Sodium selenite vs selenomethionine: the selenium figure and the label
Sodium selenite and L-selenomethionine deliver the same element from different molecules. The anhydrous salt is 45.66% selenium and the amino acid is 40.27%, so a 55 µg selenium dose needs about 0.12 mg of the salt or about 0.14 mg of the amino acid. The label must name the source, and the form changes the premix, the stability and the market file before it changes the dose.
Selenite carries about 45.7% selenium and selenomethionine about 40.3%, so the same microgram dose is a different mass of powder and a different word on the label.
Two forms, two chemical settings
Sodium selenite is an inorganic salt: selenium sits in the selenite ion at oxidation state +4, paired with two sodium ions, and the anhydrous form has a molecular weight of about 172.95. L-Selenomethionine is an amino acid: selenium replaces the sulfur of methionine, is covalently bound to carbon, and the molecule has a molecular weight of about 196.11. They are separate articles with separate CAS numbers, certificates and label names.
| Property | Sodium selenite | L-Selenomethionine |
|---|---|---|
| CAS number | 10102-18-8 (anhydrous) | 3211-76-5 |
| Formula | Na2SeO3 | C5H11NO2Se |
| Molecular weight | About 172.95 | About 196.11 |
| Selenium content | 44.0–46.0% (theoretical 45.66%) | 39.0–41.0% (theoretical 40.27%) |
| Selenium setting | Inorganic selenite, Se(IV) | Organic amino acid, selenium bound to carbon |
| Label ingredient | Sodium selenite | L-Selenomethionine |
| Water solubility | Freely soluble; solution neutral to slightly alkaline | Soluble; clear, colourless solution |
Neither name is a synonym for “selenium”. The element is what the nutrition panel declares; the form is what the ingredient list names.
The selenium figure and the mass per dose
The selenium figure connects the label to the weigh-out. Anhydrous selenite is 45.66% selenium, so 1 mg of selenium needs 2.19 mg of salt. Selenomethionine is 40.27% selenium, so 1 mg of selenium needs 2.48 mg of the amino acid. The amino acid needs about 13% more mass per milligram of selenium.
| Selenium dose | Sodium selenite (anhydrous) | L-Selenomethionine |
|---|---|---|
| 55 µg | About 0.12 mg | About 0.14 mg |
| 100 µg | About 0.22 mg | About 0.25 mg |
| 200 µg | About 0.44 mg | About 0.50 mg |
At these masses the pure materials are premix ingredients, not weigh-out ingredients for a production blend. A 0.1% selenium trituration would need 55 mg for a 55 µg dose, which is a weighable quantity; the carrier is part of the article and must be declared. The conversion from a label dose to a material mass is arithmetic, and the first thing to redo when a formula changes source.
State the basis. A 99.0% assay on the dried basis is not 99.0% of the powder as weighed. Convert with the loss on drying first, then apply the selenium factor. A dose built on the wrong basis is off by the water content, and the error is larger with the pentahydrate.
What the label has to declare
The label declares selenium; the ingredient list declares the source. In the EU, the ingredient list uses the entry that matches the form, and the nutrition declaration gives selenium in micrograms against the 55 µg reference intake. In the US, the Supplement Facts panel declares selenium in micrograms and as a percentage of the Daily Value, and the ingredient statement names the source, for example “Selenium (as sodium selenite)”.
“Selenium” alone is not enough. A pack that names the nutrient but not the source does not match a file built around one salt, and a pack that names selenomethionine while the drum is selenite is mislabelled. The certificate and the artwork must use the same form name.
If the material is a trituration, the carrier is an ingredient and belongs in the list. The selenium figure on the label is calculated from the diluted material, not from the concentrate. A granulation that adds a binder changes the formulation; one without a carrier does not change the ingredient list, but it still belongs in the specification.
Premix and process behaviour
The two forms fail differently in a blend. Selenite is an oxidant and is reduced by ascorbic acid, thiols and sulfites to elemental selenium, which is insoluble and can show as a pink or red discolouration. A premix that combines selenite with a reducing agent needs evidence that the blend is stable, not an assumption carried over from the certificate of the pure salt.
Selenomethionine is an amino acid and is not reduced to elemental selenium by ascorbic acid in the same way, but it is still an organic molecule in a matrix: moisture, oxidants, pH and heat belong in the stability work. The absence of the selenite discolouration is not a guarantee of stability.
The salt is hygroscopic; the amino acid is crystalline with a tighter moisture limit in its catalog. Both still pick up moisture in an open pack, and both need a sealed pack and a defined in-use period. Test the blend at the inclusion level you will use; a result on the pure powder does not describe a premix.
The form in the market file
The form is a market-file question. The EU permitted-forms list is form-specific, and the buyer's team checks the entry that matches the drum; sodium selenite, L-selenomethionine and selenium-enriched yeast are not interchangeable names on the list or on the pack. The maximum selenium level in supplements is set by Member States rather than harmonised, so the destination matters. EFSA's 2023 tolerable upper intake level of 255 µg/day for adults is a hazard reference, not a permitted maximum.
In the US, the ingredient needs a lawful basis for the exact form and use, and the Supplement Facts panel names the source. The Daily Value is 55 µg and the adult tolerable upper intake level is 400 µg/day. A form accepted in one market is not automatically accepted in the other, and a label written for one form does not transfer to the other.
The UK has its own retained list and claims register; Northern Ireland follows the EU framework. A product sold in both parts of the UK can need two files. The sodium selenite compliance page sets out the documents the file needs.
When each form fits
Choose sodium selenite when the formula needs the higher selenium figure, a small mass per dose, an inorganic salt that dissolves freely, or a source the existing market file already names. Choose L-selenomethionine when the label and the file are built around the amino acid, when a crystalline organic source is wanted, or when the premix cannot carry a reducing-agent-sensitive salt.
The choice is not a unit conversion. A formula built on one form has a label, a specification, a stability arm and a market file built around it; switching source means rebuilding those four. The two product specifications and the grade comparison are the place to compare before the switch: the sodium selenite hub, the L-selenomethionine page, the selenium yeast page and the grade page. The analytical methods are in the methods library, and the release workflow is on the quality page.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation