04 MOQ & ordering

Sodium selenite: MOQ, packaging and ordering

Technical document 04 · Reviewed 2026-11-19 · Sodium Selenite

On this page
  1. Why the minimum is 1 kg
  2. Packs and what they protect
  3. Lead time and dispatch
  4. What a quotation needs
  5. The sample is a lot, not a demonstration
  6. Terms to settle before the first order

Sodium selenite is supplied from 1 kg in a foil pouch and 25 kg in a fiber drum, with a catalog lead time of 1–7 days. A kilogram carries about 456 g of selenium, which is millions of 55 µg doses, so the minimum is a traceability and handling unit rather than a production quantity. A firm quotation needs the hydrate, the presentation, the quantity, the destination, the documents and the intended use.

In one line

A kilogram of sodium selenite carries about 456 g of selenium, so the minimum order is a handling and traceability unit, not a dose-sized one.

Why the minimum is 1 kg

The kilogram is the smallest pack that can be drawn from a released lot, sampled and traced without splitting a batch record. That is the reason for the minimum, not a volume target. A buyer who wants 100 g is asking for a sample, and a sample is handled as a portion of a lot with its own documentation.

The arithmetic shows how far a kilogram goes. At 45.66% selenium, 1 kg carries about 456.6 g of the element. At 55 µg per dose that is about 8.3 million doses; at 200 µg it is about 2.3 million. A single-SKU brand will not exhaust the pouch quickly, and a contract manufacturer moves to the drum for handling reasons, not because the pouch is short.

That mismatch is why the order conversation is usually about the presentation. A pure salt cannot be weighed into a low-dose blend at production scale, so a trituration or a granulated premix is the practical purchasing unit. A trituration is a separate article with a carrier, a lower selenium figure and its own label; the 1 kg minimum applies to the catalog salt, and a trituration is quoted on its own specification.

Packs and what they protect

Standard sodium selenite packs
PackNetFitsWatch
Foil pouch1 kgTrial, small batch, retained sampleReseal after opening; the seal is the moisture barrier
Fiber drum25 kgProduction and contract manufacturingInner liner; opening date; lot code on drum and liner
Granulated powderOn requestFlow and dust controlParticle profile; the chemistry is unchanged

The pouch is the qualification pack and the drum is the production pack. The foil is the moisture and light barrier; the seal is the weak point. The drum relies on its liner, so ask for the liner specification and whether a desiccant is included. The lot code on the pack, the certificate and the retained sample has to match; that three-way match is the traceability chain.

Granulation is a finishing step, not a dilution. It changes flow and bulk density and leaves the assay and the selenium figure alone. A granulated lot is a different presentation with its own particle-size range; write that range into the specification if flow matters.

Lead time and dispatch

The catalog lead time is 1–7 days for a released standard lot. That window covers picking, the document set and handover to the carrier; it does not include transport, customs clearance or the buyer's incoming inspection. Ask for the planned dispatch date and the lot code at the point of order, not at the point of dispatch.

Custom work adds time. Granulation is a production step, extra testing is laboratory time, and a destination that needs legalised documents or a specific SDS language adds administrative time. A trituration is a separate blend with its own uniformity test and its own lead time, so it should not be planned against the standard pack date.

Ask for the dispatch date for sodium selenite; 1–7 days is the quoted window, not a firm date. The pouch can travel as a parcel; the drum can go on a pallet. The Incoterm determines which party books carriage and clears the entry. Have the certificate, SDS and lot code travel with the lot, and inspect the seal on arrival, because the anhydrous salt is hygroscopic.

What a quotation needs

Six details turn a request into an offer that can be checked:

  1. Product and hydrate. Sodium selenite anhydrous, CAS 10102-18-8; the pentahydrate is a different CAS and a different quotation.
  2. Specification and basis. Assay range, selenium range, loss on drying, identity, metals and microbiology, with the assay basis stated.
  3. Presentation and pack. Powder or granulated; 1 kg pouch or 25 kg drum; any trituration named with its carrier.
  4. Quantity and delivery. The number of packs, the destination and the Incoterm.
  5. Documents. COA per lot, TDS, SDS, allergen and GMO statements, origin, and any market-specific declaration.
  6. Intended use and market. Supplement, food or another use, and the country where the product will be sold.

A quotation without the hydrate and the market is incomplete. The same salt name can describe the anhydrous article, the pentahydrate or a trituration, and the documents differ. We do not publish commercial terms on this page; they are stated on the quotation.

The sample is a lot, not a demonstration

The 1 kg pouch is the qualification sample. Test identity, assay, selenium, loss on drying and microbiology before scaling, and keep a retained portion from the same pack. The lot code on the sample, the COA and the quotation should match. A sample without a lot code is a demonstration, not a qualification.

Run the material through the real process: the blend, the fill, the press or the stick filler. Check uniformity at the inclusion level you will use, because a fraction of a milligram per dose is where segregation shows. If the trial raises a result the certificate does not explain, test the retained portion independently before asking for another sample.

If the project needs a smaller bench quantity, discuss it before ordering. A split from a bulk lot is a repack with its own traceability, not the catalog pack, and it should be documented as such. Do not assume that a bench sample and the production drum come from the same lot.

Terms to settle before the first order

The specification revision, the remaining shelf life on arrival, the document list and the quantity tolerance belong in the order. So do the quality terms: COA per lot, retained sample, retest period and the change-control route for a new source, a new hydrate or a new presentation.

Returns and replacements follow the quotation and the quality agreement. A lot that fails the agreed specification should be handled through the retained sample and a joint re-test, not through a photograph of the powder. Ask who pays for the referee test and which laboratory both sides accept.

The product hub carries the catalog specification; the COA page lists the release tests; the compliance page covers the market file; the MOQ glossary entry defines the term; the quality page describes the release workflow.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation