powders take up water quickly because the shorter chains expose more polar groups, and the water softens the particle, bridges the grains and turns a free-flowing powder into a cake. The same water feeds the browning reaction between peptides and any residual reducing sugar, which shows as a darker colour and a changed flavour before it shows on any certificate.

Keep the pouch sealed, keep the store cool and dry, and let a cold pack equilibrate to room temperature before opening so that condensation does not form on the powder. A desiccant helps in a humid filling room but is not a substitute for a seal. Record the date of opening and the in-use period; a folded-over foil pouch is not a closed pack.

The solution: soluble, and less forgiving

The catalog solubility is “soluble in water; the solution is clear to slightly turbid”. That behaviour is the reason the peptide is used in stick packs and drink mixes, and it is also why the solution is the less stable format. In water, heat, oxygen, pH and light act together, and a beverage process adds a pasteurisation or hot-fill step that the powder never sees.

A clear drink also shows every change: a haze, a colour shift or a sediment is visible in a way that a capsule never reveals. If a liquid is unavoidable, control the pH, keep dissolved oxygen low, protect the pack from light and prove the hold time before filling. Data from the bulk powder will not carry over to a drink: the matrix, the process and the pack each shift the rate.

What drives the change

Factors that move pea peptides during storage
FactorWhat it doesControl
MoistureCaking, loss of flow, higher water activitySealed pouch; dry store; desiccant where needed
HeatAccelerates browning and moisture damageControlled store; cool process
Residual sugarsBrowning with peptides; colour and flavour changeSpecify the carbohydrate fraction; control drying
OxygenOxidation of peptides and lipids; off-notesLow headspace; sealed pack; antioxidant if the formula allows
pHChanges solubility, clarity and browning rateValidate the matrix pH; buffer if needed
LightColour fade or darkening in solutionOpaque or foil pack; dark store
Metal ionsHaze and colour in solutionAvoid iron and copper contact

These factors interact. A warm, humid store is worse than the sum of moisture and heat alone, and a clear bottle on a windowsill combines light, oxygen and heat. The useful stability question is not whether pea peptides are stable, but which pack, at which condition, for how long.

Setting up a stability protocol

A useful protocol states the pack, where it is stored, when it is sampled and what is measured. Warehouse conditions are covered by 25 °C/60% relative humidity long-term and 30 °C/65% intermediate; 40 °C/75% accelerated storage puts the pack under stress. Add a light-exposure arm where colour matters, and a humidity challenge for a pouch that will be opened repeatedly.

Test protein, peptide content, moisture, appearance, solubility and microbiology at each point. For a stick pack or a beverage, repeat the work in the matrix at the process pH and heat load, and measure clarity as well as assay. Ask for the individual results rather than a pass verdict, with the pack and the lot family named. The summary should belong to the pack you will buy; the headspace and opening history of a 25 kg drum differ from those of a 1 kg pouch.

The finished formula moves the answer

A tablet or capsule runs at low water activity, yet its shell and excipients can still pass moisture; check the fill for caking and colour at release and after storage. In a stick pack the seal and the foil are the barrier, and a pinhole can fail without showing up in the powder result. A beverage combines heat, pH and oxygen, and a bar adds a water activity that can drive browning even at a moderate moisture.

Whether to add an overage is the formulator's call, and it is a label and stability question; it will not rescue a pack that admits moisture. Keep the peptide content and the protein figure on the specification through the shelf life, not only at release, because the two can drift with moisture.

Where the shelf-life figure comes from

We do not publish a single shelf-life number for pea protein peptides, because the pack and the way it is stored both determine it. The retest period is written into the specification and backed by stability data for that pack. A figure quoted without a pack, a storage condition and a test panel is a claim, not a shelf life.

At the end of the retest period, test the retained sample again before extending use. Do not extend on assumption, and do not transfer a bulk figure to a container that was repacked. The product page lists the standard packs. Release tests sit on the COA page, pack sizes and lead time on the MOQ page, and the release workflow on the quality page.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation