04 MOQ & ordering

Calcium caseinate: MOQ, packaging and ordering

Technical document 04 · Reviewed 2026-11-20 · Calcium Caseinate

On this page
  1. Why 1 kg is the floor
  2. Packs and powder forms
  3. Dispatch and transit
  4. What the quotation must state
  5. A sample with a lot code
  6. Terms for the first order

Calcium caseinate is sold from a 1 kg foil pouch, with a 25 kg fiber drum for production. The standard dispatch window is 1–7 days. A quotation is only comparable when it names the salt and CAS number, the protein basis, the calcium figure, the pack, the destination and Incoterm, and the documents the importer will need.

In one line

The 1 kg pouch is the trial pack and the 25 kg drum is the production unit; the lead time and the documents belong to the same quotation as the powder.

Why 1 kg is the floor

One kilogram is enough for a bench trial, a retained sample and an independent check of the salt. It also travels as a parcel, which helps a formulator who needs powder before the production plan is fixed. The pouch has its own lot code, so the trial material can be traced to the batch it came from.

Repacking below 1 kg breaks that chain. The powder is divided from a larger lot, handled again and given a new record, and the pack the buyer receives is no longer the pack that was made. A 25 kg drum cuts the handling per kilogram but ties up inventory for longer. The minimum follows the smallest traceable pack, not a volume target.

Packs and powder forms

Standard calcium caseinate packs
PackNet weightTypical useNotes
Foil pouch1 kgTrial, sample, small batchMoisture barrier; reseal after opening
Fiber drum25 kgProductionInner liner; lot code on drum and liner
Instantized powder1 kg or 25 kgFaster wetting, less dustSame chemistry; new particle profile

Calcium caseinate is milled to 80 mesh, with at least 95% passing. Instantizing changes the powder, not the pack: the agglomerates wet faster and dust less, and the particle-size line moves. Order that form before the quotation, because it can add a production step to the schedule.

Dispatch and transit

The standard pack leaves 1–7 days after the order is confirmed. Picking, documents and handover to the carrier are inside that window; transit, customs and the customer's own release are outside it. A custom instantized lot gets its own date.

Put the dispatch date in the order confirmation; a range is not a date. A pouch normally ships as a parcel and a drum as a pallet, and the Incoterm sets who books the freight and who clears entry. The COA and the other lot papers should be in the same shipment as the powder.

What the quotation must state

Six details make two offers comparable:

  1. Salt and CAS number. Calcium caseinate, 9005-43-0.
  2. Protein and calcium. The nitrogen factor, the dry basis, and the calcium method and result.
  3. Amount and pack. 1 kg pouch, 25 kg drum, or an instantized form.
  4. Delivery and Incoterm. Where it ships and on which trade term.
  5. Paperwork. COA, specification, SDS, allergen statement, and any declaration the importer needs.
  6. Use and market. The intended category and the country where it will be sold.

A quotation that omits the market or the salt cannot be compared with another. The same powder can be inside the file for one destination and outside it for another. Commercial terms belong on the quotation.

A sample with a lot code

The 1 kg pouch is the lot a customer qualifies. Check the salt, protein, calcium, moisture and microbiology before scaling, and keep part of the same pack. The lot code should run from the pouch through the COA to the quotation.

A trial below 1 kg is a split, not the catalogue pack. It comes from a larger lot, gets its own handling record and should not be called the 1 kg foil pouch. Keep the split's lot code with the trial report; the bench powder and the production drum may be different lots.

Terms for the first order

Put the commercial and quality terms on one page: Incoterm, pack, dispatch window, specification revision, one COA per lot, the retained sample, the retest period and the change-control route. A quality agreement signed before the first production order is easier than a conversation after a shortfall.

If a lot falls outside the agreed specification, the evidence is the retained sample and a joint test against the named method. A photograph of the drum does not settle a calcium or protein result. The agreement should name the referee laboratory, say who pays for it, and set the return route before the first order.

The catalogue ranges are on the product hub; the release tests are on the COA page; the pack and store question is on the stability page; the destination rules are on the compliance page; the micellar casein page and the sodium caseinate page show the other casein forms; the methods section explains the assays, and the quality page describes release.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation