03 Stability

Selenium yeast is stable dry; moisture and the matrix decide the rest

Technical document 03 · Reviewed 2026-11-19 · Selenium Yeast

On this page
  1. Why the dry state matters
  2. Dispersion is not a solution
  3. What moves the powder
  4. A stability protocol
  5. What the formula does to it
  6. Setting the shelf life

Selenium yeast is a dried yeast powder. Sealed and kept dry, it holds its selenium and protein for the shelf life set by the stability file. Moisture is the main risk: it causes caking, browning and microbial growth, and the yeast matrix decides how quickly the powder takes water up. Heat, light and an open pack accelerate the change.

In one line

Dry and sealed, the powder is stable; moisture and the yeast matrix decide the rest.

Why the dry state matters

The selenium in the powder is largely covalently bound in organic species, and that bond is not volatile at normal storage temperatures. A sealed pack at low moisture therefore has little chemical reason to lose selenium. The release limit for moisture is ≤6.0%, and the pack is the barrier that keeps the powder near that figure.

Dry does not mean sterile. The microbiological specification allows an aerobic plate count of up to 30,000 cfu/g and a yeast and mould count of up to 100 cfu/g, with E. coli and Salmonella absent. Those are release limits for a dried food ingredient, not a promise that the powder can be left open in a humid room.

Dispersion is not a solution

The powder disperses in water; it does not form a clear solution. The yeast cells and the protein hydrate, swell and settle, and the dispersion is opaque. That is a physical difference from a crystalline salt, and it changes how a wet process has to be run: agitation keeps the particles suspended, and the water activity of the finished mix, not the clarity of the dispersion, decides the microbial risk.

In a wet blend, the selenium species can leach into the water phase, and the protein can foam. A liquid or gel format needs its own stability work; the dry-powder shelf life does not transfer to it.

What moves the powder

Storage and formula factors · selenium yeast
FactorEffectControl
MoistureCaking, browning, microbial growth≤6.0% release; sealed liner; desiccant on request
HeatDarkening; oxidation of free speciesModerate drying; cool storage
Oxygen and lightColour drift, off-odourClosed pack; opaque liner
pH in wet mixesProtein solubility and species driftKeep the mix near neutral; test the formula
CompressionTablet hardness; local moistureGranulation and lubricant choice

A stability protocol

A stability protocol is a set of measurements, not a promise. A standard design holds the sealed pack at 25 °C/60% RH for long-term data and at 30 °C/65% RH and 40 °C/75% RH for accelerated data, with tests at 0, 3, 6, 12, 18 and 24 months. The parameters are total selenium, protein, moisture, appearance, the micro panel and, at the start and the end, a speciation check.

Test the pack that will be sold, not only the bulk powder. A 1 kg foil pouch and a 25 kg drum have different headspace, different liner area and different opening histories. Record the lot, the pack, the storage condition and the test method with each point; a shelf life without that record is an assertion.

What the formula does to it

In capsules and tablets, the excipients are the water source. A hygroscopic filler or a wet granulation can raise the local moisture above the powder's release limit, and the tablet press adds heat and pressure. Choose excipients with low water activity, control the granulation end-point, and test the finished unit for moisture and selenium at release and at the end of shelf life.

In sticks and drink mixes, the stick film is the barrier, and the sugar or maltodextrin in the blend can pick up water. In gummies and chews, the water activity of the matrix is the deciding variable; the yeast powder is a minor ingredient, but the protein and the colour can change the finished product. The overage is a formulation decision; the stability data should support the label at the end of the shelf life, not only at release.

Setting the shelf life

A 24-month shelf life in the sealed pack is common for a dried yeast powder, but the date has to come from the stability file for the actual pack and the actual specification. The label should state the storage condition the date assumes: dry, cool, out of direct light, pack closed.

An opened pack is a different product. Reseal it, keep it dry, and use it within the working period the supplier states. If the powder is caked, discoloured or smells different, the certificate for the lot does not tell you that the pack is still good; the pack does.

The COA page shows the release tests that the stability work repeats; the MOQ page covers the packs and the storage label; the microbiology method note explains the counts; the quality page describes the lot record; the product hub is selenium yeast.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation