05 Compliance

Where selenium yeast is permitted, and what the file must show

Technical document 05 · Reviewed 2026-11-19 · Selenium Yeast

On this page
  1. The five checks
  2. European Union
  3. United States
  4. United Kingdom
  5. The contaminant table
  6. Claims and labelling
  7. The document pack
  8. What to check before the first order

Selenium-enriched yeast is a permitted selenium source for food supplements in the EU and the UK, and it is used as a dietary ingredient in the US, where the exact form needs a lawful basis. Permission is only the first check: the EU also sets a specification for the yeast, and each market has its own contaminant, labelling and claim rules. This page maps those checks as of this review; the current legal text in the destination market decides.

In one line

Permission, specification, contaminant ceiling, label and claim are five separate checks, and each market answers them differently.

The five checks

Selling selenium yeast into a market raises five questions. Is the form on the permitted list? Does it meet the market's yeast specification? Which contaminant ceiling applies to the finished supplement? Does the label name the source and declare selenium correctly? And is the statement an authorised claim, a structure/function statement, or not allowed at all?

The answers do not travel together. A form accepted in one country can be unlisted in another, and a US structure/function statement is not thereby an authorised EU health claim.

European Union

In the EU, selenium-enriched yeast appears in Annex II to Directive 2002/46/EC, the permitted-substance list for food supplements. The listing is not a general permission for any selenium-containing yeast. The Annex II entry describes yeast produced by culture in the presence of sodium selenite, with not more than 2.5 mg Se/g in the dried form as marketed. The predominant organic species is selenomethionine, at 60–85% of the total extracted selenium; other organic compounds, including selenocysteine, are limited to 10%; inorganic selenium is normally limited to 1%.

The catalog grade at 1,800–2,200 mg/kg sits below the 2.5 mg/g ceiling. A yeast grown with another selenium source, or a different species, is a different case: selenium-containing Yarrowia lipolytica biomass is a novel food under Implementing Regulation (EU) 2020/1993, not the Annex II ingredient.

Labelling follows Regulation (EU) No 1169/2011: the ingredient list names selenium-enriched yeast, and the nutrition declaration gives the selenium amount. The EU reference intake is 55 µg/day; there is no EU-wide maximum for selenium in supplements, though some Member States set national limits. EFSA revised the adult upper intake level to 255 µg/day in 2023, a ceiling from all sources, not a formulation target.

Annex II and the claim register change; read the consolidated text current on the day the label is approved.

United States

US law asks a different question first: is this exact form a lawful dietary ingredient? The route may be pre-DSHEA marketing, a GRAS conclusion covering the intended use, or a new dietary ingredient notification. The supplier should point to the route and the file; “selenium is an essential nutrient” is not, by itself, a basis for a particular source.

On the panel, selenium is declared as the element; the source sits in the ingredient list. For adults and children four and older, the Daily Value is 55 µg, and the tolerable upper intake for adults is 400 µg/day. Lead has no federal maximum specific to supplements, so California's Proposition 65 and the daily dose may decide whether a warning is needed. Manufacturing falls under the dietary-supplement cGMP rule in 21 CFR 111.

United Kingdom

The UK retained the Annex II list at IP completion day, so selenium-enriched yeast remains permitted under the food supplements regulations for England and the devolved equivalents. The entry carries the same specification: yeast grown with sodium selenite, no more than 2.5 mg Se/g, and the same species window. The UK reference intake is 55 µg/day; contaminant and labelling rules are now UK law and should be checked in their current form.

Northern Ireland follows EU food law under the Windsor Framework, so a lot for Belfast follows the EU column.

The contaminant table

Heavy-metal limits · EU food supplements, US and UK positions, and the catalog specification
ElementEUUSUKCatalog specification
Lead3.0 mg/kgNo federal maximum specific to supplements; Prop 65 may applyRetained limit; check current UK text≤2 mg/kg
ArsenicNot harmonised; Member State limits possibleCheck federal and state lawCheck current UK text≤1 mg/kg
Cadmium1.0 mg/kgCheck federal and state lawCheck current UK text≤1 mg/kg
Mercury0.10 mg/kgCheck federal and state lawCheck current UK text≤0.1 mg/kg

The EU column is written for the supplement as sold, not for the raw material; the raw-material limit has to be derived from the daily dose and the ingredient's share of the formula. Arsenic has no harmonised EU number, so a Member State may set its own. This table is a map of where to look, not a legal opinion.

The catalog specification is tighter than the EU ceiling for lead and equal to it for cadmium and mercury. That is a deliberate margin: 2 mg/kg lead in the raw material leaves room for the rest of the formula, but it does not replace the finished-product calculation.

Claims and labelling

The EU claim register under Regulation (EU) No 432/2012 contains selenium statements that may be used only with their attached conditions; they concern normal function, not disease. In the US, a structure/function statement is written and substantiated by the brand and must sit beside the DSHEA disclaimer. A disease claim is outside both frameworks.

Nothing on this site is a claim for the ingredient. The label sentence belongs to the brand, and the evidence belongs in the brand's file. The source name must match the form on the certificate: selenium-enriched yeast is not a synonym for selenomethionine or sodium selenite.

The document pack

A complete lot file usually contains:

  • A lot COA covering selenium, protein, moisture, particle size, contaminants and microbiology.
  • A TDS and purchase specification naming the yeast, the selenium source and the grade.
  • A speciation report, including the selenomethionine share and the inorganic selenium result.
  • An SDS following the 16-section format.
  • Statements on allergens, GMO status, origin and the selenium source used in the fermentation.
  • The US dietary-ingredient basis, where the market requires it.

Every document should carry the lot number or point to it. A generic TDS and a lot-specific COA are not a matched pair unless grade, source and pack agree.

What to check before the first order

Six questions to settle before the purchase order:

  1. Is selenium-enriched yeast permitted where the product will be sold, and does the label use the same source name?
  2. Does the lot meet the EU specification for selenium-enriched yeast, including the species window?
  3. Are the contaminant figures below the destination ceiling at the actual daily dose?
  4. Does the ingredient list disclose every selenium source, including any carrier or dilution?
  5. Is the label statement inside the authorised wording, or a properly disclaimed structure/function statement?
  6. Is the dietary-ingredient basis documented, and is the whole file tied to the lot?

The identity page explains the species window, and the COA page shows the parameters the file has to support. The hub carries the catalog specification, and the EU, US and UK notes expand each market.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation