05 Compliance

The regulatory file for calcium caseinate

Technical document 05 · Reviewed 2026-11-20 · Calcium Caseinate

On this page
  1. The four checks in the file
  2. European Union
  3. United States
  4. Contaminants and the finished-product calculation
  5. The label: the salt name, milk and calcium
  6. Claims and wording
  7. Documents to keep
  8. Pre-order checklist

Calcium caseinate is a milk protein food ingredient with a long history of use, so permission is rarely the obstacle. The file has to carry the edible-caseinate standard, the milk allergen, the calcium the powder brings to the nutrition panel, and the wording of any protein or calcium claim. The buyer's regulatory team confirms the destination route.

In one line

The regulatory file turns on three things: the edible-caseinate standard, the milk allergen and the calcium the powder brings to the nutrition panel.

The four checks in the file

Four checks make up the file. Is the material a permitted ingredient in the destination? Is the milk allergen declared? Are the contaminant results inside the limit for the product as sold? Does the label and claim wording match the form, the dose and the market? Each has a different owner; a file that answers three is incomplete.

Keep the specification, COA, allergen statement and artwork on one revision. The COA page shows the lot document, and the identity page covers the analytical evidence.

European Union

Edible caseinates have their own standard. Directive (EU) 2015/2203 sets a minimum of 88% milk protein on the dried extract, of which at least 95% is casein, and a maximum moisture of 10%; the name must indicate the cation. The catalogue here specifies ≥90.0% protein on a dry basis and ≤6.0% moisture, so it sits above the protein floor and below the moisture ceiling, as of this review.

Calcium caseinate is a food ingredient, not an additive, and carries no E number. Caseinates have a long history of use and are not, as far as this review can establish, a novel food; check the current novel-food catalogue for a new source. Supplements fall under Directive 2002/46/EC, which leaves protein ingredients to national rules.

Allergen labelling follows Regulation (EU) No 1169/2011: milk is on Annex II and has to be emphasised. The nutrition declaration must include calcium when it is present in a significant amount — 15% of the nutrient reference value per 100 g or 100 mL, or per single-portion package. The calcium reference value is 800 mg, so 100 g of this powder at 1.0–1.5% calcium carries 125–188% of it. Regulation (EU) 2023/915 carries the contaminant limits; Regulation (EC) No 1924/2006 carries the claim rules. The EU regulatory notes gather the references.

United States

Calcium caseinate has a long history of use, but the GRAS affirmation at 21 CFR 182.1748 is written for sodium caseinate, not the calcium salt. The supplier should name the basis it relies on — a self-affirmed GRAS position, a GRAS notice covering the use, or the history of use supported by the FCC monograph — and the buyer keeps that statement on file.

Milk is a major allergen under FALCPA, so the product must declare it in the ingredient list, a “Contains” statement, or both; a low lactose figure does not change that. Calcium is a dietary ingredient with a Daily Value of 1,300 mg, and it must be declared in the Supplement Facts panel when it supplies 2% or more of that value per serving; below that, a mineral may be declared as zero. A 5 g serving at 1.0–1.5% calcium supplies 50–75 mg, so the declaration is triggered at a small use level. Protein is declared against a 50 g Daily Value. The US regulatory note covers the framework.

Contaminants and the finished-product calculation

The contaminant panel is a finished-product calculation, not only a drum result; the destination text and the daily dose decide the limit.

Contaminant limits to confirm for a calcium caseinate supplement
ElementEU supplement referenceUS positionUK position
Lead (Pb)3.0 mg/kgNo federal supplement limit; state rules applyRetained GB limit; check the current text
Cadmium (Cd)1.0 mg/kgNo federal supplement limitRetained GB limit; check the current text
Mercury (Hg)0.10 mg/kgNo federal supplement limitRetained GB limit; check the current text
Arsenic (As)Not harmonised; member-state rules may applyNo federal supplement limitCheck the current GB text

The EU figures come from Regulation (EU) 2023/915 and apply to supplements as sold; an ingredient sold to a food manufacturer is assessed against the limit for the food category it enters. Arsenic is not harmonised at EU level, so the specification has to state the limit it is tested against; the catalogue applies it as a customer limit.

The label: the salt name, milk and calcium

The ingredient name has to be the salt in the drum: “calcium caseinate”, with the cation named; “casein” alone does not identify it. Milk must be emphasised in the EU and the UK and declared as a major allergen in the US, whatever the lactose figure.

The calcium follows the powder into the serving. At 1.0–1.5%, a 20 g serving carries 200–300 mg — 25–38% of the EU reference value of 800 mg and 15–23% of the US Daily Value of 1,300 mg — and a 30 g serving carries 300–450 mg. Those figures belong on the panel, calculated from the measured lot, not the catalogue midpoint.

“Dairy-free” is not available for a milk protein, and “lactose-free” is a separate claim with its own basis. The sodium caseinate page and the micellar casein page show how the label questions change with the cation.

Claims and wording

No disease-related claim is permitted, and this site publishes the specification without a health claim. Protein claims: in the EU, “source of protein” requires 12% of the energy from protein and “high protein” 20%; in the US, 10% and 20% of the Daily Value. Calcium claims: in the EU, “source of calcium” requires 15% of the nutrient reference value per 100 g, or 7.5% per 100 mL for a liquid, and “high calcium” twice those values; in the US, “good source” is 10% of the Daily Value and “high” 20%. Confirm with the market whether a supplement is assessed per daily portion or per 100 g.

A claim revision never reopens the specification; the certificate supports the material, not the claim.

Documents to keep

  • Specification with the revision, the salt form, the protein factor and dry basis, and the calcium method.
  • Batch COA with results and methods, including calcium and the allergen statement.
  • SDS, TDS, animal-origin and BSE/TSE statement for a milk-derived material.
  • GMP, HACCP or ISO certificates for the site; origin, non-GMO, halal or kosher statements where required.
  • Third-party report and the label artwork, where the market asks.

The product hub carries the catalogue specification; the methods section explains the assays; the quality page describes the release file.

Pre-order checklist

  1. Is the salt named on the specification and matched to the ingredient list?
  2. Is milk declared, with no dairy-free wording?
  3. Is calcium calculated from the measured lot and converted to the destination label?
  4. Are the contaminant results inside the limit for the product as sold?
  5. Is the supplier's regulatory basis for calcium caseinate on file?

COA, specification and artwork should be the same revision. The market notes for the EU, the US and the UK sit beside the file, and the form comparison is on the calcium versus micellar page.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation