01 COA & batch testing

What the COA for calcium caseinate actually contains

Technical document 01 · Reviewed 2026-11-20 · Calcium Caseinate

On this page
  1. What the sheet has to list
  2. Dry basis, the nitrogen factor and the calcium figure
  3. Catalogue limit, release limit and lot result
  4. What moves between lots
  5. When an outside laboratory earns its fee
  6. Putting two offers side by side

A certificate for a calcium caseinate lot reports appearance, identification, protein by Kjeldahl with N × 6.38 on a dry basis, calcium by ICP-OES or titration, fat, ash, moisture, the heavy-metal panel, microbiology and particle size. The protein figure says how much casein is present; the calcium figure says which caseinate it is. Both need their method, and the protein needs its basis: the specification describes the grade, and the result belongs to the drum.

In one line

Read the certificate on the protein with its nitrogen factor and dry basis, the calcium with its method, and the moisture that converts the dry-basis protein to the as-is powder.

What the sheet has to list

The parameter list follows the agreed specification, not a certificate template. Composition and physical lines answer what the powder is and how it handles; contaminants and microbiology answer what came with it. For calcium caseinate, two lines carry more weight than the rest: the protein with its factor and basis, and the calcium that separates this salt from sodium caseinate and from a micellar grade.

Composition and physical parameters · calcium caseinate, catalogue limits
ParameterMethodRelease limit
AppearanceVisualOff-white to cream powder
Protein (dry basis)Kjeldahl, N × 6.38≥90.0%
CalciumICP-OES or complexometric titration1.0–1.5%
AshGravimetric, furnace≤4.0%
FatSolvent extraction≤1.5%
MoistureLoss on drying≤6.0%
IdentificationProtein profileConforms to the reference
Particle sizeSieve≥95% through 80 mesh

An identification line that says only “conforms” is weak on its own: the protein profile shows casein, and the calcium line shows the salt.

Contaminants and microbiology · calcium caseinate, catalogue limits
ParameterMethodRelease limit
Heavy metalsICP-MSPb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg
Total plate countPlate count≤1,000 cfu/g
Yeast and mouldPlate count≤100 cfu/g
E. coliEnrichmentAbsent
SalmonellaEnrichmentAbsent

The method column is part of the evidence. A calcium result without its technique cannot be compared across laboratories, and a plate count depends on medium, temperature and time.

Dry basis, the nitrogen factor and the calcium figure

Kjeldahl measures nitrogen and converts it to protein with a factor. For milk protein the factor is 6.38, which assumes nitrogen at about 15.7% of protein mass; the general 6.25 assumes 16%. A 90.0% result calculated with 6.38 becomes about 88.2% if the same nitrogen is multiplied by 6.25. The factor belongs beside the number, not in a method footnote.

The basis moves the figure further. This specification is on a dry basis, so the 6.0% moisture ceiling is outside the protein calculation. At that ceiling, 90.0% dry basis corresponds to 84.6% as-is (90.0 × 0.94), and a 20 g serving supplies about 16.9 g of protein. A purchase order that drops the basis is out by more than five percentage points before any analytical variation is counted.

Calcium is a separate measurement, not a conversion of the protein. The catalogue range is 1.0–1.5% measured as elemental calcium, and the certificate should state the method: ICP-OES, or complexometric titration with EDTA. A calcium oxide figure is not the same number. At 1.2% calcium, a 20 g serving carries about 240 mg of calcium, which belongs in the label calculation.

Catalogue limit, release limit and lot result

Three statements get confused. The catalogue limit is the window this grade is offered inside; the release limit is the narrower window agreed for a customer or a market; the lot result is what the laboratory measured. The first two are commitments, and only the third is evidence.

What the result column should contain
ParameterCatalogue limitResult column
Protein≥90.0% dry basisA measured percentage with the factor, basis and moisture
Calcium1.0–1.5%A measured percentage by ICP-OES or titration
Ash≤4.0%A measured percentage, read beside the calcium figure
Moisture≤6.0%A measured percentage
Heavy metalsPer elementA measured figure in mg/kg for each element
Particle size≥95% through 80 meshThe measured percentage through the sieve

“Conforms” is a conclusion, not a measurement; the reader should be able to reach it from the numbers on the page.

What moves between lots

Calcium caseinate starts with acid casein, and the casein starts with skim milk. Feed, stage of lactation and season move the protein and mineral content of the milk, and precipitation and washing only narrow that variation. The neutralisation sets the calcium: more calcium hydroxide bound to the protein lifts the calcium figure, and an under-neutralised lot can read low on calcium while the protein stays inside its window.

Drying shifts moisture, colour and dispersibility. A hotter dry gives free flow but slow wetting; a gentler dry holds more moisture and disperses more easily. Milling and sieving move the particle-size result, so the 80 mesh figure can change without any change in the protein chemistry.

Trends matter more than one result near an edge. Protein drifting low while ash climbs can point to a different casein wash; calcium climbing while protein stays steady can point to a neutralisation change. The calcium-to-protein ratio is the useful trend line: at 1.0–1.5% calcium and 90.0% protein, the powder carries about 12–18 mg of calcium per gram of protein.

When an outside laboratory earns its fee

Independent testing is worth it for a new source, a first shipment into a regulated market, a salt form the certificate does not prove, or a disputed result. The panel should answer the open question rather than repeat the sheet: protein by Kjeldahl, calcium, sodium and phosphorus by ICP-OES, ash, moisture, an amino acid profile, and the microbiological set.

The mineral panel separates the forms. Calcium at 1.0–1.5% with low sodium is consistent with calcium caseinate; a sodium figure near 1.0–1.5% points to sodium caseinate; a higher ash with native calcium and phosphorus points to a micellar grade. A milk-protein ELISA confirms that the powder is milk-derived, but it cannot separate the three, because all three are milk protein.

Add a melamine and cyanuric acid screen when the protein figure is the commercial driver, because a nitrogen-rich adulterant lifts Kjeldahl without adding protein. Chain of custody matters as much as the panel: the sample tested should be the sample retained, and the report should name the lot. The methods section explains what each technique proves; the quality page describes how the sample and lot record are kept.

Putting two offers side by side

Put six lines side by side: protein with its factor and basis; calcium and ash with the methods; fat and moisture; particle size and a dispersion result; the allergen statement; and the site and lot traceability. Two offers that agree on 90% protein and disagree on calcium, ash or moisture are not the same powder.

The second layer is the record: who made the lot, which casein batch went in, and what retained sample exists. The catalogue specification is on the calcium caseinate product page; the tests that separate the salt forms are on the identity page; the market rules are on the compliance page; the other salt is described on the sodium caseinate page; and the native-micelle alternative is on the micellar casein page.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation