The regulatory file for sodium selenite: form, dose and label
The file for sodium selenite answers four questions: what exact salt and hydrate is being bought, whether the destination allows that form in the intended use, what selenium dose and contaminant ceilings apply to the finished product, and what the label may say. The supplier provides the specification, the lot COA and the SDS; the buyer's regulatory team confirms the route for the destination. The catalog limits are the raw-material specification, not a market authorisation.
The form, the selenium dose and the label wording are three separate regulatory questions, and the destination decides all three.
Four checks, one file
A regulatory file is not a certificate with a cover letter. It is a set of consistent answers: the article on the specification, the results on the lot COA, the route the destination allows, the dose in the finished product and the wording on the pack. One weak link makes the rest unverifiable.
The nutrient is selenium, but the ingredient is a specific form: sodium selenite, sodium hydrogen selenite, sodium selenate, L-selenomethionine and selenium-enriched yeast are separate names and separate entries to check. A file that says “selenium” has not named the ingredient.
The supplement route and the food-additive route are also separate. A form accepted in one route is not automatically accepted in the other, and a supplement specification may not carry the documentation a food-additive file needs. The buyer's team decides the route.
European Union
The EU framework has four layers. Directive 2002/46/EC covers food supplements, with Annex I for the nutrients and Annex II for the permitted forms. Regulation (EU) No 1169/2011 covers labelling and the selenium reference intake of 55 µg/day. Regulation (EU) 2023/915 sets contaminant maxima for food, including supplements. Regulation (EC) No 1924/2006 and Regulation (EU) No 432/2012 govern claims.
The maximum selenium level in supplements is not harmonised; Member States set national limits, so the destination matters. EFSA's 2023 opinion set a tolerable upper intake level of 255 µg/day, a hazard-based reference rather than a permitted maximum. The buyer's regulatory team checks the Annex II entry against the exact salt and hydrate, the national maximum and the current consolidated texts.
United States
In the US the first question is whether the exact form is a lawful dietary ingredient for the intended use. The route can be a pre-DSHEA marketing history, a GRAS conclusion, or a new dietary ingredient notification; the supplier names the basis, and the buyer confirms it covers the finished product. “Selenium is a nutrient” does not establish the basis for a particular salt.
On the label, the Supplement Facts panel declares selenium in micrograms and as a percentage of the Daily Value, 55 µg; the ingredient list names the source. The adult tolerable upper intake level is 400 µg/day. Manufacturing falls under the dietary-supplement cGMP in 21 CFR 111. There is no federal heavy-metal maximum specific to supplements; California's Proposition 65 and the finished-product dose can decide whether a warning is needed.
United Kingdom
Great Britain applies a retained version of the EU food-supplement rules. The permitted-forms list and the claims register are the GB versions, and the labelling rules are UK law; check the current text rather than assuming an EU entry or an EU-authorised sentence carries over. The reference intake is 55 µg/day.
Northern Ireland applies the EU regime under the Windsor Framework, so a lot for Belfast follows the EU column. A UK launch can therefore need two files, and the destination address decides which one applies.
Contaminants and limits
| Element | Catalog limit | EU food-supplement ceiling | US federal |
|---|---|---|---|
| Lead | ≤3 mg/kg | 3.0 mg/kg | No general limit |
| Arsenic | ≤2 mg/kg | No harmonised limit; national rules | No general limit |
| Cadmium | ≤1 mg/kg | 1.0 mg/kg (3.0 for seaweed-based) | No general limit |
| Mercury | ≤0.1 mg/kg | 0.10 mg/kg | No general limit |
The catalog column is a raw-material limit; the EU column is written for the supplement as sold. They are not interchangeable. At a 55 µg selenium dose the selenite mass is about 0.12 mg, so the raw material contributes a very small share of the capsule; the excipients, the shell and the water are often larger contributors. The finished-product calculation is still required, and a raw-material result is not a label statement.
Arsenic is the line to watch because there is no harmonised EU maximum for supplements; the catalog limit of 2 mg/kg is a customer specification. A total-arsenic method should state the digestion and the detection limit; a speciation result is a different test.
Claims and label wording
No disease-related claim belongs on a sodium selenite pack. In the EU, a claim must be on the authorised list and match its conditions; in the US, a structure/function statement must be truthful, substantiated and disclaimed. The ingredient name is not a claim, but it must match the certificate.
“Selenium” describes the nutrient; “sodium selenite” describes the ingredient. A pack that names the nutrient but leaves the source generic does not match a file built around the salt. Conversely, a sentence written for another selenium form should not be assumed to fit this one.
Nothing on this page is a claim for the ingredient. The label sentence belongs to the brand's reviewer, and the evidence belongs in the brand's file.
The document pack
| Document | What it proves | Who issues it |
|---|---|---|
| Specification | The agreed article, hydrate and limits | Buyer and supplier |
| Lot COA | The results for this lot | Manufacturer |
| TDS | The technical description and presentation | Manufacturer |
| SDS | Handling and hazard information | Manufacturer |
| Allergen and GMO statements | Whether a declarable allergen or GMO is present | Manufacturer |
| Origin statement | Where the lot was made | Manufacturer |
| Contaminant and microbiology results | The panel against the limits | Manufacturer or laboratory |
| Packaging declaration | Food-contact suitability of the pack | Pack supplier |
Every document should carry the lot code or point to it. A generic TDS and a lot-specific COA are not a matched pair unless article, hydrate and pack agree. Two declarations are easy to forget: non-irradiation and no ethylene oxide treatment.
Checklist before the first order
| Check | Evidence | Red flag |
|---|---|---|
| Form and hydrate | Specification and COA name the CAS | “Sodium selenite” with no hydrate |
| Destination route | The buyer's regulatory note for the market | An EU entry assumed to cover the US |
| Selenium dose | µg per day and the finished-product calculation | A salt mass presented as selenium |
| Contaminants | COA results at the daily dose | A raw-material limit pasted onto the supplement |
| Label source | Ingredient list names the salt | “Selenium” with no source |
| Claims | Authorised wording or a disclaimed structure/function statement | A disease claim |
| Documents and change control | Lot code on the file; a new label for a new source | Generic documents with no lot link |
Seven checks, seven pieces of evidence. The product hub carries the catalog specification; the COA page shows the lot results; the identity page covers the form tests; the methods library describes the analytical work; the quality page describes the release file.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation