01 COA & batch testing

Reading a zinc picolinate COA: assay, ligand and zinc

Technical document 01 · Reviewed 2026-11-19 · Zinc Picolinate

On this page
  1. The certificate as a test report
  2. The basis behind the assay and the zinc figure
  3. Release limit versus batch result
  4. What moves between batches
  5. When to order an outside test
  6. What to compare between suppliers

A zinc picolinate certificate is a test report before it is a purity statement: it names the appearance, the IR and HPLC identity, the HPLC assay, the complexometric zinc result, the moisture, the metal panel, the microbiological counts and the sieve result, and it prints a method and a release gate against each. The catalogue gates are listed in the first table; a lot's measured values belong in the columns beside them. Read the assay and the zinc together, because either one alone leaves the form open.

In one line

The assay says how much zinc picolinate is in the drum; the ligand and the elemental zinc say whether it is zinc picolinate at all.

The certificate as a test report

A stranger should be able to repeat each test from what is written: a method name, a limit and a measured value answer that. A line that offers only a tick or the word “conforms” leaves the buyer trusting a conclusion.

On a picolinate lot one pair of lines matters more than the rest. IR and HPLC together say the material is the complex; appearance alone cannot carry an identity claim. The titration adds the metal, and the moisture result says whether the assay is being read on the powder as sold or on its dry matter.

Identity, assay, moisture and contaminants · zinc picolinate
ParameterMethodRelease limit
AppearanceVisualWhite to off-white powder
IdentificationIR and HPLCConforms to the reference
AssayHPLC98.0–102.0%
Zinc (Zn)Complexometric titration20.0–21.5%
Loss on dryingGravimetric≤1.0%
Heavy metalsICP-MSPb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg
MicrobiologyPlate count and absence testsAPC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent
Particle sizeSieve analysis≥95% through 40 mesh

Those figures are connected. A change in the assay moves the zinc figure, and a change in moisture moves both if the basis is not printed. Do the arithmetic before booking a test.

The basis behind the assay and the zinc figure

Two quantities sit on the same page: the HPLC assay is a percentage of the complex, the titration a percentage of the element. They cannot be checked against each other until both share a basis, and the basis belongs in the assay row, not a footnote.

The formula supplies the expected ratio. Two picolinate ligands at 122.10 g/mol each plus one zinc at 65.38 g/mol give 309.58 g/mol, and 65.38 ÷ 309.58 is 21.12% zinc. A pure complex therefore sits a little above the middle of the 20.0–21.5% catalogue range.

The edges of the two ranges touch. At 98.0% assay the zinc figure is 20.7%; at 102.0% it is 21.5%. A pair of results outside that band — a 99% assay with 23% zinc, say — describes a different material, not a bad assay.

Basis changes the reading, not the powder. A 99.0% result on the dried basis with 0.4% moisture is 98.6% as-is, and that carries 20.8% zinc; the same 99.0% read as-is carries 20.9%. One decimal is small; building the label and the weigh-up on the other reading is not.

Release limit versus batch result

A gate is not a result, and a result is not a pass. The buyer needs both: the boundary the lot was released against and the value the laboratory found. When the result column simply repeats the range, the document cannot show whether the lot sat at the edge or in the middle, and a trend across lots stays invisible.

What the result column should contain
ParameterRelease limitResult column
Assay98.0–102.0%A measured percentage with its basis and method
Zinc20.0–21.5%A measured percentage consistent with the assay
Loss on drying≤1.0%A measured percentage
Heavy metalsPer elementOne figure in mg/kg per element
MicrobiologyCounts and absenceThe lot's count and its absence statement
Particle size≥95% through 40 meshThe measured through-sieve percentage

Microbiology and heavy metals are where a summary hides the evidence. A total for heavy metals conceals which element drove it; an “absent” for microbiology without the count and the test portion conceals the sensitivity. Ask for the per-element figures and the counts.

What moves between batches

Chemistry moves some lines and processing moves others. The reaction and the crystallisation decide where the assay and the zinc land, and the two should travel together. Drying controls moisture. Milling and sieving decide the 40 mesh result, which can shift when the mill is serviced without a single change in the molecule.

A lone zinc result is a diagnostic. If the titration rises while the HPLC assay holds steady, some of the metal is arriving from a second source; if it drops, the complex is being diluted or the ligand is running in excess. Repeating the titration on the same sample will not separate those cases; the IR, the XRD screen and the batch record will.

Appearance is qualitative, and that is exactly why a shift deserves a question. Off-white covers a wide band, and a cream or grey cast inside it is not proof of a defect. It can follow a hotter drying step, a trace of iron or a longer hold.

When to order an outside test

Four situations justify paying for an outside laboratory: a supplier the buyer has not used, a first shipment into a market with its own enforcement, a label claim about the form that the supplier's sheet cannot support, and any result the buyer disputes.

Choose the panel to answer the open question, not to repeat the sheet. IR identifies the complex, HPLC quantifies it, the titration checks the metal, ICP-MS covers the metal panel, and XRD looks for crystalline zinc oxide. If the worry is the ligand, a free picolinic acid result tells the buyer more than a second assay.

Every screen needs its detection limit printed. “Not detected” with no limit describes the instrument, not the drum. Keep the sample and the report tied to the lot code, and send the referee the retained sample, the certificate and the specification when a result is contested.

What to compare between suppliers

Six questions reduce most supplier sheets to a fair comparison: what article and CAS; what assay result and on what basis; what zinc result and by which method; what identity evidence; what moisture; and what the contaminant and microbiological figures were for the lot. Two sheets that agree on zinc but not on the assay basis are quoting different powders.

Traceability is the second layer. The manufacturer, the picolinic acid source, the drying step and the milling step should be identifiable, and the lot code has to appear on the certificate, the pack and the retained sample. A certificate that is correct but belongs to another drum is still the wrong document.

The catalog specification sits on the zinc picolinate product page. The identity page sets out the tests that separate the complex from a blend; the grade page defines the presentations; the HPLC note and the titration note describe the two numbers; release is covered on the quality page.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation