The regulatory file for pea protein peptides
Pea protein peptides are a processed plant protein ingredient, and the regulatory file is built from four things: the specification being bought, the certificate for the lot, the allergen and contaminant data, and the route the destination market allows. Pea has a long history of use as a food, but this page does not assert a novel-food, NDI or permitted-ingredient status for the hydrolysate; the buyer's regulatory team confirms the route for the destination.
The specification defines the powder; the market file shows which route, limits and label apply where it will be sold.
The four questions a file answers
A practical file answers four questions. What exactly is being bought, down to the specification revision? Which lot is in the pack, and what did the certificate measure on it? Which contaminant and labelling rules apply once the material is in a finished product? And what has to be re-checked if the source, the process or the packaging changes? The lot is covered by the certificate, the parameters by the technical data sheet, and handling by the safety data sheet. None of the three settles the market route.
Allergen and GMO declarations, the origin record, a residual-solvent statement and any customer-specific declaration belong in the same folder. If a declaration is missing for the lot, name the gap before the order rather than at the port. A dated list of documents is easier to audit than a folder of undated PDFs.
European Union
In the EU, the file rests on three things: the specification, the contaminant results and the label. General food law (Regulation (EC) No 178/2002), the food information rules (Regulation (EU) No 1169/2011), the contaminant regulation (Commission Regulation (EU) 2023/915) and the nutrition and health claims regulation (Regulation (EC) No 1924/2006) apply alongside any product-specific route, and the current consolidated text is the reference rather than a summary. The buyer's regulatory team decides which route applies in the destination member state and checks that the specification fits the material actually placed on the market.
Pea is not named in Annex II of the food information regulation as of this review, so the mandatory allergen list does not include it; the declaration still has to be truthful about the source and about cross-contact with the cereals, soy, peanut or other proteins on a shared line. Great Britain applies its own food information rules and register, and Northern Ireland follows the EU framework; the two are checked separately.
United States
In the US, the file turns on the identity of the dietary ingredient or food substance and on how it will be used. For a conventional food, the Federal Food, Drug, and Cosmetic Act, 21 CFR 117 and the labelling rules in 21 CFR 101 apply; for a supplement, the dietary-ingredient route under DSHEA and the 21 CFR 111 manufacturing rules apply, and the supplier should name the basis and show the document behind it. The buyer checks that this basis extends to the finished product and to the claim. Pea is not one of the major food allergens named in US law as of this review, but the label still declares the source and the shared-line controls.
The ingredient name matters. A hydrolysed protein is described as such on the label rather than as the intact isolate, and the spelling and order of the words follow the destination's rules. The label and the claim get their own review, separate from the certificate.
Contaminants in the finished dose
Contaminants have to be calculated at the finished dose, not only measured in the drum. The table is a starting point for a supplement file; the destination's current text and the daily dose fix the final figure.
| Parameter | Typical supplement reference | What the file should show |
|---|---|---|
| Lead (Pb) | 3.0 mg/kg in the supplement | Lot result, method, limit and the finished-product calculation |
| Cadmium (Cd) | 1.0 mg/kg in the supplement | Lot result and any category exception that applies |
| Mercury (Hg) | 0.10 mg/kg in the supplement | Lot result and method |
| Arsenic (As) | Customer or market limit | The agreed limit and the method, stated on the certificate |
Plant proteins carry the metals their soil carried, so a pea lot is not exempt from the panel because it is not a mineral ingredient. Arsenic is not harmonised for supplements at EU level as of this review; the buyer's own limit belongs in the specification, with the method and the detection limit. Convert the drum result to the finished dose: a lot result is judged against the supplement limit, not against the raw-material weight.
Labels and permitted claims
The protein content supports a nutrition claim only when the finished product meets the condition attached to that claim. In the EU, “source of protein” and “high protein” have energy-based conditions in Regulation (EC) No 1924/2006; in the US, “good source” and “high” or “excellent source” have daily-value conditions in 21 CFR 101.54. The peptide content is a compositional descriptor, not a nutrition claim, and it does not carry a permitted claim of its own.
No disease-related claim is made for this material, and none should be built on the certificate. The claim review belongs to the brand's regulatory reviewer, who checks the wording against the product, the form and the market. A certificate does not authorise a claim, and a claim does not alter the specification.
The document set
| Document | What it shows | Who provides it |
|---|---|---|
| Specification | The parameters, methods and limits being bought | Supplier, agreed with the buyer |
| COA | The lot result against that specification | Supplier, per lot |
| SDS | Handling, dust and storage hazards | Supplier |
| Allergen statement | The source and the shared-line controls | Supplier, per site |
| GMO and origin statements | The source of the pea and the processing route | Supplier |
| Residual-solvent statement | What the extraction and hydrolysis used | Supplier |
| Nutrition and amino acid data | The protein and the profile behind it | Supplier or laboratory |
Version numbers and dates belong on the list. A specification without a revision, or a COA without a lot code, cannot be tied to the pack that arrives.
Checks before the first order
- The specification version, the base protein and the hydrolysis route are named.
- The certificate, specification, SDS, allergen, GMO, origin and solvent declarations are on file.
- The metals are recalculated at the daily dose.
- The label name, the allergen declaration and the claim have been reviewed for the destination.
- A change of source, process or pack goes through change control.
- Offer, specification and certificate all point to one revision.
The product page carries the catalog specification; the identity page covers the analytical evidence; the COA page explains the lot certificate; the EU regulatory note and the US note give the framework references; the quality page describes the release file.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation